Roll over image to zoom
SKU: ZN895-02/2B-3S
Lowara ZN895-02/2B-3S Stainless Steel 11kW Deep Well 8" Submersible Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Irrigation networks and consistent clean water lifting for municipal sectors utilize the ZN895-02/2B-3S multistage submersible pump. Part of the Lowara ZN895 series, this model provides high-volume extraction for borehole duty and fluid optimization. It is suitable for vertical installation in borehole wells or horizontal mounting in tanks provided motor immersion is maintained.
Manufactured from cast 316 Stainless Steel, the suction support and diffusers handle aggregated structural loads in deep wells. The two-stage configuration uses reduced diameter impellers rated to handle liquids with suspended sand content up to 100 g/m³. The pump assembly weighs 90.2 kg and operates in liquids reaching a maximum temperature of 25°C.
Performance metrics are driven by an 11 kW motor operating on a 415v supply with a rated current of 24.2 Amps for borehole duty. It achieves a maximum total head of 38.4 m and a maximum flow rate of 1966.7 L/Min at a speed of 2900 rpm. These performance capacities facilitate dedicated groundwater management for recreational complexes and industrial water distribution infrastructure.
Thermal protection includes Class F insulation and an IP68 enclosure rating for submerged borehole service life. The system supports installation depths up to 350 meters and features double mechanical shaft seals for containment. Internal tolerances are managed by technopolymer POM-C wear rings and EPDM 70 bearing bushes which support the duplex stainless steel shaft assembly.
FEATURES
- The integrated non-return valve features a stainless steel spring to prevent liquid backflow and water hammer.
- Stainless steel cable covers provide mechanical protection for the power leads along the pump casing.
- A stainless steel suction strainer is fitted to exclude large solid particles from entering the hydraulic stages.
- EPDM 70 bearing bushes support the pump shaft assembly and handle the mechanical loads during rotation.
- A duplex stainless steel taperlock system secures the semi-axial impellers to the shaft for torque transfer.
- Internal technopolymer POM-C wear rings maintain hydraulic clearances and reduce internal friction.
- Mechanical connection of the 8-inch motor follows NEMA standards to allow for compatibility with industrial systems.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What stainless steel specification is used for the pump body?
Long-term resistance against aggressive groundwater is ensured because the ZN895 02 2B 3S utilizes AISI 316 stainless steel pump construction.
Is this submersible motor built for three-phase electrical grids?
Driven by a robust 11 kW motor, the ZN895 02 2B 3S operates on standard 380–415 V, 50 Hz, three-phase power infrastructure.
How does the delivery port design limit reverse liquid flow?
The ZN895 02 2B 3S supports horizontal installation in pipeline booster stations provided a 3-degree minimum tilt is maintained.
What vertical lift capability does this multi-stage bore pump offer?
To achieve vertical dynamic lifts up to 38.4 m, the ZN895 02 2B 3S utilizes a high-efficiency multi-stage hydraulic assembly designed for heavy duty.
What maximum fluid delivery volume per minute is output?
Outputting up to 1966.7 L/min through its Rp 5" delivery port, the ZN895 02 2B 3S provides rapid fluid distribution for water networks.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us