Roll over image to zoom
SKU: ZN895-02-3R
Lowara ZN895-02-3R Stainless Steel 15kW Deep Well 8" Submersible Pump with Semi-Axial Flow Impeller
Australia-Wide
(08) 9240 2992
Official Lowara
Peace of Mind
Product Overview
Livestock management for industrial farms and municipal distribution networks utilize the ZN895-02-3R multistage submersible unit for aquifer extraction. This model features a Duplex Stainless Steel motor configuration and belongs to the ZN895 range. It allows for vertical installation in borehole wells or horizontal deployment provided motor immersion is maintained at all times.
Manufactured from cast 316 Stainless Steel, the diffusers and suction casing provide structural integrity for Aggressive borehole duty. The two full-diameter semi-axial impellers are rated for water containing suspended sand content up to 100 g/m³. The pump assembly weighs 102.2 kg and operates in liquids reaching a maximum temperature of 25°C.
The 15 kW motor utilizes a 415v supply with a rated current of 32.1 Amps for borehole duty cycles. It achieves a maximum total head of 53.8 m and a maximum flow rate of 2300 L/Min while operating at 2900 rpm. These specifications support intensive clean water lifting and pressure maintenance infrastructure in dedicated irrigation and residential water networks.
Safety containment features Class F insulation and an IP68 enclosure rating for deep borehole duty. The unit supports immersion depths reaching 350 meters and incorporates double mechanical shaft seals for containment. Internal wear rings manufactured from technopolymer POM-C and EPDM 70 bearing bushes support the duplex stainless steel shaft and maintain clearances.
FEATURES
- A duplex stainless steel taperlock system secures the semi-axial impellers to the shaft for torque transfer.
- Mechanical connection of the 8-inch motor follows NEMA standards to allow for compatibility with industrial systems.
- Stainless steel cable covers provide mechanical protection for the power leads along the pump casing.
- Internal technopolymer POM-C wear rings maintain hydraulic clearances and reduce internal friction.
- A stainless steel suction strainer is fitted to exclude large solid particles from entering the hydraulic stages.
- The integrated non-return valve features a stainless steel spring to prevent liquid backflow and water hammer.
- EPDM 70 bearing bushes support the pump shaft assembly and handle the mechanical loads during rotation.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How does the pump material build ensure submerged reliability?
Long-term resistance against aggressive groundwater is ensured because the ZN895 02 3R utilizes AISI 316 stainless steel pump construction.
Is a three-phase voltage supply required for this pump motor?
Driven by a robust 15 kW motor, the ZN895 02 3R operates on standard 380–415 V, 50 Hz, three-phase power infrastructure.
How is backflow controlled when the pump motor shuts down?
The ZN895 02 3R supports horizontal installation in pipeline booster stations provided a 3-degree minimum tilt is maintained.
How deep can this bore pump operate while maintaining vertical pressure?
To achieve vertical dynamic lifts up to 53.8 m, the ZN895 02 3R utilizes a high-efficiency multi-stage hydraulic assembly designed for heavy duty.
Which pipe diameter connects to the top delivery port?
Outputting up to 2300 L/min through its Rp 5" delivery port, the ZN895 02 3R provides rapid fluid distribution for water networks.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us