Roll over image to zoom
SKU: 96097394
Grundfos TP 65-130/4 Cast Iron 1.5kW Three Phase Inline Centrifugal Pump with Bronze Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Commercial HVAC distribution loops and industrial fluid transfer circuits receive forced water circulation from the TP 65-130/4 centrifugal inline pump. Powered by an electric 1.5 kW drive motor, the system processes clean liquid media across continuous operational duty cycles.
Fluid output parameters show a rated throughput of 497 L/Min and a maximum head limit of 13 m. Electrocoating treatment on the cast iron casing limits rust in hydronic loops. The internal rotor holds a bronze impeller with bronze wear rings. Unit physical weight is 74.5 kg.
Operating on a 415 V three-phase power supply, the electric motor yields 1.5 kW output power with a current draw of 3.56 Amps. Media temperature capabilities span from -25°C to 120°C under continuous line pressures up to 16 bar. Opposite DN 65 flanged ports suit direct pipe insertion.
Winding insulation complies with Class F standards within an IP55 dust and spray resistant motor housing equipped with PTC thermistors. Service procedures benefit from top-pull-out construction, permitting head disassembly without pipe disconnection.
Features
- DN 65 flanged ports suited for larger-bore commercial distribution piping.
- 1.5 kW motor rated at 3.56 Amps providing 497 L/Min flow at 13 m head.
- EN-GJL-250 cast iron pump body with electrocoating for internal corrosion resistance.
- Bronze impeller and wear ring assembly for clean water service applications.
- Lightweight design at 74.5 kg net weight for easier handling during installation.
- IP55 dust-tight and splash-proof motor housing with Class F insulation.
- Top-pull-out architecture allowing drive removal without disturbing connected pipe flanges.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 497 L/Min |
| Max Head | 13 m |
| Power | 1.5 kW / 415v |
| Rated Current | 3.56 Amps |
| Suitable For | Small Commercial Heating |
| Body Material | Cast Iron |
| Liquid Temperature | '-25°C to 120°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Supporting low-velocity boiler manifolds, what maximum dynamic lift is delivered on site?
Supplying gentle upward pressure to low-velocity headers, Grundfos TP 65-130/4 provides a dynamic lift of approximately 13 m.
In low-noise heating headers, what peak volumetric flow is sustained under four-pole operation?
In acoustic-isolated heating headers, TP 65-130/4 sustains a maximum volumetric flow rate of approximately 497 L/Min.
How are the internal rotating parts and pressure volute protected against fluid erosion?
Quiet hydronic containment in TP-65-130-4 is established by an EN-GJL-250 cast iron volute fitted with a precision-cast bronze impeller.
Across facility electrical distribution, how is this four-pole drive supplied in terms of amps?
Energy delivery to TP 65 130 4 is provided by a 1.5 kW four-pole motor operating on a three-phase 415 V line with a draw of 3.56 Amps.
In sound-isolated facilities, what media temperature boundaries and working pressure are allowed?
Safe fluid containment in TP/65/130/4 is preserved for circulating media from -25°C to 120°C up to a working pressure limit of 16 bar.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us