Roll over image to zoom
SKU: 93338828
Grundfos TPE3 32-330 Cast Iron Variable Speed Three Phase Inline Centrifugal Pump with Composite Impeller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Driven by an integrated 1.5 kW drive motor, the TPE3 32-330 single-stage inline centrifugal pump provides continuous liquid circulation across commercial HVAC networks, chilled water loops, and facility hydronic circuits. Its in-line structural layout incorporates matching DN 32 inlet and outlet flanges to streamline plant room pipework installation.
At full duty speed, hydraulic throughput reaches 333 L/Min with a maximum head threshold of 19.4 m. Casing construction uses robust electrocoated cast iron (EN-GJL-250) to resist internal surface oxidation. Fluid transfer is driven by a Composite impeller paired with an industry-standard BQQE shaft seal. Physical net weight is 36.3 kg.
Power requirements specify a 3 x 380-500 V Three-phase electrical supply rated for 1.5 kW output, with full-load running current measuring 2.9 Amps. Operating liquid temperatures span from -25°C to 120°C across active HVAC circuits. Standardized DN 32 suction and DN 32 discharge flanged ports facilitate direct line insertion.
The drive motor is housed within an IP55 rated enclosure featuring Class F winding insulation to protect against thermal stress. Built-in frequency control with an integrated PI controller enables automatic variable speed adjustment according to active hydronic load. Maintenance operations utilize a service-friendly top-pull-out design, allowing complete rotor disassembly while the cast iron housing remains fixed in the pipe run.
Features
- Maintenance-free BQQE mechanical shaft seal prevents fluid leakage and maintains seal integrity under elevated working pressures.
- IP55 motor enclosure protection guards internal electrical components against ambient dust accumulation and water splash ingress.
- Class F thermal motor insulation permits continuous operation under elevated fluid temperatures ranging from -25°C to 120°C.
- Equal suction and discharge port diameters enable straightforward inline installation without requiring custom pipe reducer spools.
- Integrated variable frequency converter with PI controller modulates motor RPM dynamically to balance flow demand and lower energy usage.
- Top-pull-out structural layout enables complete drive head and impeller extraction without disconnecting the pump casing from system piping.
- High-efficiency motor design delivers optimized hydraulic throughput with minimal electrical power consumption across variable duty cycles.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
SPECIFICATIONS
| Max Flow | 333 L/Min |
| Max Head | 19.4 m |
| Power | 1.5 kW / 415v |
| Rated Current | 2.9 Amps |
| Suitable For | Heating & Cooling Systems |
| Body Material | EN-GJL-250 Cast Iron |
| Liquid Temperature | '-25°C to 120°C |
| Inlet Size | 32 mm |
| Outlet Size | 32 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Through what thermal range can this pipeline unit convey water without compromising seal life?
System fluid temperatures from -25°C to 120°C are accommodated by Grundfos TPE3 32-330 with structural pressure containment up to 16 bar.
Under electronic differential pressure control, what peak dynamic head is maintained on site?
Responding dynamically to circuit pressure demands, TPE3 32-330 delivers a maximum dynamic head of approximately 19.4 m.
Across modulating secondary headers, what peak volumetric throughput is maintained under full speed?
Across modulating secondary distribution headers, TPE3-32-330 circulates an operational volume of approximately 333 L/Min.
To endure variable speed hydrodynamic stress, which alloys are selected for this housing?
The pressure boundary of TPE3 32 330 is precision-cast from EN-GJL-250 cast iron, complemented by an engineered composite impeller (PES-GF30).
How much electrical energy does this variable speed drive consume across voltage and amps?
Operating on a three-phase 415 V connection, TPE3/32/330 features a smart 1.5 kW motor with an operational current draw of 2.9 Amps.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us