Roll over image to zoom
SKU: 711181
Zenit DG BluePRO 100/2/G40V A1BT5 Cast Iron Direct Start Drainage Pump for Industrial Effluent with Vortex Impeller
Australia-Wide
(08) 9240 2992
Official Zenit
Peace of Mind
Product Overview
Engineered for industrial wastewater transfer and the lifting of soiled liquids in commercial stations, this vertical submersible unit handles liquid temperatures up to 40°C. It is rated for continuous S1 operation and is designed for fixed installation in collection wells. The manual configuration requires an external three-phase supply and control panel for start and stop management.
Hydraulic performance for the 0.74 kW motor includes a maximum flow rate of up to 450 L/Min and reaching approximately 11.5 m head. Operating on a three-phase 415 V supply, the unit draws a rated current of 2.15 Amps. The air-filled 2-pole dry induction motor is supplied with 10 meters of submersible power cable.
The hydraulic system utilizes a set-back vortex impeller with 40 mm free passage through the pump. This configuration provides a recessed flow path through the discharge port. It ensures reliable performance in industrial systems where solids are present.
Construction features a cast iron EN-GJL 250 pump body and motor frame with an AISI 431 stainless steel shaft. Shaft sealing is provided by two silicon carbide mechanical seals in an intermediate oil chamber. The assembly utilizes NBR rubber for all gaskets and O-rings and is protected by a bi-epoxy coating reaching 120 µm in thickness.
FEATURES
- Cast iron EN-GJL 250 construction ensures structural longevity in collection pits.
- Set-back vortex impeller design provides 40 mm free passage.
- Two silicon carbide mechanical seals in an oil-lubricated chamber provide isolation for the dry induction motor.
- Three-phase 415 V motor draws 2.15 Amps while delivering high-volume pumping and 11.5 m head.
- Bi-epoxy coating with 120 µm thickness provides resistance to environmental corrosion in industrial duty.
- AISI 431 stainless steel shaft and Class A2-70 screws provide mechanical stability for the rotating assembly.
- Supplied with a 10-meter power cable suitable for vertical installations in deep industrial collection wells.
- Class F electrical insulation and IP68 protection rating support safe service in soiled liquids reaching 40°C.
Model: ZEN-DGBLUEP100/2/G40VTEX
SPECIFICATIONS
| Max Flow | 450 L/Min |
| Max Head | 11.5 m |
| Power | 0.74 kW / 415v |
| Rated Current | 2.15 Amps |
| Suitable For | Sewage Pumping |
| Body Material | Cast iron EN-GJL 250 |
| Liquid Temperature | Maximum 40°C |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What electrical supply does this model require?
The DG_BluePRO_100_2_G40V_A1BT5 requires a three-phase 415 V supply with a rated current of 2.15 A; match the site connection before installation.
What cable or installation details are supplied?
The supplied 10 m submersible cable on DG BluePRO 100 2 G40V A1BT5 supports connection for fixed installation in collection wells or sumps.
Which construction features protect the motor during pumping?
DG-BluePRO-100-2-G40V-A1BT5 combines two silicon carbide mechanical seals in an oil-lubricated chamber with a cast iron body to protect the motor during the described drainage duty.
What motor features support its operating requirements?
The 0.74 kW motor in DG/BluePRO/100/2/G40V/A1BT5 drives the pump, while built-in thermal protection guards the winding against overheating during demanding drainage cycles.
How does the impeller manage solids in wastewater?
The set-back vortex impeller with 40 mm free passage on DGBluePRO1002G40VA1BT5 allows suspended solids to pass through the hydraulic section during wastewater pumping.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us