Roll over image to zoom
SKU: 711096
Zenit APBLUEP100/2/G40HTEX Cast Iron Manual 0.74kW Drainage Pump for Wastewater with High Head Impeller
Australia-Wide
(08) 9240 2992
Official Zenit
Peace of Mind
Product Overview
Targeting high manometric discharge heads and uniform fluid velocity paths during constant operation, the hydraulic design of the ZEN-APBLUEP100/2/G40HTEX pump facilitates continuous fluid pathways. This pump model from the BluePRO series is designed for pumping clear wastewater, rainwater and seepage containing small amounts of sand, decorative fountains in commercial sites. It is suitable for configurations with standard installations or connection to auto-coupling systems.
Constructed from Cast iron EN-GJL 250 surrounding the motor frame, the casting surrounding internal components features a high-tensile Stainless steel AISI 431 shaft. The cast iron EN-GJS 600 high head impeller processes solid matter with a maximum size limit of 6 mm. This unit weighs 19 kg and operates in liquids up to 40°C.
The 0.74 kW motor operates on a standard 415v supply with a nominal rated current of 2.70 Amps. The pump achieves a maximum head of 17.3 meters and a maximum flow of 360 L/Min through a 40 mm discharge outlet.
Motor winding thermal safety cutoffs are integrated with Class F insulation and an IP68 enclosure structure. This submersible pump is specified for installation depths in fluid media up to 10 meters. Dual mechanical two silicon carbide mechanical seals (2SiC) in oil sump provide containment.
Features
- Features a heavy four core three phase power cable type 4G1 with a length of 10 meters
- Includes built-in thermal relays inside the electrical motor stator windings for heat detection
- Utilizes a cast iron EN-GJL 250 structural base strainer for physical debris interception
- Incorporates bicomponent epoxy coating measuring 120 micrometers for material surface wear resistance
- Weighs 19 kg net mass excluding any external connection hardware and the main electrical cord
- Achieves a rated rotation speed of 2900 revolutions per minute on three phase connections
- Operates at a rated supply frequency of 50 Hz on alternating current industrial networks
SPECIFICATIONS
| Max Flow | 360 L/Min |
| Max Head | 17.3 m |
| Power | 0.74 kW / 415v |
| Rated Current | 2.7 Amps |
| Suitable For | Seepage Containing Small Amounts of Sand |
| Body Material | Cast Iron |
| Liquid Temperature | Maximum 40°C |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which supply is required for this three-phase model?
Commercial drainage sites can use APBLUEP100_2_G40HTEX for clear wastewater, rainwater and seepage containing small amounts of sand on three-phase power.
What type of water can the pump handle?
Clear wastewater, rainwater and seepage with small amounts of sand are intended liquids for APBLUEP100 2 G40HTEX, including use in decorative fountains.
How are the maximum flow and head rated?
The pump can deliver up to 360 L/Min and a maximum head of 17.3 m through the 40 mm outlet on APBLUEP100-2-G40HTEX.
What features help protect the motor during operation?
Thermal relays inside the stator windings monitor heat in APBLUEP100/2/G40HTEX, which also has Class F insulation and an IP68 enclosure.
Which discharge size and immersion depth are specified?
Thermal relays, Class F insulation and an IP68 enclosure are specified for APBLUEP1002G40HTEX in submerged drainage service for fixed installation.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us