ASM DS25 SG Iron 0.25kW Single Phase Transfer Pump
SKU: DS25

ASM DS25 SG Iron 0.25kW Single Phase Transfer Pump

$0.00 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official ASM Pumps
12 Months
Peace of Mind
Max Flow
23 L/Min
Max Head
6 m
Power
0.25 kW / 240v
Ideal Use
Trench Dewatering And Grease Trap

Product Overview

Service workshops, underground carparks, and small interceptor pits frequently need a self-priming sludge unit powered from standard single-phase utility outlets. Utilizing a mechanically reciprocated elastomer diaphragm rather than sliding seals, this single diaphragm pump survives indefinite dry running when sumps drain completely empty.

Delivering up to 23 L/Min across 25 mm BSPF suction and discharge ports, the pump develops up to 6 m max discharge head alongside 6 m self-priming suction lift. Generous internal flapper check clearances allow suspended solids up to 15 mm to pass without jamming or scouring.

Mechanical drive comes from a 0.25 kW single-phase 240V 1.95 A IP55 WEG electric motor spinning at 1480 rpm through an enclosed V-belt pulley assembly and gear reducer. Operating at up to 40 strokes per minute per IOM limits, its 460 grade oil bath requires checks at 10 hours, flushing at 100 hours, and replacement at 2500 hours.

Weighing 38 kg within a 435 x 320 x 380 mm envelope and 240 x 280 mm baseplate, SG Iron pump chambers fit standard Nitrile diaphragm and flapper valves with EPDM, Viton, or Teflon options. Service guides specify 0 to 2 mm diaphragm lip projection, 30 Nm center bolt torque with Loctite 243, and 25 to 32 mm suction / 32 to 40 mm discharge pipe ID.

FEATURES

  • Self-priming vertical suction lift up to 6 m and maximum discharge head up to 6 m
  • Nitrile diaphragm and flapper valves standard with EPDM, Viton, or Teflon elastomer options
  • Valveless single elastomer diaphragm displacement handles indefinite dry running without seal failure
  • 460 grade gear oil servicing at 100 h flush and 2500 h intervals with 0 to 2 mm lip setting
  • Passes suspended grit, grease, and soft solids up to 15 mm cleanly past flapper valves
  • Pumps up to 23 L/Min through matched 25 mm BSPF suction and discharge ports
  • Driven by a 0.25 kW single-phase 240V 1.95 A IP55 WEG motor via V-belt and gear reducer
  • SG Iron standard pump castings on a 240 x 280 mm baseplate weighing 38 kg complete
  • Covered by official ASM Pumps manufacturer warranty when plumbed to IOM pipe ID charts without undersized lines or dead-head throttling
SPECIFICATIONS
Max Flow23 L/Min
Max Head6 m
Power0.25 kW / 240v
Rated Current1.95 Amps
Suitable ForTrench Dewatering And Grease Trap
Body MaterialSG Iron
Inlet Size25 mm
Outlet Size25 mm
Warranty12 Months
Documents
Specification Datasheet Download
Installation Manual Download
Fitting Instructions Download

Restaurant grease traps and workshop wash bays install the DS25 single diaphragm pump on standard utility mains to evacuate viscous soapy kitchen sludge. Seal-less reciprocating action tolerates prolonged dry operation safely once submerged collection sumps drain empty between pump-out servicing visits.

  • Emptying grease traps
  • Draining wash sumps
  • Passing gritty sludge
  • Running dry safely

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Specification Datasheet
Download
Installation Manual
Download
Fitting Instructions
Download
Can this diaphragm sludge pump sustain total elevation head and dry sump running?

Vertical elevation capacity on the ASM DS25 SG Iron 0.25kW Single Phase Transfer Pump runs dry safely at up to 40 strokes per minute.

What construction alloys, inlet and outlet ports, and seals equip this pump?

Constructed in SG Iron at 38 kg with 25 mm BSPF ports and a Nitrile diaphragm, DS25 clamps at 0 to 2 mm lip and 30 Nm torque.

What manufacturer warranty provisions and installation rules apply to this pump?

Protected by ASM Pumps warranty terms, DS-25 mandates 25 to 32 mm suction and 32 to 40 mm discharge pipe IDs plus 460 oil changes.

How much volumetric throughput can this industrial pump move at operating speed?

Built to clear gritty sumps without vapor lock, DS 25 flows up to 23 L/Min at 6 m max head, 6 m suction lift, and 15 mm solids.

Which electric drive parameters and speed mechanics power this pumping unit?

Running on Single Phase 240V supply at 1.95 A and 1480 rpm, ASM D25 Diaphragm Pump (DS25) pairs a 0.25 kW IP55 WEG motor with V-belt and oil-bath gear drive.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed