Roll over image to zoom
SKU: DT50
ASM DT50 Aluminium E-Coated 1.1kW Three Phase Transfer Pump
Australia-Wide
(08) 9240 2992
Official ASM Pumps
Peace of Mind
Product Overview
Fleet washdown silt traps, quarry settling bays, and municipal sewage stations require higher flow volumes paired with large solids passage than small utility diaphragm units provide. Built around expanded two-inch bore waterways and steep angled valve chambers, this mid-sized diaphragm pump clears dense mud cleanly.
Moving up to 120 L/Min through full 50 mm BSPF suction and discharge ports, the pump holds 6 m maximum discharge head and pulls 6 m vertical suction lifts rapidly. Weighted flapper valves pass suspended stones, leaves, and fibrous ragging up to 35 mm diameter safely.
Mechanical power stems from a 1.1 kW three-phase 415V 2.4 A IP66 electric motor spinning at 1465 rpm via an enclosed V-belt pulley assembly and oil-bath gear reducer. Turning within a 40-stroke-per-minute IOM limit inside a protective belt guard, the drive handles repeated wet-and-dry sump cycles.
Aluminium AA601 pump chambers mount securely onto a steel baseplate with standard Neoprene diaphragms and options including Nitrile, Natural Rubber, EPDM, Viton, or Teflon. IOM guides specify 0 to 2 mm diaphragm lip projection, 60 Nm center hex nut torque with Loctite 569, and 40 to 50 mm suction / 50 to 80 mm discharge pipe ID.
FEATURES
- Develops 6 m maximum discharge head alongside 6 m rapid self-priming suction lift
- Neoprene diaphragm and valves standard with 460 grade gear oil servicing at 2500 h intervals
- 1.1 kW three-phase 415V 2.4 A IP66 motor coupled via guarded V-belt and gear reducer
- High 120 L/Min sludge displacement across 50 mm BSPF suction and discharge ports
- Lightweight Aluminium AA601 standard body with optional Cast Iron, Bronze, or 316 Stainless builds
- Passes chunky gravel, sludge clots, and rag solids up to 35 mm diameter cleanly
- Completely seal-less diaphragm chamber runs dry indefinitely without damage
- Precision 0 to 2 mm diaphragm lip fitting per IOM with 60 Nm center nut and Loctite 569
- Backed by official ASM Pumps manufacturer warranty conditional on IOM pipe ID compliance and zero dead-head throttling
SPECIFICATIONS
| Max Flow | 120 L/Min |
| Max Head | 6 m |
| Power | 1.1 kW / 415v |
| Rated Current | 2.4 Amps |
| Suitable For | Intercept Pit And Effluent Pumping |
| Body Material | Aluminium E-Coated |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which piping size rules and official warranty conditions apply to this pump?
Factory piping warranty on the ASM DT50 Aluminium E-Coated 1.1kW Three Phase Transfer Pump requires 40 to 50 mm suction and 50 to 80 mm discharge pipe IDs per IOM rules.
How much volumetric throughput can this industrial pump move at operating speed?
Sized for rapid sump evacuation, DT50 discharges up to 120 L/Min at 6 m max head while priming 6 m and passing 35 mm solids.
Which electric drive parameters and speed mechanics power this pumping unit?
Running on Three Phase 415V mains at 2.4 A and 1465 rpm, DT-50 couples a 1.1 kW IP66 motor via guarded V-belt and oil gear reducer.
Under what pressure envelope and thermal boundaries does the wet end operate?
Sustaining 6 m max head and 6 m suction lift with zero mechanical seals, DT 50 survives empty pit cycles at 40 strokes per minute.
Which wetted metallurgy, port connections, and physical mass specify this unit?
Built in Aluminium AA601 with 50 mm BSPF ports, ASM D50 Diaphragm Pump (DT50) clamps a Neoprene diaphragm at 0 to 2 mm lip and 60 Nm Loctite 569 nut torque.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










