ASM DT76 Aluminium E-Coated 1.5kW Three Phase Transfer Pump
SKU: DT76

ASM DT76 Aluminium E-Coated 1.5kW Three Phase Transfer Pump

$0.00 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official ASM Pumps
12 Months
Peace of Mind
Max Flow
220 L/Min
Max Head
6 m
Power
1.5 kW / 415v
Ideal Use
Thick Slurry And Pit Extraction

Product Overview

Quarry settling ponds, abattoir effluent screens, and mine washdown sumps require maximum solids passage and relentless suction pull to move viscous bottom cake. Representing the largest single diaphragm unit in the range, this three-phase sludge pump pairs expansive three-inch bore waterways with an industrial WEG drive.

Delivering up to 220 L/Min through full 76 mm BSPP suction and discharge ports, the wet end pushes slurry against 6 m max discharge head with 5 m vertical self-priming suction lift. Steeply chambered flapper valves pass suspended mud lumps, stones, and fibrous debris up to 60 mm cleanly.

Mechanical drive steps up to a 1.5 kW three-phase 415V 3.19 A IP66 WEG W22 electric motor running at 1465 rpm through a double section eccentric, guarded V-belt pulley transmission, and gear reducer. Operating up to 40 strokes per minute per IOM limits, dry running proceeds without thermal seal damage.

Weighing 80 kg on a Mild Steel E-Coated baseplate, the Aluminium E-Coated body equips standard Nitrile diaphragms and flapper valves with Neoprene, EPDM, or Viton options. IOM rules set 0 to 2 mm diaphragm lip projection, 60 Nm Loctite 569 center nut torque, 80 mm suction / 80 to 100 mm discharge ID, and 460 grade gear oil.

FEATURES

  • Zero mechanical seals or close-tolerance impellers let the unit run dry safely
  • Verified 80 kg Aluminium E-Coated chassis on a Mild Steel E-Coated mounting baseplate
  • 1.5 kW 3.19 A 1465 rpm IP66 WEG W22 motor coupled via V-belt and gear reducer
  • Achieves 6 m maximum discharge head alongside strong 5 m dry self-priming vertical suction lift
  • Nitrile diaphragm and flapper valves standard with 460 grade gear oil at 2500 h intervals
  • Clears coarse rocks, sludge solids, and fibrous waste up to 60 mm spherical diameter
  • Highest-capacity 220 L/Min slurry flow rate through 76 mm BSPP manifold ports
  • Follows IOM 0 to 2 mm diaphragm lip alignment and 60 Nm Loctite 569 center hex nut torque
  • Backed by official ASM Pumps manufacturer warranty conditional on 80 mm IOM pipework compliance and zero dead-head throttling
SPECIFICATIONS
Max Flow220 L/Min
Max Head6 m
Power1.5 kW / 415v
Rated Current3.19 Amps
Suitable ForThick Slurry And Pit Extraction
Body MaterialAluminium E-Coated
Inlet Size76 mm
Outlet Size76 mm
Warranty12 Months
Documents
Specification Datasheet Download
Installation Manual Download
Fitting Instructions Download

Abattoir paunch pits and mineral tailings trenches install the DT76 diaphragm pump to move dense sludge loaded with coarse organics and grit. Expansive bore clearances and coated aluminium housings keep dirty site sumps clear without internal clogging.

  • Pumping paunch sludge
  • Clearing tailings pits
  • Passing large solids
  • Pulling thick sediment

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Specification Datasheet
Download
Installation Manual
Download
Fitting Instructions
Download
What slurry throughput rate and maximum solid sphere passage does this unit support?

Coarse solids throughput on the ASM DT76 Aluminium E-Coated 1.5kW Three Phase Transfer Pump outputs up to 220 L/Min at 6 m head with 5 m suction lift and 60 mm solids.

Which electric drive parameters and speed mechanics power this pumping unit?

Running on Three Phase 415V mains at 3.19 A and 1465 rpm, DT76 drives a 1.5 kW WEG W22 motor through guarded belts and gear reducer.

Under what pressure envelope and thermal boundaries does the wet end operate?

Sustaining 6 m max discharge head and 5 m vertical lift without seals, DT-76 handles prolonged dry sump running within 40 strokes per minute.

Which wetted metallurgy, port connections, and physical mass specify this unit?

Built in Aluminium E-Coated castings at 80 kg with 76 mm BSPP ports, DT 76 clamps Nitrile diaphragms at 0 to 2 mm lip and 60 Nm torque.

How is factory warranty coverage structured alongside operating conditions?

Protected by ASM Pumps warranty rules, ASM D76 Diaphragm Pump (DT76) mandates 80 mm suction and 80 to 100 mm discharge pipe IDs plus 460 oil servicing.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed