Roll over image to zoom
SKU: RSE2AB-DC.5C-12
Aussie Pumps RSE2AB-DC.5C-12 12V DC 2" Ports Marine Self-Priming Transfer Pump with Polyester Wet End
Australia-Wide
(08) 9240 2992
Official Aussie Pumps
Peace of Mind
Product Overview
Yachts and workboats transfer fresh and salt water straight off the 12-volt bank with this half-horsepower DC Smart Pump, moving up to 252 litres a minute with no inverter or generator required. Battery-direct boating simplicity. Battery-direct 12-volt boating transfer is RSE2AB-DC.5C-12 for half-horsepower DC duty.
Open flow reaches 252 L/min, shutting off at 6.4 m head (9 PSI) at 50 Hz ratings. The 30% glass-filled polyester wet end with stainless-steel fittings runs an open impeller with a Buna N mechanical seal through 50 mm ports.
Direct battery connection defines the 0.5 HP 12 V DC motor, driving the pump straight from the vessel's bank with no inverter or generator in the loop. Marine pumping, freshwater transfer and saltwater transfer are the rated applications.
Freshwater transfer, saltwater transfer and general marine pumping are the stated duties for this battery-powered configuration. It suits vessel installations that need direct onboard water movement for tank transfer, general pumping and saltwater service without depending on shore power or a generator.
Features
- Loop-free 0.5 HP 12 V DC motor with direct battery drive removes inverters and generators from the loop.
- Flow of 252 L/min, shutting off at 6.4 m (9 PSI) at 50 Hz ratings transfers boat water at battery pace. Self-priming suction standard for boating.
- Bank-friendly glass-filled polyester wet end with stainless fittings resists harsh marine conditions.
- Fitting-proof stainless-steel hardware throughout survives saltwater service without any corrosion whatsoever guaranteed.
- Application-trio Buna N seal with an open impeller covers marine, fresh and saltwater transfer.
- Stainless-steel fittings support corrosion resistance across the listed freshwater and saltwater vessel duties.
- Covered by the 5 year Aussie Pumps pump end warranty and 1 year DC electric motor warranty.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How do internal synthetic rubber gaskets resist corrosive chemical attack across bulk liquid fertilizer tanks?
The chemical-resistant polyester housing on the Aussie Pumps DC Marine Chemical RSE2 DC (RSE2AB-DC.5C-12) tolerates corrosive crop chemicals and liquid fertilizers.
How is low voltage direct current wired to power this marine pump motor straight off vessel battery banks?
Direct current battery connections rated at 0.5 HP 12V operate the RSE2AB-DC.5C-12, eliminating the need for AC inverters during field transfer duties.
What maximum delivery throughput and dynamic elevation pressure are produced through connected piping?
Discharge performance for the RSE2AB-DC.5C-12 yields an open flow volume of approximately 252 L/min and reaches a maximum shut-off elevation of approximately 6.4 m.
What vertical intake reach does the priming chamber provide when drafting from low sumps once the casing is charged?
Built-in priming passages on the RSE2AB-DC.5C-12 draw fluid vertically from depths up to 7.6 m without requiring an external foot valve once the casing is filled.
Can the wet end clear solids laden water without jamming the rotating assembly across high volume transfer lines?
The open impeller on RSE2AB-DC.5C-12 transfers clean chemical solutions, liquid fertilizers and diesel.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us