Roll over image to zoom
SKU: RSE2AB-DC1C-12
Aussie Pumps RSE2AB-DC1C-12 12V DC 2" Ports Marine Self-Priming Transfer Pump with Polyester Wet End
Australia-Wide
(08) 9240 2992
Official Aussie Pumps
Peace of Mind
Product Overview
Full-horsepower 12-volt transfer doubles the flow for larger vessels in this 1 HP DC Smart Pump, pushing up to 378 litres a minute of fresh or salt water off the ship's 12-volt system. Maximum water on standard boat volts. Larger-vessel 12-volt transfer is RSE2AB-DC1C-12 with full-horsepower DC flow.
Delivery peaks at 378 L/min open flow, shutting off at 6.8 m head (10 PSI) at 50 Hz ratings. The glass-filled polyester wet end with stainless-steel fittings carries an open impeller with a Buna N seal and 50 mm waterways.
Standard boat volts deliver maximum flow through the 1 HP 12 V DC motor, connecting directly to the vessel's batteries for larger-boat transfer. Marine pumping, freshwater transfer and saltwater transfer run from the same direct drive.
This DC pump is specified for marine pumping, freshwater transfer and saltwater transfer aboard vessels. The listed duties suit onboard water movement between tanks, general pumping tasks and saltwater service where direct battery-powered operation is preferred over shore-powered equipment.
Features
- Volt-standard 1 HP 12 V DC motor for larger vessels doubles flow on standard boat volts.
- Flow of 378 L/min, shutting off at 6.8 m (10 PSI) at 50 Hz ratings serves bigger boats and longer runs. Self-priming lift built in as standard.
- Battery-direct glass-filled polyester construction keeps the pump light and completely corrosion-free always.
- Drive-proof stainless fittings with a Buna N seal handle saltwater transfer reliably.
- Transfer-trio open impeller with 50 mm ports covers marine, fresh and saltwater applications.
- Volt-standard backing with 5 years pump and 1 year DC motor covers larger-vessel transfer.
- Covered by the 5 year Aussie Pumps pump end warranty and 1 year DC electric motor warranty.
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What vertical intake reach does the priming chamber provide when drafting from low sumps across unflooded suction setups?
Built-in priming passages on the Aussie Pumps DC Marine Chemical RSE2 DC (RSE2AB-DC1C-12) draw fluid vertically from depths up to 7.6 m without requiring an external foot valve once the casing is filled.
What maximum delivery throughput and dynamic elevation pressure are produced under full operating speed?
Across open pipeline runs, the RSE2AB-DC1C-12 pushes fluid at a maximum throughput of approximately 378 L/min while attaining a shut-off head ceiling of approximately 6.8 m.
What spherical solids diameter can move freely through the open impeller waterways during dirty liquid transfer?
With the open impeller, RSE2AB-DC1C-12 batches clean chemicals without particulate solids.
How do internal synthetic rubber gaskets resist corrosive chemical attack during crop spraying batch operations?
Molded from glass-reinforced polypropylene, the RSE2AB-DC1C-12 withstands harsh agricultural chemicals, liquid feeds, and corrosive fertilizers.
How is low voltage direct current wired to power this marine pump motor without requiring inverter hardware?
Drive power on the RSE2 DC (RSE2AB-DC1C-12) is supplied by a direct current motor rated at 1.0 HP 12V, wired straight into vehicle or vessel battery banks without an inverter.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us