Roll over image to zoom
SKU: BS1F 1MXH 2005
Calpeda BS1F 1MXH 2005 Three Phase 5.5kW Fixed Speed Single Pump Multistage Booster System
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
High-rise commercial properties and multi-level hospitality complexes require a pressure boosting station that can push heated or chilled water up steep vertical risers without losing momentum. The BS1F 1MXH 2005 package centres around a single Calpeda MXH 2005 horizontal multistage pump, supplying flow rates up to 400 L/Min across Australian building services. Where high vertical lift is required, the multistage wet end can develop up to 81.5 m of head.
Automated command over the system is executed by differential pressure switches with a microprocessor control board that continuously evaluates downstream line pressure. When taps or valves open and pressure dips below the configured cut-in threshold, the processor engages the booster smoothly and sustains operation until demand subsides. Calibrated differential bands prevent rapid stop-start hunting, protecting contactors and mechanical seals from premature wear during fluctuating draw-off periods.
Incoming and outgoing water flows the skid through corrosion-resistant stainless steel AISI 304 suction and delivery manifolds engineered for minimal hydraulic friction. A 50 mm inlet header feeds the pump chamber cleanly, while the 40 mm discharge collector routes pressurised water out to the distribution riser. Dedicated isolation ball valves, an inline non-return check valve, an analogue pressure gauge, and a pre-fitted tank connection port simplify both installation and routine servicing.
Electrical power is supplied via a standard three-phase 415 V mains feed connected to a heavy-duty motor featuring a three-phase 400/690 V winding configuration. Operating on a 2-pole induction architecture at a nominal 2900 rpm (50 Hz), the drive complies with IEC 60034 standards and incorporates Class F thermal insulation, delivering 5.5 kW (P2) of shaft output while drawing a rated current of 6.2 A.
Key Features
- High-Head Multistage Impellers: Precision 5-stage stainless steel hydraulic assembly generates strong vertical lift and quiet, vibration-free operation.
- Microprocessor Pressure Management: Coordinates differential switch signals to automate cut-in and cut-out cycles without rapid motor short-cycling.
- Hygienic Stainless Headers: Fabricated from AISI 304 stainless steel across both suction and discharge manifolds to preserve water quality and resist corrosion.
- Broad Thermal Capability: Engineered to pump liquids safely across a wide temperature spectrum from -15 °C to +110 °C for hot and cold water loops.
- Weatherproof Motor Enclosure: Protected to IP54 ingress standards with fan-cooled aluminium housing to shield internal windings against plant-room dust and splashes.
- Service-Ready Valving: Equipped with full-bore isolation ball valves and a spring-loaded non-return valve so maintenance can proceed without draining the main riser.
- Expansion Vessel Provision: Includes an integrated manifold port ready to couple with a high-capacity diaphragm tank for hydraulic shock absorption.
- Turnkey Skid Construction: Supplied pre-wired, plumbed, and factory pressure-tested on a rigid baseplate to minimise on-site commissioning labour.
- Commercial Backing: Supported by a comprehensive 24 Months warranty for dependable long-term peace of mind in demanding commercial applications.
What's Included
- 1 x Calpeda MXH 2005 horizontal multistage pump
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Microprocessor control board with differential pressure switches
- System pressure gauge
- Factory assembled and tested boosting plant
- Supports a 1500 L galvanised diaphragm expansion tank
SPECIFICATIONS
| Max Flow | 400 L/Min |
| Max Head | 81.5 m |
| Power | 5.5 kW / 415v |
| Rated Current | 6.2 Amps |
| Suitable For | Commercial & Residential Water Supply |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15 °C to +110 °C |
| Inlet Size | 50 mm |
| Outlet Size | 40 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What peak hydraulic flow capacity does this single pump pressure booster provide?
Elevating high-capacity water lines, the Calpeda Fixed Speed Booster Set BS1F 1MXH 2005 achieves a peak volumetric flow of 400 L/min (24 m³/h) across large plumbing risers.
Which electrical power mains and automated motor control board regulate this booster set?
Mains electricity requirements for the BS1F 1MXH 2005 specify three phase 400V 50 Hz power to run the 5.5 kW motor via an automated fixed-speed control panel (400V).
Under what maximum static head elevation and line pressure limits does this package operate?
Maximum static pressure boost for the BS1F-1MXH-2005 is rated at 81.5 metres of elevation head, maintaining 10 bar casing integrity across -15°C to +110°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
Wetted parts throughout the BS1F 1 MXH 2005 utilize AISI 304 chromium-nickel stainless steel, mounted on a Zinc-plated Steel S235JR baseplate and fitted with a check valve, isolating valve, and G 2 by G 1 1/2 connections.
What manufacturer warranty protection coverage supports this fixed speed pumping assembly?
Equipment coverage on the 1MXH 2005 (BS1F 1MXH 2005) is backed by Calpeda manufacturer warranty coverage protecting the multistage pump wet end, electric motor, and electronic control console against manufacturing defects from date of invoice.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us