Roll over image to zoom
SKU: BS1F 1MXH 3202*
Calpeda BS1F 1MXH 3202 Three Phase 4kW Fixed Speed Single Pump Multistage Booster System
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Where high-volume water distribution must contend with simultaneous peak draw-offs across sports complexes, hospitals, or agricultural processing plants, dependable pressure boosting becomes essential. The BS1F 1MXH 3202 packaged set pairs a robust Calpeda MXH 3202 horizontal multistage pump with industrial manifold hardware, supporting flow rates up to 833.3 L/Min. When boosting across pressurised circuits, the pump can develop up to 33 m of head.
Pressure stability across the pipework is maintained through differential pressure switches with a microprocessor control board mounted directly on the unit. By sensing pressure drops as demand rises, the control logic commands immediate pump engagement and verifies stable cut-out pressure before returning to standby. Anti-bounce switching intervals protect the starter gear and motor windings from repetitive switching stress during light-load conditions.
Constructed from hygienic stainless steel AISI 304, the suction and discharge manifolds are sized to accommodate substantial flow rates without cavitation or turbulence. Water enters through a 100 mm suction header and exits via an 80 mm delivery manifold equipped with a direct-reading pressure gauge. Full-flow isolation ball valves, a spring check valve, and an external tank union port are integrated directly into the pipework.
Designed for direct integration into a three-phase 415 V plant-room switchboard, the drive motor utilizes a three-phase 400/690 V stator winding compliant with IEC 60034 benchmarks. Running on a 2-pole induction principle at 2900 rpm (50 Hz) with Class F thermal protection, the unit delivers 4 kW (P2) at the shaft while drawing 5.5 A under full hydraulic load.
Key Features
- Twin-Stage Centrifugal Design: Features a 2-stage stainless steel hydraulic assembly built to sustain high volumetric flow rates with minimal efficiency loss.
- Automated Microprocessor Logic: Monitors differential pressure switch inputs continuously to deliver crisp cut-in response and cushioned shut-off control.
- AISI 304 Manifold Fabrication: Resists internal scaling and rust across both headers, maintaining clean water delivery over years of service.
- Wide Thermal Operating Window: Accommodates liquid temperatures from -15 °C to +110 °C for versatile deployment in hot water or glycol loops.
- Sealed Motor Construction: Built to IP54 protection levels so damp plant-room environments and dust do not compromise electrical integrity.
- On-Board Valving Package: Includes heavy-duty isolation ball valves and non-return check protection to streamline maintenance and stop back-siphoning.
- Buffer Vessel Connection: Provides a factory-fitted port on the delivery header for tying in a large diaphragm expansion tank.
- Plug-and-Run Skid Layout: Factory wired, plumbed, and hydrostatically tested prior to dispatch to reduce on-site installation hours.
- Australian Warranty Support: Comes complete with a 24 Months warranty for assured operational reliability.
What's Included
- 1 x Calpeda MXH 3202 horizontal multistage pump
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Microprocessor control board with differential pressure switches
- System pressure gauge
- Factory assembled and tested boosting plant
- Supports a 2000 L galvanised diaphragm expansion tank
SPECIFICATIONS
| Max Flow | 833 L/Min |
| Max Head | 33 m |
| Power | 4 kW / 415v |
| Rated Current | 5.5 Amps |
| Suitable For | Industrial & Commercial Pressure Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15 °C to +110 °C |
| Inlet Size | 100 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Up to what elevation head height can this fixed speed booster elevate clean water?
Capable of lifting water up to 33 metres, the Calpeda Fixed Speed Booster Set BS1F 1MXH 3202 maintains structural containment at 10 bar casing pressure across fluids from -15°C to +110°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
Wetted parts throughout the BS1F 1MXH 3202 utilize AISI 304 chromium-nickel stainless steel, mounted on a Zinc-plated Steel S235JR baseplate and fitted with a check valve, isolating valve, and G 2 1/2 by G 2 connections.
What manufacturer warranty protection coverage supports this fixed speed pumping assembly?
Equipment coverage on the BS1F-1MXH-3202 is backed by Calpeda manufacturer warranty coverage protecting the multistage pump wet end, electric motor, and electronic control console against manufacturing defects from date of invoice.
What peak water discharge rate and maximum flow capacity does this package supply?
Across standard operating cycles, the BS1F 1 MXH 3202 discharges up to 833.3 L/min (50 m³/h) to satisfy fluctuating domestic water demands.
Which electrical power mains and automated motor control board regulate this booster set?
Electrical drive on the 1MXH 3202 (BS1F 1MXH 3202) is provided by a 4 kW three phase 400V motor running at 50 Hz under the supervision of an automated fixed-speed control panel (400V).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us