Roll over image to zoom
SKU: BS1F 1MXHL 805
Calpeda BS1F 1MXHL 805 Three Phase 1.8kW Fixed Speed Single Pump Multistage Booster System
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Engineered for medium-scale commercial properties, the Calpeda BS1F 1MXHL 805 booster package maintains steady hydraulic supply across multi-level water circuits. Built around a single Calpeda MXHL 805 horizontal multistage pump, this factory-tested assembly delivers flows up to 216.7 L/Min. Where vertical lift is required, the multistage hydraulics can develop up to 54 m of head. It serves apartment buildings, boutique hotels, and light industrial sites requiring dependable pressurisation without fluctuating fixture performance during peak draw.
Pressure supervision relies on calibrated differential pressure switches with a microprocessor control board that tracks demand shifts across the distribution line. As downstream taps open and manifold pressure drops to the cut-in threshold, the controller engages the pump smoothly and monitors operation until pressure recovers. Built-in anti-cycling logic and timer delays prevent rapid start-stop chatter, protecting mechanical seals and electrical contactors from premature wear.
Corrosion-resistant stainless steel AISI 304 manifolds form the hydraulic backbone, pairing a 40 mm suction header with a 25 mm discharge line to keep friction losses low. Dedicated isolation ball valves and integrated non-return check valves simplify routine servicing while stopping backflow through the pump casing. A clear system pressure gauge provides immediate visual diagnostics, and a pre-configured port allows direct tie-in to an external diaphragm tank.
Wired to a standard three-phase 415 V facility supply, the drive unit operates with a three-phase 230/400 V motor winding rating designed for continuous industrial duty. Its 2-pole induction motor spins at 2900 rpm (50 Hz) in full compliance with IEC 60034 standards and Class F thermal insulation requirements. Rated at 1.8 kW (P2) of shaft output, the motor draws a nominal 4.8 A under full hydraulic load.
Key Features
- Multistage Stainless Impellers: Precision 5-stage hydraulic end fabricated with AISI 316L stainless steel wet components for superior corrosion resistance.
- Microprocessor Pressure Control: Coordinates differential switch signals with anti-cycling timers to eliminate nuisance tripping and water hammer.
- Hygienic Header Fabrication: Constructed with AISI 304 stainless steel suction and delivery manifolds to preserve potable and hot water quality.
- Wide Thermal Envelope: Engineered to pump liquids reliably across temperatures ranging from -15 °C to +110 °C in heating or chilled loops.
- Weatherproof Motor Housing: Sealed to IP54 standards with fan-cooled aluminium casing and Class F insulation for plant room durability.
- Service-Friendly Valving: Fitted with full-bore isolation ball valves and spring-loaded check valves for rapid maintenance isolation.
- Expansion Vessel Ready: Includes a dedicated manifold takeoff engineered to pair seamlessly with a floor-standing diaphragm accumulator.
- Turnkey Skid Assembly: Delivered fully piped, wired, and hydrostatically tested on a rigid baseplate backed by a 24 Months warranty.
What's Included
- 1 x Calpeda MXHL 805 horizontal multistage pump
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Microprocessor control board with differential pressure switches
- System pressure gauge
- Factory assembled and tested boosting plant
- Supports a 500 L galvanised diaphragm expansion tank
SPECIFICATIONS
| Max Flow | 217 L/Min |
| Max Head | 54 m |
| Power | 1.8 kW / 415v |
| Rated Current | 4.8 Amps |
| Suitable For | Commercial & Residential Water Supply |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15 °C to +110 °C |
| Inlet Size | 40 mm |
| Outlet Size | 25 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What maximum water delivery volume can this horizontal multistage booster transfer?
Discharging up to 216.7 L/min (13 m³/h) under peak demand, the Calpeda Fixed Speed Booster Set BS1F 1MXHL 805 satisfies high-volume distribution networks without flow hesitation.
Which electrical power mains and automated motor control board regulate this booster set?
Propulsion for the BS1F 1MXHL 805 is delivered by a 1.8 kW induction motor operating on three phase 400V 50 Hz utility mains governed by an automated fixed-speed control panel (400V).
Under what maximum static head elevation and line pressure limits does this package operate?
Developing up to 54 metres of maximum elevation head, the BS1F-1MXHL-805 is rated for a maximum pump casing pressure of 10 bar and handles liquid temperatures from -15°C to +110°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
All wetted hydraulic stages of the BS1F 1 MXHL 805 are constructed from AISI 316L chromium-nickel-molybdenum stainless steel, assembled on a Zinc-plated Steel S235JR baseplate with G 1 1/2 inlet and G 1 outlet ports.
What manufacturer warranty protection coverage supports this fixed speed pumping assembly?
Purchasers of the 1MXHL 805 (BS1F 1MXHL 805) receive dedicated Calpeda warranty support safeguarding all multistage wet end components, drive motors, and electronic sequencing consoles from date of invoice.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us