Roll over image to zoom
SKU: BS2V 2MXHL 204-ITT
Calpeda BS2V 2MXHL 204-ITT Three Phase 2 x 0.55kW Variable Speed Twin Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Commercial high-rise towers and multi-floor commercial buildings deploy the Calpeda BS2V 2MXHL 204-ITT twin pump set to balance multi-tier risers. Built with 2 x Calpeda MXHL 204 multistage pump assemblies, the package delivers a maximum volumetric flow rate of 160 L/min to overcome sudden demand spikes across commercial pipework. The hydraulic wet ends produce a maximum shut-off head of 42.5 metres to maintain constant vertical static elevation without line starvation.
Hydraulically configured in a dual-pump parallel staging layout, the package delivers up to 160 L/min. System regulation is controlled by an integrated I-MAT variable speed control system governing both pumps in automated coordination. The pumps dynamically adjust their operating frequency to match instantaneous draw-off rates, eliminating mechanical water hammer and destructive line pressure surges. A factory-plumbed 18 L membrane pressure vessel dampens transient micro-fluctuations, while digital pressure transducers provide real-time line feedback to protect against dry running.
From a structural standpoint, the twin pumps rest side-by-side upon a unified base frame. Hydraulic construction utilizes premium 316L Stainless Steel impellers, stage chambers, and pump casings for superior corrosion resistance and longevity. The 4-stage hydraulic stacks connect into common manifolds featuring a 80 mm suction port and a 65 mm delivery connection. Each individual pump line incorporates dedicated nickel-plated brass shut-off ball valves and non-return check valves mounted on a vibration-dampened S235JR steel baseplate.
Dual high-efficiency induction motors power the twin pump set, operating synchronously at 2900 rpm. Operating with a full-load current rating of 2 x 1.6 Amps, the TEFC motor configuration incorporates IP54 ingress protection and Class F thermal winding insulation. The package is rated for continuous fluid temperatures from -15°C to +110°C and ambient plant room environments up to 40°C. Manufactured to strict European standards, the entire variable-speed booster system is backed by a comprehensive 24 Months manufacturer warranty.
Key Features
- An integrated I-MAT variable speed control system continuously regulates pump operation across both units to maintain smooth, constant line pressure without cycling.
- Synchronized twin pump wet ends effortlessly produce aggregate delivery flows reaching up to 160 L/min.
- A maximum delivery shut-off head of 42.5 metres easily overcomes vertical static lift and friction losses in multi-tier pipework.
- Heavy-duty AISI 316L chromium-nickel-molybdenum stainless steel metallurgy ensures exceptional resistance against aggressive or treated water supplies.
- System line pressure is stabilized by an 18 L membrane vessel paired with electronic pressure transducers for active dry-run protection.
- Integrated AISI 304 stainless steel headers include a 80 mm suction port, 65 mm delivery connection, and non-return check valves on each run.
- High-efficiency commercial electric motors run at 2900 rpm on 400V 50 Hz mains, drawing an absorbed current of 2 x 1.6 Amps.
- Verified operating limits safely tolerate fluid temperatures from -15°C to +110°C in plant room ambient conditions up to 40°C.
- Automated lead-lag duty assist staging seamlessly rotates operating hours across pumps to prevent uneven component wear.
- Factory quality assurance is reinforced by an official 24 Months warranty covering the pump wet ends, motors, and inverter drives.
What's Included
- 2 x Calpeda MXHL 204 horizontal multistage pumps
- 1 x Integrated I-MAT variable speed control system with dual-pump inverter regulation
- 1 x Common AISI 304 stainless steel suction manifold with isolation valves (80 mm)
- 1 x Common AISI 304 stainless steel discharge manifold with check valves (65 mm)
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery header
- 2 x Digital electronic pressure transducers with M12 connection cabling
- 1 x Heavy-duty zinc-plated structural steel mounting baseplate (S235JR)
- 1 x Comprehensive installation manual and manufacturer documentation pack
SPECIFICATIONS
| Max Flow | 160 L/Min |
| Max Head | 42.5 m |
| Power | 2 x 0.55 kW / 415v |
| Rated Current | 2 x 1.6 Amps |
| Suitable For | High-Rise Building Water Boosting |
| Body Material | 316L Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 80 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What supply voltage and synchronized inverter controls manage both pump motors?
Variable frequency control on the Calpeda BS2V 2MXHL 204-ITT Variable Speed Booster Set with I-MAT (3~ (400V)) (BS2V 2MXHL 204-ITT) utilizes Three Phase 400 V power at 50 Hz to drive twin 0.55 kW (0.8 HP) motors totaling 1.1 kW, coordinated by dual communicating Calpeda I-MAT inverters.
Under what maximum static head elevation and line pressure limits does this package operate?
The BS2V 2MXHL 204-ITT generates up to 42.5 metres of maximum static head and sustains casing pressures up to 10 bar, rated for liquid temperatures between -15 °C to +110 °C.
What corrosion proof wetted metallurgy and manifold connection port sizes are incorporated?
Common manifold plumbing on the BS2V-2MXHL-204-ITT provides G 2" BSP suction and G 1 1/2" BSP delivery connections, joining AISI 316L chromium-nickel-molybdenum stainless steel pumps on a Zinc-plated Steel S235JR Baseplate.
What manufacturer warranty protection coverage supports this variable speed pumping assembly?
The BS2V 2 MXHL 204-ITT is backed by Calpeda manufacturer warranty coverage protecting the multistage pump wet end, electric motor, and electronic inverter console against manufacturing defects from date of invoice.
What peak water discharge rate and maximum flow capacity does this package supply?
Operating in parallel duty assist mode, the BS2V (BS2V 2MXHL 204-ITT) provides up to 160 L/min (9.6 m³/h), where each multistage pump supplies up to 80 L/min (4.8 m³/h).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us