Roll over image to zoom
SKU: BS2V 2MXV 50-2014-ITT
Calpeda BS2V 2MXV 50-2014-ITT 2 x 15kW Variable Speed Twin Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Consistent water delivery throughout commercial building infrastructure prevents pressure loss during concurrent usage peaks. Built with 2 Calpeda MXV 50-2014 vertical multistage pumps configured in parallel, this variable-speed twin package ensures continuous pressure stability. At peak consumption, the dual-pump configuration produces a peak volumetric flow rate of 933 L/Min to sustain commercial operations. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 201 m to overcome static building elevation.
Precise setpoint pressure is sustained across fluctuating facility draw through an integrated motor-mounted Calpeda I-MAT variable frequency converter. An electronic pressure transducer continuously feeds line data to the integrated controller, modulating pump speed to deliver exact flow requirements without pressure spikes. Smooth soft-start and soft-stop ramp profiles protect building distribution pipework from mechanical water hammer and sudden pressure waves. Built-in electronic monitoring systems deliver automatic safety shutdown protection in the event of dry-run conditions, electrical phase imbalance, or motor overload.
Built with high-grade AISI 304 stainless steel metallurgy, the internal impellers, stage chambers, outer sleeves, and pump bodies provide exceptional operational durability. Hydraulic flow distributes through common AISI 304 stainless steel manifolds with standardized 80 mm suction and 80 mm delivery fittings with G 3" BSP / DN 80 flanged. Independent isolation valves and check valves service each pump run, mounted alongside an analog delivery pressure gauge upon an AISI 304 stainless steel baseplate frame.
Synchronous mechanical output is supplied by two 2-pole commercial induction motors matched to Australian three-phase 400 V (50 Hz) power standards. Rotating at a nominal operating speed of 2900 rpm, the twin motor assembly delivers 2 x 15 kW of total drive power while drawing a rated full-load current of 2 x 27.5 Amps. High-efficiency motor design maintains balanced electrical consumption and robust mechanical performance across varying commercial pressure demands.
Key Features
- Synchronized dual vertical multistage 14-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
- An integrated motor-mounted Calpeda I-MAT variable frequency converter continuously modulates operating speed to sustain exact setpoint pressure.
- Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers ensure superior corrosion resistance.
- Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
- Verified operating limits safely circulate clean commercial liquids across a working temperature spectrum of -15 °C to +110 °C.
- Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
- Integrated digital safety electronics provide automated shutdown protection against dry-running, motor overcurrent, and electrical supply faults.
- Standardized G 3" BSP / DN 80 flanged manifold connections simplify mechanical alignment and expedite site pipework installation.
- Automated duty assist rotation equalizes operating run hours across both pumps to prevent uneven component wear.
- Supported by an official 24-month manufacturer warranty.
What's Included
- 2 x Calpeda MXV 50-2014 vertical multistage pumps
- 1 x Motor-mounted Calpeda I-MAT variable frequency converter with motor adapter and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty AISI 304 stainless steel structural mounting baseplate
SPECIFICATIONS
| Max Flow | 933 L/Min |
| Max Head | 201 m |
| Power | 2 x 15 kW / 415v |
| Rated Current | 2 x 27.5 Amps |
| Suitable For | Building Services Pressure Systems |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 80 mm |
| Outlet Size | 80 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What total elevation boost and casing pressure ratings does this twin package provide?
Casing pressure thresholds on the Calpeda BS2V 2MXV 50-2014-ITT Variable Speed Booster Set with I-MAT Three Phase reach a maximum elevation head of 201 metres with a maximum casing pressure of 25 bar, handling clean fluids at temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Constructed with AISI 304 chromium-nickel stainless steel and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS2V 2MXV 50-2014-ITT incorporates Hard Metal-Carbon-EPDM mechanical seals alongside G 3" BSP suction and G 3" BSP delivery common manifolds.
What manufacturer warranty protection coverage supports this twin variable speed pumping assembly?
Equipment protection on the BS2V 2MXV 50-2014-ITT is covered by an official 24-month manufacturer warranty.
What peak water discharge rate and maximum parallel flow capacity does this package supply?
Rated for maximum volumetric throughput, the BS2V 2 MXV 50 2014 ITT yields up to 933.4 L/min (56 m³/h) with dual pumps active, each delivering up to 466.7 L/min (28 m³/h) to maintain line pressure.
Which electrical power supply and variable speed frequency converter regulate this booster set?
Mains supply requirements for the 2MXV 50-2014-ITT specify Three Phase 400 V at 50 Hz to run twin 15 kW (20 HP) motors totaling 30 kW under integrated Calpeda I-MAT inverter control.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us