Roll over image to zoom
SKU: BS2V 2MXV 80-4806-ITT
Calpeda BS2V 2MXV 80-4806-ITT 2 x 15kW Variable Speed Twin Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Multi-level commercial infrastructure requires robust hydraulic boosting to eliminate pressure drops during simultaneous draw periods. Configured with 2 Calpeda MXV 80-4806 vertical multistage pumps in a coordinated parallel layout, this twin system maintains uniform pressure across elevated risers. When working against closed delivery valves, the hydraulic assemblies generate a maximum static closed-valve head of 108 m for vertical elevation. Under peak concurrent fixture demand, the synchronized twin wet ends provide a maximum delivery capacity of 2000 L/Min across the network.
System line pressure is dynamically stabilized by an integrated motor-mounted Calpeda I-MAT frequency converter working in synchronized twin-pump orchestration. A high-precision digital transducer measures header pressure continuously, allowing the inverter to vary impeller velocity in direct response to consumer draw. Engineered acceleration ramps eliminate hydraulic water hammer, reducing physical stress on pipe joints, valves, and building plumbing infrastructure. The onboard control architecture includes comprehensive digital fault detection, automatically stopping the pumps during dry-run, power supply, or thermal overload events.
High mechanical endurance is achieved through Cast Iron GJL 250 pump casings encasing AISI 304 stainless steel intermediate stages, impellers, and drive shafts. The dual commercial pumps connect into heavy-duty headers providing standardized 125 mm suction and 125 mm discharge manifolds with DN 125 flanged. Dedicated isolation ball valves and inline non-return check valves protect each line, supported on an AISI 304 stainless steel structural mounting skid.
Electric propulsion is delivered via two 2-pole asynchronous induction motors built strictly for standard Australian commercial three-phase 400 V (50 Hz) power supplies. Operating at 2900 rpm, the dual motor assembly provides 2 x 15 kW of mechanical shaft energy and absorbs a rated full-load current of 2 x 27.5 Amps. Heavy-duty stator windings with Class F thermal insulation ensure dependable mechanical longevity under continuous plant room commercial operation.
Key Features
- Synchronized dual vertical multistage 6-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
- An integrated motor-mounted Calpeda I-MAT variable frequency converter continuously modulates operating speed to sustain exact setpoint pressure.
- Heavy-duty Cast Iron pump casings paired with AISI 304 stainless steel stage chambers and impellers deliver exceptional structural rigidity.
- Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
- Verified operating limits safely circulate clean commercial liquids across a working temperature spectrum of -15 °C to +110 °C.
- Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
- Integrated digital safety electronics provide automated shutdown protection against dry-running, motor overcurrent, and electrical supply faults.
- Standardized DN 125 flanged manifold connections simplify mechanical alignment and expedite site pipework installation.
- Automated duty assist rotation equalizes operating run hours across both pumps to prevent uneven component wear.
- Covered by a 24-month manufacturer warranty.
What's Included
- 2 x Calpeda MXV 80-4806 vertical multistage pumps
- 1 x Motor-mounted Calpeda I-MAT variable frequency converter with motor adapter and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty AISI 304 stainless steel structural mounting baseplate
SPECIFICATIONS
| Max Flow | 2000 L/Min |
| Max Head | 108 m |
| Power | 2 x 15 kW / 415v |
| Rated Current | 2 x 27.5 Amps |
| Suitable For | Large Multi-Storey Water Supply |
| Body Material | Cast Iron |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 125 mm |
| Outlet Size | 125 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which electrical characteristics and mounted inverter govern this twin booster unit?
Mains power regulation on the Calpeda BS2V 2MXV 80-4806-ITT Variable Speed Booster Set with I-MAT Three Phase utilizes Three Phase 400 V power at 50 Hz to drive twin 15 kW (20 HP) motors totaling 30 kW, coordinated by an integrated Calpeda I-MAT variable frequency converter.
Under what maximum static head elevation and line pressure limits does this package operate?
Developing up to 108 metres of maximum static head, the BS2V 2MXV 80-4806-ITT sustains internal casing pressures up to 25 bar across fluid operating temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Wetted construction on the BS2V-2MXV-80-4806-ITT combines Cast iron GJL 250 pump casings, AISI 304 stage casings, and AISI 304 stainless steel impellers seated on a Zinc-plated Steel S235JR Baseplate, linked by DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this twin variable speed pumping assembly?
The BS2V 2MXV 80-4806-ITT variable speed booster set is protected by a 24-month manufacturer warranty.
What peak water discharge rate and maximum parallel flow capacity does this package supply?
To accommodate heavy site consumption, the 2MXV 80-4806-ITT provides up to 2000 L/min (120 m³/h) across twin pumps under automated variable speed coordination.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us