Roll over image to zoom
SKU: BS3V 3MXV 25-305-ITT
Calpeda BS3V 3MXV 25-305-ITT 3 x 0.75kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Multi-level commercial infrastructure requires robust hydraulic boosting to eliminate pressure drops during simultaneous draw. Configured with 3 Calpeda MXV 25-305 vertical multistage pumps in parallel, the Calpeda BS3V 3MXV 25-305-ITT booster maintains uniform pressure across multi-unit residential apartment towers and central pressure mains. When working against closed delivery valves, the hydraulic assemblies generate a maximum static closed-valve head of 53 m for elevation. Under peak concurrent fixture demand, the synchronized triple wet ends provide a maximum delivery capacity of 225 L/Min across the network.
Automated pressure regulation is governed by a motor-mounted Calpeda I-MAT variable frequency converter operating the three pumps in coordinated duty-assist staging. Stepless speed modulation continuously matches rotational velocity to instantaneous line demand, maintaining constant pressure while maximizing electrical efficiency. Gradual acceleration ramps eliminate disruptive hydraulic surges, protecting building pipework and inline fittings from mechanical water hammer stresses. Comprehensive digital diagnostics incorporate automated shut-off protection to safeguard the pumping assembly against dry running, phase loss, and overcurrent conditions.
Manufactured with AISI 304 stainless steel wet ends, the vertical multistage pumps include stainless steel casings, intermediate diffuser stages, impellers, and wear sleeves. Three vertical pumps couple directly to rigid AISI 304 stainless steel headers with 50 mm suction and 50 mm discharge ports equipped with G 2" BSP threaded fittings. Individual isolation ball valves and non-return check valves protect each branch, supported by an analog line pressure gauge on an AISI 304 stainless steel mounting base.
Power is provided by three heavy-duty 2-pole induction motors designed for continuous operation on Australian three-phase 400 V (50 Hz) electrical distribution networks. Running synchronously at 2900 rpm, the electric drives generate 3 x 0.75 kW of mechanical output with a rated operational full-load current draw of 3 x 1.9 Amps. High-grade electrical laminations and Class F thermal insulation deliver long-term mechanical reliability across continuous commercial duty cycles.
Key Features
- Three Calpeda MXV 25-305 vertical multistage 5-stage pumps configured on shared manifolds supply high-efficiency constant-pressure boosting.
- Continuous setpoint pressure is governed by an integrated motor-mounted Calpeda I-MAT variable frequency inverter.
- Complete AISI 304 stainless steel hydraulic construction covering pump housings, diffuser stages, and impellers ensures lasting fluid purity.
- Heavy-duty electric motors are rated to IP55 ingress standards with Class F thermal insulation for continuous commercial duty.
- Verified operating limits safely circulate clean commercial liquids across a working temperature spectrum of -15 °C to +110 °C.
- Gradual soft-start and soft-stop acceleration ramps isolate distribution pipework from hydraulic water hammer shock.
- Built-in digital diagnostic monitoring delivers automatic safety cut-out protection in the event of dry-run or phase supply faults.
- Standardized G 2" BSP threaded fittings suction and discharge headers ensure straightforward plumbing integration into commercial risers.
- Integrated duty-assist sequencing evenly distributes operational hours across the three pump units to prevent uneven service wear.
- Covered by an official 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 25-305 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 225 L/Min |
| Max Head | 53 m |
| Power | 3 x 0.75 kW / 415v |
| Rated Current | 3 x 1.9 Amps |
| Suitable For | Commercial Building Water Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Motor speed regulation on the Calpeda BS3V 3MXV 25-305-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) utilizes Three Phase 400 V power at 50 Hz to drive three 0.75 kW (1 HP) motors totaling 2.25 kW, coordinated by three communicating Calpeda I-MAT inverters.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Developing up to 53 metres of maximum static head, the BS3V 3MXV 25-305-ITT sustains internal casing pressures up to 25 bar across fluid operating temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Wetted construction on the BS3V-3MXV-25-305-ITT combines AISI 304 chromium-nickel stainless steel pump casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, linked by G 2" BSP suction and G 2" BSP delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Warranty protection supporting the BS3V 3 MXV 25 305 ITT encompasses full Calpeda coverage for the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
To accommodate heavy site consumption, the 3MXV 25-305-ITT provides up to 225 L/min (13.5 m³/h) across three pumps under automated variable speed coordination, with each unit rated to 75 L/min (4.5 m³/h).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










