Roll over image to zoom
SKU: BS3V 3MXV 25-318-ITT
Calpeda BS3V 3MXV 25-318-ITT 3 x 3kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
High-occupancy commercial premises demand continuous water pressure across multi-level pipe networks. Powered by 3 Calpeda MXV 25-318 vertical multistage pumps arranged in parallel, the Calpeda BS3V 3MXV 25-318-ITT system provides balanced water flow across corporate commercial parks and centralized potable water booster circuits. At full facility draw, the triplex pumping set provides a maximum delivery capacity of 225 L/Min to maintain fixture performance. Under static closed-line conditions, the vertical multistage design develops a maximum shut-off head of 191 m to overcome static delivery lift.
Consistent delivery pressure across fluctuating building demand is sustained by a motor-mounted Calpeda I-MAT variable frequency converter. The drive processes real-time transducer signals from the discharge header, adjusting pump operating speeds smoothly to satisfy instant consumption. Programmed ramp profiles prevent pipework water hammer, preserving the mechanical integrity of connected fittings, valves, and distribution lines. Automated digital safety safeguards ensure reliable shut-off protection if dry-running, phase supply faults, or motor overloads are detected.
Hydraulic wet ends are manufactured from AISI 304 stainless steel, encompassing pump casings, stage bowls, impellers, and drive shafts for high chemical resistance. The triplex pump array connects into common AISI 304 stainless steel manifolds featuring 50 mm suction and 50 mm delivery fittings with G 2" BSP threaded fittings. Individual isolation ball valves and check valves isolate each pump branch, supported by an analog line gauge on an AISI 304 mounting base.
Pumping drive is provided by three commercial 2-pole induction electric motors engineered strictly for Australian three-phase 400 V (50 Hz) power infrastructure. Rotating at a nominal speed of 2900 rpm, the three motors provide 3 x 3 kW of total output with a rated full-load current draw of 3 x 6.2 Amps. High-grade copper stator windings and Class F insulation ensure dependable mechanical operation under continuous plant room conditions.
Key Features
- Three Calpeda MXV 25-318 vertical multistage 18-stage pumps configured on shared manifolds supply high-efficiency constant-pressure boosting.
- Continuous setpoint pressure is governed by an integrated motor-mounted Calpeda I-MAT variable frequency inverter.
- Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers ensure superior corrosion resistance.
- Heavy-duty electric motors are rated to IP55 ingress standards with Class F thermal insulation for continuous commercial duty.
- Verified operating limits safely circulate clean commercial liquids across a working temperature spectrum of -15 °C to +110 °C.
- Gradual soft-start and soft-stop acceleration ramps isolate distribution pipework from hydraulic water hammer shock.
- Built-in digital diagnostic monitoring delivers automatic safety cut-out protection in the event of dry-run or phase supply faults.
- Standardized G 2" BSP threaded fittings suction and discharge headers ensure straightforward plumbing integration into commercial risers.
- Integrated duty-assist sequencing evenly distributes operational hours across the three pump units to prevent uneven service wear.
- Protected by a 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 25-318 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 225 L/Min |
| Max Head | 191 m |
| Power | 3 x 3 kW / 415v |
| Rated Current | 3 x 6.2 Amps |
| Suitable For | Commercial Cold Water Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How does Calpeda factory warranty backing cover the pumps, motors, and inverters?
Official warranty protection for the Calpeda BS3V 3MXV 25-318-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) provides full Calpeda factory protection covering the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Under peak distribution demand, the BS3V 3MXV 25-318-ITT supplies up to 225 L/min (13.5 m³/h) across three pumps, where each vertical multistage pump provides up to 75 L/min (4.5 m³/h).
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Electrical propulsion for the BS3V-3MXV-25-318-ITT draws Three Phase 400 V power at 50 Hz, energizing three 3 kW (4 HP) electric motors totaling 9 kW modulated by three communicating Calpeda I-MAT drives.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Within elevated discharge circuits, the BS3V 3 MXV 25 318 ITT generates up to 191 metres of head and accommodates casing pressures up to 25 bar across liquid temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Physical metallurgy across the 3MXV 25-318-ITT encompasses AISI 304 chromium-nickel stainless steel pump casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals on a Zinc-plated Steel S235JR Baseplate, with G 2" BSP suction and G 2" BSP delivery common manifolds.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










