Calpeda BS3V 3MXV 32-505-ITT 3 x 1.1kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 32-505-ITT

Calpeda BS3V 3MXV 32-505-ITT 3 x 1.1kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$29,861.92 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
400 L/Min
Max Head
51.5 m
Power
3 x 1.1 kW / 415v
Ideal Use
Light Industrial Water Boosting

Product Overview

Commercial facilities rely on continuous line pressure to support multi-point fixture demand. This variable-speed triplex package integrates 3 Calpeda MXV 32-505 vertical multistage pumps in parallel across high-rise residential developments and vertical sanitary pipework. During peak facility draw, the set delivers a peak volumetric flow rate of 400 L/Min to supply all fixtures concurrently. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 51.5 m for static building elevation.

Precise setpoint pressure is sustained across fluctuating facility draw through an integrated motor-mounted Calpeda I-MAT variable frequency converter. An electronic pressure transducer continuously feeds line data to the integrated controller, modulating pump speed to deliver exact flow requirements without pressure spikes. Smooth soft-start and soft-stop ramp profiles protect building distribution pipework from mechanical water hammer and sudden pressure waves. Built-in electronic monitoring systems deliver automatic safety shutdown protection in the event of dry-run conditions, electrical phase imbalance, or motor overload.

Corrosion-resistant AISI 304 stainless steel metallurgy extends across the entire hydraulic assembly, including stage chambers, precision impellers, casings, and pump shafts. Hydraulic flow distributes through common AISI 304 stainless steel manifolds with standardized 65 mm suction and 65 mm delivery fittings with G 2 1/2" BSP threaded fittings. Independent isolation valves and check valves service each pump run, mounted alongside an analog delivery pressure gauge upon an AISI 304 stainless steel baseplate frame.

Synchronous mechanical output is supplied by three 2-pole commercial induction motors matched to Australian three-phase 400 V (50 Hz) power standards. Rotating at a nominal operating speed of 2900 rpm, the three-motor assembly delivers 3 x 1.1 kW of total drive power while drawing a rated full-load current of 3 x 2.6 Amps. High-efficiency motor design maintains balanced electrical consumption and robust mechanical performance across varying commercial pressure demands.

Key Features

  • Synchronized triple vertical multistage 5-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
  • An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
  • Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers ensure superior corrosion resistance.
  • Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
  • Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
  • Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
  • Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
  • Standardized G 2 1/2" BSP threaded manifold connections simplify mechanical alignment and expedite site pipework installation.
  • Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
  • Backed by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 32-505 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow400 L/Min
Max Head51.5 m
Power3 x 1.1 kW / 415v
Rated Current3 x 2.6 Amps
Suitable ForLight Industrial Water Boosting
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size65 mm
Outlet Size65 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Energy-efficient pressure maintenance across multi-level commercial developments is delivered by the Calpeda BS3V 3MXV 32-505-ITT 3 x 1.1kW Variable Speed Triple Pump Booster Set with I-MAT Converter. An integrated Calpeda I-MAT variable frequency drive continuously modulates motor output, soft-starting motors to prevent line hammer while delivering a maximum flow capacity of 400 L/Min and reaching a maximum shut-off head of 51.5 m. The skid arrives fully assembled on a structural chassis with dual 65 mm manifold connections, dedicated non-return valves, and an expansion vessel.

  • Multi-Unit Residential Water Supply
  • Commercial Building Services Boosting
  • Potable Mains Pressure Maintenance
  • Central Plant Room Booster Sets

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
To what vertical elevation in metres can this triple multistage unit deliver water?

Discharge pressure capability on the Calpeda BS3V 3MXV 32-505-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) attains a maximum elevation head of 51.5 metres with a maximum casing pressure of 25 bar, moving clean fluids at temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Constructed with AISI 304 chromium-nickel stainless steel pump casings and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3MXV 32-505-ITT incorporates Hard Metal-Carbon-EPDM mechanical seals alongside G 2 1/2" BSP suction and G 2 1/2" BSP delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Factory warranty provisions for the BS3V-3MXV-32-505-ITT cover the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Rated for maximum volumetric throughput, the BS3V 3 MXV 32 505 ITT yields up to 400 L/min (24 m³/h) with all three pumps active, each supplying up to 133.3 L/min (8 m³/h) to maintain line pressure.

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Mains supply requirements for the 3MXV 32-505-ITT specify Three Phase 400 V at 50 Hz to run three 1.1 kW (1.5 HP) motors totaling 3.3 kW under triple communicating I-MAT inverter control.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed