Calpeda BS3V 3MXV 32-507-ITT 3 x 1.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 32-507-ITT

Calpeda BS3V 3MXV 32-507-ITT 3 x 1.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$30,799.28 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
400 L/Min
Max Head
72.5 m
Power
3 x 1.5 kW / 415v
Ideal Use
Constant Pressure Water Boosting

Product Overview

Maintaining uniform delivery pressure across extensive developments demands balanced hydraulic support. Built with 3 Calpeda MXV 32-507 vertical multistage pumps in parallel, this variable-speed triplex package ensures continuous stability for commercial plant rooms and high-volume water distribution mains. At peak consumption, the three-pump configuration produces a peak volumetric flow rate of 400 L/Min to sustain commercial operations. Under closed-valve conditions, the vertical multistage stacks develop a maximum shut-off head of 72.5 m to overcome building height.

Constant hydraulic delivery is achieved using a motor-mounted Calpeda I-MAT variable speed controller programmed for automated multi-pump management. The frequency converter adjusts motor rotational speed continuously to maintain target manifold pressure regardless of sudden fixture activations. Controlled deceleration and soft-starting profiles isolate the piping distribution network from shock loading and damaging hydraulic hammer effects. Embedded electronic safety protocols actively protect the package against low-suction dry operation, electrical supply phase faults, and excessive motor current.

Superior fluid purity and corrosion resistance are ensured through complete AISI 304 stainless steel hydraulic construction covering the pump bodies, stages, and impellers. Common stainless steel manifolds align the three pumps with standardized 65 mm suction and 65 mm discharge connections with G 2 1/2" BSP threaded fittings. Each hydraulic branch incorporates nickel-plated isolation valves and non-return valves, complemented by a delivery pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate.

The pumping package is driven by three commercial-grade 2-pole induction electric motors engineered for three-phase 400 V (50 Hz) electrical mains in Australia. All three motors rotate synchronously at 2900 rpm, generating 3 x 1.5 kW of mechanical power with a combined rated full-load current draw of 3 x 3.4 Amps. Precision copper windings and Class F insulation provide exceptional thermal dissipation during continuous high-demand pumping duty.

Key Features

  • Parallel triplex arrangement of three Calpeda MXV 32-507 7-stage vertical multistage pumps ensures dependable hydraulic delivery.
  • Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
  • Corrosion-resistant AISI 304 stainless steel wet ends provide long-term hydraulic durability and chemical immunity in clean water service.
  • Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
  • Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
  • Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
  • Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
  • Pre-assembled G 2" BSP threaded fittings distribution manifolds allow direct, streamlined site pipework connection.
  • Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
  • Supported by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 32-507 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow400 L/Min
Max Head72.5 m
Power3 x 1.5 kW / 415v
Rated Current3 x 3.4 Amps
Suitable ForConstant Pressure Water Boosting
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size65 mm
Outlet Size65 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Operating with a maximum shut-off head of 72.5 m and a peak flow capacity of 400 L/Min, the Calpeda BS3V 3MXV 32-507-ITT 3 x 1.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter eliminates pressure loss across central plant room cold water distribution systems. Integrated Calpeda I-MAT variable speed drives regulate pump speed in real time to match building draw, keeping line pressure constant throughout peak operating hours. Pre-plumbed dual 65 mm manifolds, non-return check valves, and an integrated pressure accumulator arrive fully mounted on a rigid baseplate for rapid installation.

  • Commercial Complex Water Pressure Boosting
  • Multi-Storey Cold Water Supply
  • Plant Room Variable Speed Systems
  • Potable Water Header Pressurisation

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
What warranty protection applies to the three multistage pump ends and electronic drives?

Manufacturer warranty backing for the Calpeda BS3V 3MXV 32-507-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) provides full Calpeda factory protection covering the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Under peak distribution demand, the BS3V 3MXV 32-507-ITT supplies up to 400 L/min (24 m³/h) across three pumps, where each vertical multistage pump provides up to 133.3 L/min (8 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Electrical propulsion for the BS3V-3MXV-32-507-ITT draws Three Phase 400 V power at 50 Hz, energizing three 1.5 kW (2 HP) electric motors totaling 4.5 kW modulated by three communicating Calpeda I-MAT drives.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Within elevated discharge circuits, the BS3V 3 MXV 32 507 ITT generates up to 72.5 metres of head and accommodates casing pressures up to 25 bar across liquid temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Physical metallurgy across the 3MXV 32-507-ITT encompasses AISI 304 chromium-nickel stainless steel pump casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals on a Zinc-plated Steel S235JR Baseplate, with G 2 1/2" BSP suction and G 2 1/2" BSP delivery common manifolds.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed