Calpeda BS3V 3MXV 32-518-ITT 3 x 4kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 32-518-ITT

Calpeda BS3V 3MXV 32-518-ITT 3 x 4kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$36,739.06 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
400 L/Min
Max Head
187 m
Power
3 x 4 kW / 415v
Ideal Use
Multi-Storey Building Water Supply

Product Overview

Balancing pressure across commercial risers requires steady performance and rapid response to flow changes. This triplex booster installation couples 3 Calpeda MXV 32-518 vertical multistage pumps on common headers to supply dependable pressure for suburban apartment developments and centralized water boosting loops. Operating against closed delivery isolation valves, the multistage pump stacks develop a maximum shut-off head of 187 m for vertical elevation. During maximum concurrent consumption, the three-pump array delivers a peak volumetric flow rate of 400 L/Min across the distribution line.

Continuous line pressure stability is maintained by an integrated motor-mounted Calpeda I-MAT frequency converter programmed for automated triplex duty-assist staging. The variable speed drive tracks line pressure via a digital pressure transducer and modulates operating speed in real time to match consumer draw-off. Controlled acceleration and deceleration ramp profiles prevent hydraulic shock, substantially eliminating pipework water hammer and extending system service life. Integrated electronic safety functions provide automatic shutdown protection against dry-running, motor overcurrent, and phase supply faults.

Hydraulic construction utilizes premium AISI 304 stainless steel across the pump casings, intermediate stage chambers, impellers, and drive shafts for superior corrosion resistance. The three pumping units connect into common AISI 304 stainless steel manifolds featuring matching 65 mm suction and 65 mm delivery connections with G 2 1/2" BSP threaded fittings. Each pump line incorporates dedicated isolation ball valves and non-return check valves, alongside a delivery visual pressure gauge and heavy-duty zinc-plated steel (S235JR) structural baseplate.

Mechanical drive is delivered by three high-efficiency 2-pole induction electric motors engineered specifically for Australian three-phase 400 V (50 Hz) commercial electrical supplies. Operating smoothly at a rated speed of 2900 rpm, the three electric motors produce 3 x 4 kW of shaft power and draw a rated full-load current of 3 x 8.1 Amps. Precision motor engineering and Class F winding insulation ensure continuous thermal endurance and reliable energy conversion across demanding commercial operational cycles.

Key Features

  • Synchronized triple vertical multistage 18-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
  • An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
  • Corrosion-resistant AISI 304 stainless steel wet ends provide long-term hydraulic durability and chemical immunity in clean water service.
  • Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
  • Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
  • Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
  • Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
  • Standardized G 2 1/2" BSP threaded manifold connections simplify mechanical alignment and expedite site pipework installation.
  • Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
  • Supported by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 32-518 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow400 L/Min
Max Head187 m
Power3 x 4 kW / 415v
Rated Current3 x 8.1 Amps
Suitable ForMulti-Storey Building Water Supply
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size65 mm
Outlet Size65 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Energy-efficient pressure maintenance across multi-storey residential apartment buildings is delivered by the Calpeda BS3V 3MXV 32-518-ITT 3 x 4kW Variable Speed Triple Pump Booster Set with I-MAT Converter. An integrated Calpeda I-MAT variable frequency drive continuously modulates motor output, soft-starting motors to prevent line hammer while delivering a maximum flow capacity of 400 L/Min and reaching a maximum shut-off head of 187 m. The skid arrives fully assembled on a structural chassis with dual 65 mm manifold connections, dedicated non-return valves, and an expansion vessel.

  • Multi-Unit Residential Water Supply
  • Commercial Building Services Boosting
  • Potable Mains Pressure Maintenance
  • Central Plant Room Booster Sets

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
How much water throughput in litres per minute can this triple pumping system yield?

Combined water delivery on the Calpeda BS3V 3MXV 32-518-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) delivers up to 400 L/min (24 m³/h) across three pumps in parallel duty assist mode, with each vertical multistage pump supplying up to 133.3 L/min (8 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Powered by Three Phase 400 V mains at 50 Hz, the BS3V 3MXV 32-518-ITT drives three 4 kW (5.5 HP) motors totaling 12 kW governed by three communicating Calpeda I-MAT variable speed converters.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Maximum static elevation on the BS3V-3MXV-32-518-ITT achieves up to 187 metres while withstanding casing pressures up to 25 bar, rated for liquid temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Built with AISI 304 chromium-nickel stainless steel pump casings and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3 MXV 32 518 ITT includes Hard Metal-Carbon-EPDM mechanical seals with G 2 1/2" BSP suction and G 2 1/2" BSP delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Equipment protection on the 3MXV 32-518-ITT is backed by Calpeda manufacturer warranty terms guarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed