Calpeda BS3V 3MXV 40-917-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 40-917-ITT

Calpeda BS3V 3MXV 40-917-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$47,060.53 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
650 L/Min
Max Head
184 m
Power
3 x 7.5 kW / 415v
Ideal Use
Commercial Water Reticulation Systems

Product Overview

Consistent water delivery throughout commercial infrastructure prevents pressure loss during concurrent usage peaks. Engineered with 3 Calpeda MXV 40-917 vertical multistage pumps in parallel, this variable-speed triplex package ensures pressure stability throughout high-density urban apartment buildings and multi-zone distribution mains. At peak consumption, the three-pump configuration produces a peak volumetric flow rate of 650 L/Min to sustain commercial operations. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 184 m for static elevation.

Continuous line pressure stability is maintained by an integrated motor-mounted Calpeda I-MAT frequency converter programmed for automated triplex duty-assist staging. The variable speed drive tracks line pressure via a digital pressure transducer and modulates operating speed in real time to match consumer draw-off. Controlled acceleration and deceleration ramp profiles prevent hydraulic shock, substantially eliminating pipework water hammer and extending system service life. Integrated electronic safety functions provide automatic shutdown protection against dry-running, motor overcurrent, and phase supply faults.

Hydraulic construction utilizes premium AISI 304 stainless steel across the pump casings, intermediate stage chambers, impellers, and drive shafts for superior corrosion resistance. The three pumping units connect into common AISI 304 stainless steel manifolds featuring matching 80 mm suction and 80 mm delivery connections with G 3" BSP threaded fittings. Each pump line incorporates dedicated isolation ball valves and non-return check valves, alongside a delivery visual pressure gauge and heavy-duty zinc-plated steel (S235JR) structural baseplate.

Mechanical drive is delivered by three high-efficiency 2-pole induction electric motors engineered specifically for Australian three-phase 400 V (50 Hz) commercial electrical supplies. Operating smoothly at a rated speed of 2900 rpm, the three electric motors produce 3 x 7.5 kW of shaft power and draw a rated full-load current of 3 x 14.3 Amps. Precision motor engineering and Class F winding insulation ensure continuous thermal endurance and reliable energy conversion across demanding commercial operational cycles.

Key Features

  • Parallel triplex arrangement of three Calpeda MXV 40-917 17-stage vertical multistage pumps ensures dependable hydraulic delivery.
  • Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
  • Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers ensure superior corrosion resistance.
  • Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
  • Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
  • Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
  • Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
  • Pre-assembled G 2 1/2" BSP threaded fittings distribution manifolds allow direct, streamlined site pipework connection.
  • Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
  • Backed by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 40-917 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow650 L/Min
Max Head184 m
Power3 x 7.5 kW / 415v
Rated Current3 x 14.3 Amps
Suitable ForCommercial Water Reticulation Systems
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size80 mm
Outlet Size80 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Operating with a maximum shut-off head of 184 m and a peak flow capacity of 650 L/Min, the Calpeda BS3V 3MXV 40-917-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter eliminates pressure loss across multi-storey residential apartment buildings. Integrated Calpeda I-MAT variable speed drives regulate pump speed in real time to match building draw, keeping line pressure constant throughout peak operating hours. Pre-plumbed dual 80 mm manifolds, non-return check valves, and an integrated pressure accumulator arrive fully mounted on a rigid baseplate for rapid installation.

  • Commercial Complex Water Pressure Boosting
  • Multi-Storey Cold Water Supply
  • Plant Room Variable Speed Systems
  • Potable Water Header Pressurisation

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
What maximum water delivery volume can this triple vertical pump assembly supply?

Operating discharge capability on the Calpeda BS3V 3MXV 40-917-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) delivers up to 650 L/min (39 m³/h) across three pumps in parallel duty assist mode, with each vertical multistage pump supplying up to 216.7 L/min (13 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Powered by Three Phase 400 V mains at 50 Hz, the BS3V 3MXV 40-917-ITT drives three 7.5 kW (10 HP) motors totaling 22.5 kW governed by three communicating Calpeda I-MAT variable speed converters.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Maximum static elevation on the BS3V-3MXV-40-917-ITT achieves up to 184 metres while withstanding casing pressures up to 25 bar, rated for liquid temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Built with AISI 304 chromium-nickel stainless steel pump casings and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3 MXV 40 917 ITT includes Hard Metal-Carbon-EPDM mechanical seals with G 3" BSP suction and G 3" BSP delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Equipment protection on the 3MXV 40-917-ITT is backed by Calpeda manufacturer warranty terms guarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed