Calpeda BS3V 3MXV 50-1512-ITT 3 x 9.2kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 50-1512-ITT

Calpeda BS3V 3MXV 50-1512-ITT 3 x 9.2kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$60,718.68 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
1200 L/Min
Max Head
159 m
Power
3 x 9.2 kW / 415v
Ideal Use
Commercial Booster Pump Systems

Product Overview

Demanding commercial plumbing networks experience substantial flow variations requiring automated pressure boosting. The Calpeda BS3V 3MXV 50-1512-ITT triplex system incorporates 3 Calpeda MXV 50-1512 vertical multistage pumps in parallel to deliver balanced water circulation for multi-tenant commercial towers and dedicated floor-by-floor risers. Under closed-valve conditions, the vertical multistage stacks develop a maximum shut-off head of 159 m to overcome vertical building height. When demand reaches operational peaks, the parallel pumping assembly achieves a maximum delivery capacity of 1200 L/Min across distribution outlets.

System line pressure is dynamically stabilized by an integrated motor-mounted Calpeda I-MAT frequency converter working in synchronized triplex pump orchestration. A high-precision digital transducer measures header pressure continuously, allowing the inverter to vary impeller velocity in direct response to consumer draw. Engineered acceleration ramps eliminate hydraulic water hammer, reducing physical stress on pipe joints, valves, and building plumbing infrastructure. The onboard control architecture includes comprehensive digital fault detection, automatically stopping the pumps during dry-run, power supply, or thermal overload events.

Wetted hydraulic components are fabricated from certified AISI 304 stainless steel, including intermediate stage bowls, precision impellers, casings, and pump shafts. The three pumping units tie into AISI 304 stainless steel headers having standardized 80 mm suction and 80 mm delivery ports with G 3" BSP threaded fittings. Dedicated full-bore isolation ball valves and check valves secure each pump line, anchored to a rigid AISI 304 stainless steel structural mounting skid.

Electric propulsion is delivered via three 2-pole asynchronous induction motors built strictly for standard Australian commercial three-phase 400 V (50 Hz) power supplies. Operating at 2900 rpm, the triple-motor assembly provides 3 x 9.2 kW of mechanical shaft energy and absorbs a rated full-load current of 3 x 17.5 Amps. Heavy-duty stator windings with Class F thermal insulation ensure dependable mechanical longevity under continuous plant room commercial operation.

Key Features

  • Triplex vertical multistage configuration with three Calpeda MXV 50-1512 12-stage pumps maintains continuous line pressure stability.
  • Motor-mounted Calpeda I-MAT frequency converter continuously modulates operating speed to maintain target line pressure.
  • Complete AISI 304 stainless steel hydraulic construction covering pump housings, diffuser stages, and impellers ensures lasting fluid purity.
  • Totally enclosed fan-cooled electric motors feature IP55 ingress protection and Class F thermal insulation for harsh commercial duties.
  • Thermal operating envelope safely accommodates clean liquid media ranging from -15 °C to +110 °C.
  • Controlled motor ramping curves prevent abrupt pressure spikes and protect building distribution lines from hydraulic shock.
  • Integrated digital safety electronics provide automated shutdown protection against dry-running, motor overcurrent, and electrical supply faults.
  • Common stainless steel manifolds with DN 100 Table E flanged connections ensure rigid mechanical alignment and easy installation.
  • Coordinated duty-assist staging balances operational run hours across the three pumps for uniform long-term component wear.
  • Covered by an official 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 50-1512 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow1200 L/Min
Max Head159 m
Power3 x 9.2 kW / 415v
Rated Current3 x 17.5 Amps
Suitable ForCommercial Booster Pump Systems
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size100 mm
Outlet Size100 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

The Calpeda BS3V 3MXV 50-1512-ITT 3 x 9.2kW Variable Speed Triple Pump Booster Set with I-MAT Converter offers triplex pump redundancy and intelligent speed control for commercial building services and plumbing risers. As demand rises across the facility, integrated Calpeda I-MAT inverters bring assist pumps online progressively, supplying up to 1200 L/Min maximum flow and maintaining a maximum shut-off head of 159 m without line shock. Constructed with durable 304 Stainless Steel wet ends and dual 100 mm manifold connections, the skid provides long-term corrosion resistance and whisper-quiet plant room operation.

  • Commercial Office Water Pressure Supply
  • Multi-Tenant Facility Water Boosting
  • Plant Room Cold Water Distribution
  • Automated Variable Speed Reticulation

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
What pump housing alloys, impeller materials, and common manifold connections are provided?

Shared pipework geometry on the Calpeda BS3V 3MXV 50-1512-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) features AISI 304 chromium-nickel stainless steel pump casings with AISI 304 stainless steel impellers and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 50-1512-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Operating in parallel duty assist mode, the BS3V-3MXV-50-1512-ITT reaches up to 1200 L/min (72 m³/h) across three pumps, with individual pump units delivering up to 400 L/min (24 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 50 1512 ITT couples three 9.2 kW (12.5 HP) motors totaling 27.6 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Hydraulic pressure boundaries enable the 3MXV 50-1512-ITT to attain up to 159 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed