Calpeda BS3V 3MXV 50-1515-ITT 3 x 11kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 50-1515-ITT

Calpeda BS3V 3MXV 50-1515-ITT 3 x 11kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$62,879.74 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
1200 L/Min
Max Head
199 m
Power
3 x 11 kW / 415v
Ideal Use
Industrial Plant Water Boosting

Product Overview

Multi-floor sanitary systems require intelligent staging to maintain steady line pressure across wide demand variations. This variable-speed triplex booster system couples 3 Calpeda MXV 50-1515 vertical multistage pumps on shared manifolds to service commercial office developments and centralized HVAC make-up water mains. Under closed-valve conditions, the multi-impeller pump stacks achieve a maximum shut-off head of 199 m to supply elevated pipework. When building draw peaks, the parallel pumping configuration provides a maximum volumetric flow rate of 1200 L/Min across distribution outlets.

Dynamic pressure balancing is executed through a motor-mounted Calpeda I-MAT variable frequency converter programmed for automated triplex staging. Line pressure feedback from an electronic transducer allows the controller to adjust motor frequencies instantaneously as plumbing demand shifts. Engineered soft-start ramp curves eliminate hydraulic water hammer shock, protecting mechanical backflow preventers, valves, and joints from fatigue. Internal protective monitoring provides automatic system shutdown in response to low-water suction faults, motor overload, or incoming phase failure.

Complete AISI 304 stainless steel construction of the pump housings, stages, and impellers ensures long-lasting hydraulic durability under continuous water circulation. The three vertical pumps tie into heavy-duty stainless steel distribution headers featuring 80 mm suction and 80 mm delivery ports with G 3" BSP threaded fittings. Individual isolation valves and non-return check valves service each pump run, mounted alongside an analog pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate.

Drive power is supplied by three 2-pole commercial induction electric motors engineered for Australian three-phase 400 V (50 Hz) electrical mains. Operating at 2900 rpm, the three motors generate 3 x 11 kW of mechanical drive capacity while absorbing a rated full-load current of 3 x 20.8 Amps. Class F winding insulation and IP55 weatherproof enclosures guarantee long-term thermal endurance under demanding plant room service conditions.

Key Features

  • Parallel triplex arrangement of three Calpeda MXV 50-1515 15-stage vertical multistage pumps ensures dependable hydraulic delivery.
  • Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
  • Complete AISI 304 stainless steel hydraulic construction covering pump housings, diffuser stages, and impellers ensures lasting fluid purity.
  • Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
  • Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
  • Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
  • Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
  • Pre-assembled G 3" BSP threaded fittings distribution manifolds allow direct, streamlined site pipework connection.
  • Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
  • Backed by a comprehensive 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 50-1515 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow1200 L/Min
Max Head199 m
Power3 x 11 kW / 415v
Rated Current3 x 20.8 Amps
Suitable ForIndustrial Plant Water Boosting
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size100 mm
Outlet Size100 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Operating with a maximum shut-off head of 199 m and a peak flow capacity of 1200 L/Min, the Calpeda BS3V 3MXV 50-1515-ITT 3 x 11kW Variable Speed Triple Pump Booster Set with I-MAT Converter eliminates pressure loss across high-rise commercial infrastructure. Integrated Calpeda I-MAT variable speed drives regulate pump speed in real time to match building draw, keeping line pressure constant throughout peak operating hours. Pre-plumbed dual 100 mm manifolds, non-return check valves, and an integrated pressure accumulator arrive fully mounted on a rigid baseplate for rapid installation.

  • Commercial Complex Water Pressure Boosting
  • Multi-Storey Cold Water Supply
  • Plant Room Variable Speed Systems
  • Potable Water Header Pressurisation

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
Could you detail the motor propulsion and variable speed inverters fitted on this set?

Synchronized drive control on the Calpeda BS3V 3MXV 50-1515-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) utilizes Three Phase 400 V power at 50 Hz to drive three 11 kW (15 HP) motors totaling 33 kW, coordinated by three communicating Calpeda I-MAT inverters.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Developing up to 199 metres of maximum static head, the BS3V 3MXV 50-1515-ITT sustains internal casing pressures up to 25 bar across fluid operating temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Wetted construction on the BS3V-3MXV-50-1515-ITT combines AISI 304 chromium-nickel stainless steel pump casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, linked by DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Warranty protection supporting the BS3V 3 MXV 50 1515 ITT encompasses full Calpeda coverage for the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

To accommodate heavy site consumption, the 3MXV 50-1515-ITT provides up to 1200 L/min (72 m³/h) across three pumps under automated variable speed coordination, with each unit rated to 400 L/min (24 m³/h).

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed