Calpeda BS3V 3MXV 50-1517-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 50-1517-ITT

Calpeda BS3V 3MXV 50-1517-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$82,840.29 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
1200 L/Min
Max Head
224 m
Power
3 x 15 kW / 415v
Ideal Use
Factory Water Pressure Boosting

Product Overview

Commercial facilities rely on continuous line pressure to support multi-point fixture demand. This variable-speed triplex package integrates 3 Calpeda MXV 50-1517 vertical multistage pumps in parallel across modern residential apartment complexes and pressurized central pipework. During peak facility draw, the set delivers a peak volumetric flow rate of 1200 L/Min to supply all fixtures concurrently. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 224 m for static building elevation.

Proportional speed regulation is provided by a motor-mounted Calpeda I-MAT frequency converter engineered for multi-pump constant-pressure control. A digital pressure sensor mounted on the delivery manifold provides real-time signal feedback, prompting the inverter to trim motor velocity to match usage. Gradual acceleration and deceleration cycles isolate building pipework from rapid pressure transients, eliminating hydraulic hammer shocks. Comprehensive electronic protection automatically halts pump operation in the event of suction dry-run conditions, phase loss, or motor overcurrent.

Built for hygiene and corrosion immunity, the pumps incorporate AISI 304 stainless steel casings, stage chambers, impellers, and internal drive sleeves. Rigid AISI 304 stainless steel headers connect the three pumps via 100 mm suction and 100 mm discharge connections with DN 100 Table E flanged connections. Dedicated isolation valves and check valves protect each hydraulic line, accompanied by a delivery pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate frame.

Three industrial 2-pole induction electric motors deliver continuous mechanical power from standard Australian three-phase 400 V (50 Hz) mains. Operating at a rated speed of 2900 rpm, the three drives deliver 3 x 15 kW of mechanical drive while drawing 3 x 27.5 Amps at rated full load. Heavy-duty motor construction and Class F electrical insulation maintain steady thermal performance across continuous operational duty cycles.

Key Features

  • Synchronized triple vertical multistage 17-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
  • An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
  • Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers ensure superior corrosion resistance.
  • Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
  • Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
  • Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
  • Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
  • Standardized DN 100 Table E flanged manifold connections simplify mechanical alignment and expedite site pipework installation.
  • Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
  • Backed by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 50-1517 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow1200 L/Min
Max Head224 m
Power3 x 15 kW / 415v
Rated Current3 x 27.5 Amps
Suitable ForFactory Water Pressure Boosting
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size100 mm
Outlet Size100 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Delivering a maximum flow rate of 1200 L/Min and reaching a maximum shut-off head of 224 m, the Calpeda BS3V 3MXV 50-1517-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter ensures uninterrupted water distribution across commercial facilities requiring steady mains pressure. The triplex system features three Calpeda MXV vertical multistage pumps governed by motor-mounted I-MAT frequency inverters, automatically matching pump speeds to live user demand while soft-starting to eliminate pipe shudder. The factory-assembled skid is built on a heavy-duty structural baseplate with pre-plumbed dual 100 mm manifold connections, dedicated isolation valves, and an integrated membrane pressure vessel ready for immediate plant room connection.

  • Commercial Building Water Boosting
  • Multi-Storey Residential Water Supply
  • Potable Mains Pressure Maintenance
  • Plant Room Variable Speed Systems

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
In what materials are the wetted pump stages, mechanical seals, and suction delivery manifolds built?

Connection port fittings on the Calpeda BS3V 3MXV 50-1517-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) feature AISI 304 chromium-nickel stainless steel pump casings with AISI 304 stainless steel impellers and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 50-1517-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Operating in parallel duty assist mode, the BS3V-3MXV-50-1517-ITT reaches up to 1200 L/min (72 m³/h) across three pumps, with individual pump units delivering up to 400 L/min (24 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 50 1517 ITT couples three 15 kW (20 HP) motors totaling 45 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Hydraulic pressure boundaries enable the 3MXV 50-1517-ITT to attain up to 224 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed