Calpeda BS3V 3MXV 50-2005-ITT 3 x 5.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 50-2005-ITT

Calpeda BS3V 3MXV 50-2005-ITT 3 x 5.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$48,117.02 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
1400 L/Min
Max Head
70 m
Power
3 x 5.5 kW / 415v
Ideal Use
Central Potable Water Boosting

Product Overview

Fluctuating draw-off across elevated piping circuits requires responsive, continuous pressure maintenance. The Calpeda BS3V 3MXV 50-2005-ITT booster assembly connects 3 Calpeda MXV 50-2005 vertical multistage pumps in parallel to maintain smooth delivery across public transport infrastructure hubs and commuter terminal water supplies. When working against closed delivery valves, the hydraulic assemblies generate a maximum static closed-valve head of 70 m for elevation. During peak facility draw, the three-pump set delivers a peak volumetric flow rate of 1400 L/Min to supply all fixtures concurrently.

System line pressure is dynamically stabilized by an integrated motor-mounted Calpeda I-MAT frequency converter working in synchronized triplex pump orchestration. A high-precision digital transducer measures header pressure continuously, allowing the inverter to vary impeller velocity in direct response to consumer draw. Engineered acceleration ramps eliminate hydraulic water hammer, reducing physical stress on pipe joints, valves, and building plumbing infrastructure. The onboard control architecture includes comprehensive digital fault detection, automatically stopping the pumps during dry-run, power supply, or thermal overload events.

Wetted hydraulic components are fabricated from certified AISI 304 stainless steel, including intermediate stage bowls, precision impellers, casings, and pump shafts. The three pumping units tie into AISI 304 stainless steel headers having standardized 80 mm suction and 80 mm delivery ports with G 3" BSP threaded fittings. Dedicated full-bore isolation ball valves and check valves secure each pump line, anchored to a rigid AISI 304 stainless steel structural mounting skid.

Electric propulsion is delivered via three 2-pole asynchronous induction motors built strictly for standard Australian commercial three-phase 400 V (50 Hz) power supplies. Operating at 2900 rpm, the triple-motor assembly provides 3 x 5.5 kW of mechanical shaft energy and absorbs a rated full-load current of 3 x 10.7 Amps. Heavy-duty stator windings with Class F thermal insulation ensure dependable mechanical longevity under continuous plant room commercial operation.

Key Features

  • Three Calpeda MXV 50-2005 vertical multistage 5-stage pumps configured on shared manifolds supply high-efficiency constant-pressure boosting.
  • Continuous setpoint pressure is governed by an integrated motor-mounted Calpeda I-MAT variable frequency inverter.
  • Corrosion-resistant AISI 304 stainless steel wet ends provide long-term hydraulic durability and chemical immunity in clean water service.
  • Heavy-duty electric motors are rated to IP55 ingress standards with Class F thermal insulation for continuous commercial duty.
  • Verified operating limits safely circulate clean commercial liquids across a working temperature spectrum of -15 °C to +110 °C.
  • Gradual soft-start and soft-stop acceleration ramps isolate distribution pipework from hydraulic water hammer shock.
  • Built-in digital diagnostic monitoring delivers automatic safety cut-out protection in the event of dry-run or phase supply faults.
  • Standardized G 3" BSP threaded fittings suction and discharge headers ensure straightforward plumbing integration into commercial risers.
  • Integrated duty-assist sequencing evenly distributes operational hours across the three pump units to prevent uneven service wear.
  • Covered by a standard 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 50-2005 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow1400 L/Min
Max Head70 m
Power3 x 5.5 kW / 415v
Rated Current3 x 10.7 Amps
Suitable ForCentral Potable Water Boosting
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size100 mm
Outlet Size100 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

The Calpeda BS3V 3MXV 50-2005-ITT 3 x 5.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter is engineered for commercial building services and plumbing risers where reliable water pressure is essential. Three Calpeda MXV vertical multistage pumps operate in tandem under the control of integrated I-MAT frequency inverters. The system delivers a maximum flow rate of 1400 L/Min and reaches a maximum shut-off head of 70 m, automatically ramping down during low-demand periods to conserve power. Factory-fitted dual 100 mm stainless steel manifolds, isolation ball valves, and a membrane pressure vessel ensure straightforward plant room connection.

  • High-Density Residential Water Supply
  • Commercial Riser Pressure Reticulation
  • Variable Speed Domestic Water Reticulation
  • Building Services Pressure Systems

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
What structural baseplate material, wetted metallurgy, and common manifold ports are used?

Physical port architecture on the Calpeda BS3V 3MXV 50-2005-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) features AISI 304 chromium-nickel stainless steel pump casings with AISI 304 stainless steel impellers and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 50-2005-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Operating in parallel duty assist mode, the BS3V-3MXV-50-2005-ITT reaches up to 1400 L/min (84 m³/h) across three pumps, with individual pump units delivering up to 466.7 L/min (28 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 50 2005 ITT couples three 5.5 kW (7.5 HP) motors totaling 16.5 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Hydraulic pressure boundaries enable the 3MXV 50-2005-ITT to attain up to 70 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed