Roll over image to zoom
SKU: BS3V 3MXV 50-2010-ITT
Calpeda BS3V 3MXV 50-2010-ITT 3 x 11kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Multi-floor sanitary systems require intelligent staging to maintain steady line pressure across wide demand variations. This variable-speed triplex booster system couples 3 Calpeda MXV 50-2010 vertical multistage pumps on shared manifolds to service hospitality accommodation resorts and multi-villa pressurized mains. Under closed-valve conditions, the multi-impeller pump stacks achieve a maximum shut-off head of 144 m to supply elevated pipework. When building draw peaks, the parallel pumping configuration provides a maximum volumetric flow rate of 1400 L/Min across distribution outlets.
Proportional speed regulation is provided by a motor-mounted Calpeda I-MAT frequency converter engineered for multi-pump constant-pressure control. A digital pressure sensor mounted on the delivery manifold provides real-time signal feedback, prompting the inverter to trim motor velocity to match usage. Gradual acceleration and deceleration cycles isolate building pipework from rapid pressure transients, eliminating hydraulic hammer shocks. Comprehensive electronic protection automatically halts pump operation in the event of suction dry-run conditions, phase loss, or motor overcurrent.
Built for hygiene and corrosion immunity, the pumps incorporate AISI 304 stainless steel casings, stage chambers, impellers, and internal drive sleeves. Rigid AISI 304 stainless steel headers connect the three pumps via 100 mm suction and 100 mm discharge connections with DN 100 Table E flanged connections. Dedicated isolation valves and check valves protect each hydraulic line, accompanied by a delivery pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate frame.
Three industrial 2-pole induction electric motors deliver continuous mechanical power from standard Australian three-phase 400 V (50 Hz) mains. Operating at a rated speed of 2900 rpm, the three drives deliver 3 x 11 kW of mechanical drive while drawing 3 x 20.8 Amps at rated full load. Heavy-duty motor construction and Class F electrical insulation maintain steady thermal performance across continuous operational duty cycles.
Key Features
- Parallel triplex arrangement of three Calpeda MXV 50-2010 10-stage vertical multistage pumps ensures dependable hydraulic delivery.
- Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
- Complete AISI 304 stainless steel hydraulic construction covering pump housings, diffuser stages, and impellers ensures lasting fluid purity.
- Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
- Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
- Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
- Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
- Pre-assembled G 3" BSP threaded fittings distribution manifolds allow direct, streamlined site pipework connection.
- Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
- Backed by a comprehensive 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 50-2010 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 1400 L/Min |
| Max Head | 144 m |
| Power | 3 x 11 kW / 415v |
| Rated Current | 3 x 20.8 Amps |
| Suitable For | Commercial Precinct Water Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 100 mm |
| Outlet Size | 100 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which casing alloys, shaft seal materials, and common pipework connection sizes are fitted?
Suction and delivery plumbing on the Calpeda BS3V 3MXV 50-2010-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) features AISI 304 chromium-nickel stainless steel pump casings with AISI 304 stainless steel impellers and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 50-2010-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Operating in parallel duty assist mode, the BS3V-3MXV-50-2010-ITT reaches up to 1400 L/min (84 m³/h) across three pumps, with individual pump units delivering up to 466.7 L/min (28 m³/h).
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 50 2010 ITT couples three 11 kW (15 HP) motors totaling 33 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Hydraulic pressure boundaries enable the 3MXV 50-2010-ITT to attain up to 144 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










