Roll over image to zoom
SKU: BS3V 3MXV 50-2011-ITT
Calpeda BS3V 3MXV 50-2011-ITT 3 x 11kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Reliable line pressure management across commercial networks protects sanitary fixtures from pressure fluctuations. The Calpeda BS3V 3MXV 50-2011-ITT booster system operates 3 Calpeda MXV 50-2011 vertical multistage pumps in parallel to ensure uniform pressure across urban residential towers and centralized potable water supply risers. During peak simultaneous fixture demand, the three-pump assembly delivers a maximum flow rate of 1400 L/Min at minimal line head. Working against closed valves, the multistage hydraulic wet ends generate a maximum static delivery head of 159 m for elevation.
Consistent delivery pressure across fluctuating building demand is sustained by a motor-mounted Calpeda I-MAT variable frequency converter. The drive processes real-time transducer signals from the discharge header, adjusting pump operating speeds smoothly to satisfy instant consumption. Programmed ramp profiles prevent pipework water hammer, preserving the mechanical integrity of connected fittings, valves, and distribution lines. Automated digital safety safeguards ensure reliable shut-off protection if dry-running, phase supply faults, or motor overloads are detected.
Hydraulic wet ends are manufactured from AISI 304 stainless steel, encompassing pump casings, stage bowls, impellers, and drive shafts for high chemical resistance. The triplex pump array connects into common AISI 304 stainless steel manifolds featuring 100 mm suction and 100 mm delivery connections with DN 100 Table E flanged connections. Individual isolation ball valves and check valves isolate each pump branch, supported by an analog line gauge on an AISI 304 mounting base.
Pumping drive is provided by three commercial 2-pole induction electric motors engineered strictly for Australian three-phase 400 V (50 Hz) power infrastructure. Rotating at a nominal speed of 2900 rpm, the three motors provide 3 x 11 kW of total output with a rated full-load current draw of 3 x 20.8 Amps. High-grade copper stator windings and Class F insulation ensure dependable mechanical operation under continuous plant room conditions.
Key Features
- Triplex vertical multistage configuration with three Calpeda MXV 50-2011 11-stage pumps maintains continuous line pressure stability.
- Motor-mounted Calpeda I-MAT frequency converter continuously modulates operating speed to maintain target line pressure.
- Corrosion-resistant AISI 304 stainless steel wet ends provide long-term hydraulic durability and chemical immunity in clean water service.
- Totally enclosed fan-cooled electric motors feature IP55 ingress protection and Class F thermal insulation for harsh commercial duties.
- Thermal operating envelope safely accommodates clean liquid media ranging from -15 °C to +110 °C.
- Controlled motor ramping curves prevent abrupt pressure spikes and protect building distribution lines from hydraulic shock.
- Integrated digital safety electronics provide automated shutdown protection against dry-running, motor overcurrent, and electrical supply faults.
- Common stainless steel manifolds with DN 100 Table E flanged connections ensure rigid mechanical alignment and easy installation.
- Coordinated duty-assist staging balances operational run hours across the three pumps for uniform long-term component wear.
- Covered by a standard 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 50-2011 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 1400 L/Min |
| Max Head | 159 m |
| Power | 3 x 11 kW / 415v |
| Rated Current | 3 x 20.8 Amps |
| Suitable For | Multi-Tenancy Building Water Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 100 mm |
| Outlet Size | 100 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What product warranty protection is supplied by Calpeda for this three-pump system?
Official manufacturer backing for the Calpeda BS3V 3MXV 50-2011-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) provides full Calpeda manufacturer warranty coverage protecting the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Under peak distribution demand, the BS3V 3MXV 50-2011-ITT supplies up to 1400 L/min (84 m³/h) across three pumps, where each vertical multistage pump provides up to 466.7 L/min (28 m³/h).
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Electrical propulsion for the BS3V-3MXV-50-2011-ITT draws Three Phase 400 V power at 50 Hz, energizing three 11 kW (15 HP) electric motors totaling 33 kW modulated by three communicating Calpeda I-MAT drives.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Within elevated discharge circuits, the BS3V 3 MXV 50 2011 ITT generates up to 159 metres of head and accommodates casing pressures up to 25 bar across liquid temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Physical metallurgy across the 3MXV 50-2011-ITT encompasses AISI 304 chromium-nickel stainless steel pump casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals on a Zinc-plated Steel S235JR Baseplate, with DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










