Calpeda BS3V 3MXV 50-2012-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 50-2012-ITT

Calpeda BS3V 3MXV 50-2012-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$80,170.31 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
1400 L/Min
Max Head
172 m
Power
3 x 15 kW / 415v
Ideal Use
Facility Mains Pressure Boosting

Product Overview

Commercial facilities rely on continuous line pressure to support multi-point fixture demand. This variable-speed triplex package integrates 3 Calpeda MXV 50-2012 vertical multistage pumps in parallel across commercial service complexes and multi-tenant retail building circuits. During peak facility draw, the set delivers a peak volumetric flow rate of 1400 L/Min to supply all fixtures concurrently. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 172 m for static building elevation.

Continuous line pressure stability is maintained by an integrated motor-mounted Calpeda I-MAT frequency converter programmed for automated triplex duty-assist staging. The variable speed drive tracks line pressure via a digital pressure transducer and modulates operating speed in real time to match consumer draw-off. Controlled acceleration and deceleration ramp profiles prevent hydraulic shock, substantially eliminating pipework water hammer and extending system service life. Integrated electronic safety functions provide automatic shutdown protection against dry-running, motor overcurrent, and phase supply faults.

Hydraulic construction utilizes premium AISI 304 stainless steel across the pump casings, intermediate stage chambers, impellers, and drive shafts for superior corrosion resistance. The three pumping units connect into common AISI 304 stainless steel manifolds featuring matching 100 mm suction and 100 mm delivery connections with DN 100 Table E flanged connections. Each pump line incorporates dedicated isolation ball valves and non-return check valves, alongside a delivery visual pressure gauge and heavy-duty zinc-plated steel (S235JR) structural baseplate.

Mechanical drive is delivered by three high-efficiency 2-pole induction electric motors engineered specifically for Australian three-phase 400 V (50 Hz) commercial electrical supplies. Operating smoothly at a rated speed of 2900 rpm, the three electric motors produce 3 x 15 kW of shaft power and draw a rated full-load current of 3 x 27.5 Amps. Precision motor engineering and Class F winding insulation ensure continuous thermal endurance and reliable energy conversion across demanding commercial operational cycles.

Key Features

  • Synchronized triple vertical multistage 12-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
  • An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
  • Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers ensure superior corrosion resistance.
  • Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
  • Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
  • Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
  • Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
  • Standardized DN 100 Table E flanged manifold connections simplify mechanical alignment and expedite site pipework installation.
  • Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
  • Backed by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 50-2012 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow1400 L/Min
Max Head172 m
Power3 x 15 kW / 415v
Rated Current3 x 27.5 Amps
Suitable ForFacility Mains Pressure Boosting
Body Material304 Stainless Steel
Liquid Temperature-15°C to +110°C
Inlet Size100 mm
Outlet Size100 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Energy-efficient pressure maintenance across multi-storey residential apartment buildings is delivered by the Calpeda BS3V 3MXV 50-2012-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter. An integrated Calpeda I-MAT variable frequency drive continuously modulates motor output, soft-starting motors to prevent line hammer while delivering a maximum flow capacity of 1400 L/Min and reaching a maximum shut-off head of 172 m. The skid arrives fully assembled on a structural chassis with dual 100 mm manifold connections, dedicated non-return valves, and an expansion vessel.

  • Multi-Unit Residential Water Supply
  • Commercial Building Services Boosting
  • Potable Mains Pressure Maintenance
  • Central Plant Room Booster Sets

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
Can you state the peak water flow output of this triple multistage package?

Rated volumetric output on the Calpeda BS3V 3MXV 50-2012-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) delivers up to 1400 L/min (84 m³/h) across three pumps in parallel duty assist mode, with each vertical multistage pump supplying up to 466.7 L/min (28 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Powered by Three Phase 400 V mains at 50 Hz, the BS3V 3MXV 50-2012-ITT drives three 15 kW (20 HP) motors totaling 45 kW governed by three communicating Calpeda I-MAT variable speed converters.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Maximum static elevation on the BS3V-3MXV-50-2012-ITT achieves up to 172 metres while withstanding casing pressures up to 25 bar, rated for liquid temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Built with AISI 304 chromium-nickel stainless steel pump casings and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3 MXV 50 2012 ITT includes Hard Metal-Carbon-EPDM mechanical seals with DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Equipment protection on the 3MXV 50-2012-ITT is backed by Calpeda manufacturer warranty terms guarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed