Roll over image to zoom
SKU: BS3V 3MXV 50-2014-ITT
Calpeda BS3V 3MXV 50-2014-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Maintaining uniform delivery pressure across extensive developments demands balanced hydraulic support. Built with 3 Calpeda MXV 50-2014 vertical multistage pumps in parallel, this variable-speed triplex package ensures continuous stability for metropolitan commercial complexes and multi-level office water systems. At peak consumption, the three-pump configuration produces a peak volumetric flow rate of 1400 L/Min to sustain commercial operations. Under closed-valve conditions, the vertical multistage stacks develop a maximum shut-off head of 201 m to overcome building height.
Precise setpoint pressure is sustained across fluctuating facility draw through an integrated motor-mounted Calpeda I-MAT variable frequency converter. An electronic pressure transducer continuously feeds line data to the integrated controller, modulating pump speed to deliver exact flow requirements without pressure spikes. Smooth soft-start and soft-stop ramp profiles protect building distribution pipework from mechanical water hammer and sudden pressure waves. Built-in electronic monitoring systems deliver automatic safety shutdown protection in the event of dry-run conditions, electrical phase imbalance, or motor overload.
Corrosion-resistant AISI 304 stainless steel metallurgy extends across the entire hydraulic assembly, including stage chambers, precision impellers, casings, and pump shafts. Hydraulic flow distributes through common AISI 304 stainless steel manifolds with standardized 100 mm suction and 100 mm delivery connections with DN 100 Table E flanged connections. Independent isolation valves and check valves service each pump run, mounted alongside an analog delivery pressure gauge upon an AISI 304 stainless steel baseplate frame.
Synchronous mechanical output is supplied by three 2-pole commercial induction motors matched to Australian three-phase 400 V (50 Hz) power standards. Rotating at a nominal operating speed of 2900 rpm, the three-motor assembly delivers 3 x 15 kW of total drive power while drawing a rated full-load current of 3 x 27.5 Amps. High-efficiency motor design maintains balanced electrical consumption and robust mechanical performance across varying commercial pressure demands.
Key Features
- Parallel triplex arrangement of three Calpeda MXV 50-2014 14-stage vertical multistage pumps ensures dependable hydraulic delivery.
- Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
- Corrosion-resistant AISI 304 stainless steel wet ends provide long-term hydraulic durability and chemical immunity in clean water service.
- Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
- Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
- Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
- Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
- Pre-assembled G 3" BSP threaded fittings distribution manifolds allow direct, streamlined site pipework connection.
- Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
- Supported by a 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 50-2014 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 1400 L/Min |
| Max Head | 201 m |
| Power | 3 x 15 kW / 415v |
| Rated Current | 3 x 27.5 Amps |
| Suitable For | Building Services Pressure Systems |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 100 mm |
| Outlet Size | 100 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What maximum vertical pumping lift and fluid temperature limits govern this triple assembly?
Casing pressure thresholds on the Calpeda BS3V 3MXV 50-2014-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) reach a maximum elevation head of 201 metres with a maximum casing pressure of 25 bar, moving clean fluids at temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Constructed with AISI 304 chromium-nickel stainless steel pump casings and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3MXV 50-2014-ITT incorporates Hard Metal-Carbon-EPDM mechanical seals alongside DN 100 Flanged suction and DN 100 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Factory warranty provisions for the BS3V-3MXV-50-2014-ITT cover the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Rated for maximum volumetric throughput, the BS3V 3 MXV 50 2014 ITT yields up to 1400 L/min (84 m³/h) with all three pumps active, each supplying up to 466.7 L/min (28 m³/h) to maintain line pressure.
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Mains supply requirements for the 3MXV 50-2014-ITT specify Three Phase 400 V at 50 Hz to run three 15 kW (20 HP) motors totaling 45 kW under triple communicating I-MAT inverter control.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










