Calpeda BS3V 3MXV 65-3204-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 65-3204-ITT

Calpeda BS3V 3MXV 65-3204-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$58,548.21 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
2200 L/Min
Max Head
69 m
Power
3 x 7.5 kW / 415v
Ideal Use
High-Rise Commercial Water Supply

Product Overview

Balancing pressure across commercial risers requires steady performance and rapid response to flow changes. This triplex booster installation couples 3 Calpeda MXV 65-3204 vertical multistage pumps on common headers to supply dependable pressure for regional health service centers and medical clinic potable water loops. Operating against closed delivery isolation valves, the multistage pump stacks develop a maximum shut-off head of 69 m for vertical elevation. During maximum concurrent consumption, the three-pump array delivers a peak volumetric flow rate of 2200 L/Min across the distribution line.

Proportional speed regulation is provided by a motor-mounted Calpeda I-MAT frequency converter engineered for multi-pump constant-pressure control. A digital pressure sensor mounted on the delivery manifold provides real-time signal feedback, prompting the inverter to trim motor velocity to match usage. Gradual acceleration and deceleration cycles isolate building pipework from rapid pressure transients, eliminating hydraulic hammer shocks. Comprehensive electronic protection automatically halts pump operation in the event of suction dry-run conditions, phase loss, or motor overcurrent.

High-strength Cast Iron GJL 250 hydraulic casings protect internal AISI 304 stainless steel stage assemblies and impellers from mechanical stresses. The triplex pumping units tie into rigid stainless steel distribution manifolds with 150 mm ports and DN 150 Table E flanged connections. Independent ball valves and check valves isolate each pumping circuit, supported by a line pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate.

Three industrial 2-pole induction electric motors deliver continuous mechanical power from standard Australian three-phase 400 V (50 Hz) mains. Operating at a rated speed of 2900 rpm, the three drives deliver 3 x 7.5 kW of mechanical drive while drawing 3 x 14.3 Amps at rated full load. Heavy-duty motor construction and Class F electrical insulation maintain steady thermal performance across continuous operational duty cycles.

Key Features

  • Synchronized triple vertical multistage 4-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
  • An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
  • High-strength Cast Iron GJL 250 pump bodies with AISI 304 stainless steel internal wet ends provide maximum mechanical resistance.
  • Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
  • Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
  • Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
  • Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
  • Standardized DN 150 Table E flanged connections manifold connections simplify mechanical alignment and expedite site pipework installation.
  • Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
  • Supported by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 65-3204 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow2200 L/Min
Max Head69 m
Power3 x 7.5 kW / 415v
Rated Current3 x 14.3 Amps
Suitable ForHigh-Rise Commercial Water Supply
Body MaterialCast Iron
Liquid Temperature-15°C to +110°C
Inlet Size150 mm
Outlet Size150 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Energy-efficient pressure maintenance across commercial facilities requiring steady mains pressure is delivered by the Calpeda BS3V 3MXV 65-3204-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter. An integrated Calpeda I-MAT variable frequency drive continuously modulates motor output, soft-starting motors to prevent line hammer while delivering a maximum flow capacity of 2200 L/Min and reaching a maximum shut-off head of 69 m. The skid arrives fully assembled on a structural chassis with dual 150 mm manifold connections, dedicated non-return valves, and an expansion vessel.

  • Multi-Unit Residential Water Supply
  • Commercial Building Services Boosting
  • Potable Mains Pressure Maintenance
  • Central Plant Room Booster Sets

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
Which stainless steel impellers, casing materials, and common manifold sizes equip this unit?

Pump body metallurgy on the Calpeda BS3V 3MXV 65-3204-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) features Cast iron GJL 250 pump casings with AISI 304 stage casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 65-3204-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Operating in parallel duty assist mode, the BS3V-3MXV-65-3204-ITT reaches up to 2200 L/min (132 m³/h) across three pumps, with individual pump units delivering up to 733.3 L/min (44 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 65 3204 ITT couples three 7.5 kW (10 HP) motors totaling 22.5 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Hydraulic pressure boundaries enable the 3MXV 65-3204-ITT to attain up to 69 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed