Roll over image to zoom
SKU: BS3V 3MXV 65-3206-ITT
Calpeda BS3V 3MXV 65-3206-ITT 3 x 11kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Multi-floor sanitary systems require intelligent staging to maintain steady line pressure across wide demand variations. This variable-speed triplex booster system couples 3 Calpeda MXV 65-3206 vertical multistage pumps on shared manifolds to service commercial airport administrative facilities and airside water networks. Under closed-valve conditions, the multi-impeller pump stacks achieve a maximum shut-off head of 103 m to supply elevated pipework. When building draw peaks, the parallel pumping configuration provides a maximum volumetric flow rate of 2200 L/Min across distribution outlets.
Continuous line pressure stability is maintained by an integrated motor-mounted Calpeda I-MAT frequency converter programmed for automated triplex duty-assist staging. The variable speed drive tracks line pressure via a digital pressure transducer and modulates operating speed in real time to match consumer draw-off. Controlled acceleration and deceleration ramp profiles prevent hydraulic shock, substantially eliminating pipework water hammer and extending system service life. Integrated electronic safety functions provide automatic shutdown protection against dry-running, motor overcurrent, and phase supply faults.
Engineered for heavy commercial service, the hydraulic assembly features robust Cast Iron GJL 250 pump casings paired with AISI 304 stainless steel intermediate stage chambers and impellers. The three pumping units connect into heavy-duty stainless steel manifolds featuring matching 150 mm suction and 150 mm delivery connections with DN 150 Table E flanged connections. Each pump line incorporates dedicated isolation ball valves and non-return check valves, alongside a delivery visual pressure gauge and heavy-duty zinc-plated steel (S235JR) structural baseplate.
Mechanical drive is delivered by three high-efficiency 2-pole induction electric motors engineered specifically for Australian three-phase 400 V (50 Hz) commercial electrical supplies. Operating smoothly at a rated speed of 2900 rpm, the three electric motors produce 3 x 11 kW of shaft power and draw a rated full-load current of 3 x 20.8 Amps. Precision motor engineering and Class F winding insulation ensure continuous thermal endurance and reliable energy conversion across demanding commercial operational cycles.
Key Features
- Parallel triplex arrangement of three Calpeda MXV 65-3206 6-stage vertical multistage pumps ensures dependable hydraulic delivery.
- Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
- Cast Iron GJL 250 external housings encasing AISI 304 stainless steel impellers and stages ensure robust commercial durability.
- Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
- Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
- Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
- Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
- Pre-assembled DN 150 Table E flanged distribution manifolds allow direct, streamlined site pipework connection.
- Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
- Backed by a comprehensive 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 65-3206 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 2200 L/Min |
| Max Head | 103 m |
| Power | 3 x 11 kW / 415v |
| Rated Current | 3 x 20.8 Amps |
| Suitable For | Commercial High-Rise Water Boosting |
| Body Material | Cast Iron |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 150 mm |
| Outlet Size | 150 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What aggregate water discharge volume can this triple variable speed package provide?
Maximum flow rate on the Calpeda BS3V 3MXV 65-3206-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) delivers up to 2200 L/min (132 m³/h) across three pumps in parallel duty assist mode, with each vertical multistage pump supplying up to 733.3 L/min (44 m³/h).
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Powered by Three Phase 400 V mains at 50 Hz, the BS3V 3MXV 65-3206-ITT drives three 11 kW (15 HP) motors totaling 33 kW governed by three communicating Calpeda I-MAT variable speed converters.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Maximum static elevation on the BS3V-3MXV-65-3206-ITT achieves up to 103 metres while withstanding casing pressures up to 25 bar, rated for liquid temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Built with Cast iron GJL 250 pump casings, AISI 304 stage casings, and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3 MXV 65 3206 ITT includes Hard Metal-Carbon-EPDM mechanical seals with DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Equipment protection on the 3MXV 65-3206-ITT is backed by Calpeda manufacturer warranty terms guarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










