Calpeda BS3V 3MXV 65-3207-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 65-3207-ITT

Calpeda BS3V 3MXV 65-3207-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$88,660.93 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
2200 L/Min
Max Head
121 m
Power
3 x 15 kW / 415v
Ideal Use
Major Commercial Water Boosting

Product Overview

Reliable line pressure management across commercial networks protects sanitary fixtures from pressure fluctuations. The Calpeda BS3V 3MXV 65-3207-ITT booster system operates 3 Calpeda MXV 65-3207 vertical multistage pumps in parallel to ensure uniform pressure across educational campus lecture facilities and shared student amenities mains. During peak simultaneous fixture demand, the three-pump assembly delivers a maximum flow rate of 2200 L/Min at minimal line head. Working against closed valves, the multistage hydraulic wet ends generate a maximum static delivery head of 121 m for elevation.

Automated pressure regulation is governed by a motor-mounted Calpeda I-MAT variable frequency converter operating the three pumps in coordinated duty-assist staging. Stepless speed modulation continuously matches rotational velocity to instantaneous line demand, maintaining constant pressure while maximizing electrical efficiency. Gradual acceleration ramps eliminate disruptive hydraulic surges, protecting building pipework and inline fittings from mechanical water hammer stresses. Comprehensive digital diagnostics incorporate automated shut-off protection to safeguard the pumping assembly against dry running, phase loss, and overcurrent conditions.

Heavy-duty Cast Iron GJL 250 pump bodies deliver exceptional structural strength, housing corrosion-resistant AISI 304 stainless steel impellers, stage chambers, and internal sleeves. Triple vertical pumps couple directly to rigid stainless steel headers with 100 mm suction and 100 mm discharge ports equipped with DN 150 Table E flanged connections. Individual isolation ball valves and non-return check valves protect each branch, supported by an analog line pressure gauge on an AISI 304 stainless steel mounting base.

Power is provided by three heavy-duty 2-pole induction motors designed for continuous operation on Australian three-phase 400 V (50 Hz) electrical distribution networks. Running synchronously at 2900 rpm, the electric drives generate 3 x 15 kW of mechanical output with a rated operational full-load current draw of 3 x 27.5 Amps. High-grade electrical laminations and Class F thermal insulation deliver long-term mechanical reliability across continuous commercial duty cycles.

Key Features

  • Triplex vertical multistage configuration with three Calpeda MXV 65-3207 7-stage pumps maintains continuous line pressure stability.
  • Motor-mounted Calpeda I-MAT frequency converter continuously modulates operating speed to maintain target line pressure.
  • High-strength Cast Iron GJL 250 pump bodies with AISI 304 stainless steel internal wet ends provide maximum mechanical resistance.
  • Totally enclosed fan-cooled electric motors feature IP55 ingress protection and Class F thermal insulation for harsh commercial duties.
  • Thermal operating envelope safely accommodates clean liquid media ranging from -15 °C to +110 °C.
  • Controlled motor ramping curves prevent abrupt pressure spikes and protect building distribution lines from hydraulic shock.
  • Integrated digital safety electronics provide automated shutdown protection against dry-running, motor overcurrent, and electrical supply faults.
  • Common stainless steel manifolds with DN 150 Table E flanged connections fittings ensure rigid mechanical alignment and easy installation.
  • Coordinated duty-assist staging balances operational run hours across the three pumps for uniform long-term component wear.
  • Covered by a standard 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 65-3207 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow2200 L/Min
Max Head121 m
Power3 x 15 kW / 415v
Rated Current3 x 27.5 Amps
Suitable ForMajor Commercial Water Boosting
Body MaterialCast Iron
Liquid Temperature-15°C to +110°C
Inlet Size150 mm
Outlet Size150 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Designed to prevent hydraulic line shock and pipe rattle in commercial office towers and corporate facilities, the Calpeda BS3V 3MXV 65-3207-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter combines soft-starting variable speed electronics with three robust vertical multistage pumps. Motor-mounted I-MAT inverters dynamically share running hours across all three pumps, supplying a maximum flow delivery of 2200 L/Min and achieving a maximum shut-off head of 121 m across all building risers. The unit features dual 150 mm stainless steel manifold connections, isolation valves, and an integrated expansion tank ready for mechanical connection.

  • Multi-Level Building Water Boosting
  • Commercial Potable Mains Reticulation
  • Centralized Cold Water Supply
  • Inverter-Controlled Plant Room Systems

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
How does variable frequency drive technology control the three electric motor speeds?

Electric propulsion features on the Calpeda BS3V 3MXV 65-3207-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) utilize Three Phase 400 V power at 50 Hz to drive three 15 kW (20 HP) motors totaling 45 kW, coordinated by three communicating Calpeda I-MAT inverters.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Developing up to 121 metres of maximum static head, the BS3V 3MXV 65-3207-ITT sustains internal casing pressures up to 25 bar across fluid operating temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Wetted construction on the BS3V-3MXV-65-3207-ITT combines Cast iron GJL 250 pump casings, AISI 304 stage casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, linked by DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Warranty protection supporting the BS3V 3 MXV 65 3207 ITT encompasses full Calpeda coverage for the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

To accommodate heavy site consumption, the 3MXV 65-3207-ITT provides up to 2200 L/min (132 m³/h) across three pumps under automated variable speed coordination, with each unit rated to 733.3 L/min (44 m³/h).

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed