Roll over image to zoom
SKU: BS3V 3MXV 65-3208-ITT
Calpeda BS3V 3MXV 65-3208-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Commercial facilities rely on continuous line pressure to support multi-point fixture demand. This variable-speed triplex package integrates 3 Calpeda MXV 65-3208 vertical multistage pumps in parallel across high-density residential towers and balanced pressure distribution headers. During peak facility draw, the set delivers a peak volumetric flow rate of 2200 L/Min to supply all fixtures concurrently. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 138 m for static building elevation.
Precise setpoint pressure is sustained across fluctuating facility draw through an integrated motor-mounted Calpeda I-MAT variable frequency converter. An electronic pressure transducer continuously feeds line data to the integrated controller, modulating pump speed to deliver exact flow requirements without pressure spikes. Smooth soft-start and soft-stop ramp profiles protect building distribution pipework from mechanical water hammer and sudden pressure waves. Built-in electronic monitoring systems deliver automatic safety shutdown protection in the event of dry-run conditions, electrical phase imbalance, or motor overload.
Constructed with Cast Iron GJL 250 hydraulic casings and AISI 304 stainless steel wet ends, the pumps deliver outstanding mechanical durability under continuous high-pressure service. Hydraulic flow distributes through common stainless steel manifolds with standardized 100 mm suction and 100 mm delivery fittings with DN 150 Table E flanged connections. Independent isolation valves and check valves service each pump run, mounted alongside an analog delivery pressure gauge upon an AISI 304 stainless steel baseplate frame.
Synchronous mechanical output is supplied by three 2-pole commercial induction motors matched to Australian three-phase 400 V (50 Hz) power standards. Rotating at a nominal operating speed of 2900 rpm, the three-motor assembly delivers 3 x 15 kW of total drive power while drawing a rated full-load current of 3 x 27.5 Amps. High-efficiency motor design maintains balanced electrical consumption and robust mechanical performance across varying commercial pressure demands.
Key Features
- Synchronized triple vertical multistage 8-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
- An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
- Heavy-duty Cast Iron GJL 250 pump casings paired with AISI 304 stainless steel stage chambers and impellers deliver exceptional structural rigidity.
- Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
- Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
- Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
- Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
- Standardized DN 150 Table E flanged connections manifold connections simplify mechanical alignment and expedite site pipework installation.
- Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
- Backed by a 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 65-3208 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 2200 L/Min |
| Max Head | 138 m |
| Power | 3 x 15 kW / 415v |
| Rated Current | 3 x 27.5 Amps |
| Suitable For | Large Scale Building Boosting |
| Body Material | Cast Iron |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 150 mm |
| Outlet Size | 150 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much vertical head elevation and internal pressure can this three-pump booster withstand?
Static elevation limits on the Calpeda BS3V 3MXV 65-3208-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) reach a maximum elevation head of 138 metres with a maximum casing pressure of 25 bar, moving clean fluids at temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Constructed with Cast iron GJL 250 pump casings, AISI 304 stage casings, and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3MXV 65-3208-ITT incorporates Hard Metal-Carbon-EPDM mechanical seals alongside DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Factory warranty provisions for the BS3V-3MXV-65-3208-ITT cover the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Rated for maximum volumetric throughput, the BS3V 3 MXV 65 3208 ITT yields up to 2200 L/min (132 m³/h) with all three pumps active, each supplying up to 733.3 L/min (44 m³/h) to maintain line pressure.
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Mains supply requirements for the 3MXV 65-3208-ITT specify Three Phase 400 V at 50 Hz to run three 15 kW (20 HP) motors totaling 45 kW under triple communicating I-MAT inverter control.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










