Roll over image to zoom
SKU: BS3V 3MXV 80-4803-ITT
Calpeda BS3V 3MXV 80-4803-ITT 3 x 7.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Consistent water delivery throughout commercial infrastructure prevents pressure loss during concurrent usage peaks. Engineered with 3 Calpeda MXV 80-4803 vertical multistage pumps in parallel, this variable-speed triplex package ensures pressure stability throughout hospitality resort facilities and multi-building guest accommodation loops. At peak consumption, the three-pump configuration produces a peak volumetric flow rate of 3000 L/Min to sustain commercial operations. Operating against closed pipework, the multistage wet ends produce a maximum shut-off head of 54 m for static elevation.
Proportional speed regulation is provided by a motor-mounted Calpeda I-MAT frequency converter engineered for multi-pump constant-pressure control. A digital pressure sensor mounted on the delivery manifold provides real-time signal feedback, prompting the inverter to trim motor velocity to match usage. Gradual acceleration and deceleration cycles isolate building pipework from rapid pressure transients, eliminating hydraulic hammer shocks. Comprehensive electronic protection automatically halts pump operation in the event of suction dry-run conditions, phase loss, or motor overcurrent.
High-strength Cast Iron GJL 250 hydraulic casings protect internal AISI 304 stainless steel stage assemblies and impellers from mechanical stresses. The triplex pumping units tie into rigid stainless steel distribution manifolds with 150 mm ports and DN 150 mm Table E flanged connections. Independent ball valves and check valves isolate each pumping circuit, supported by a line pressure gauge on a heavy-duty zinc-plated steel (S235JR) baseplate.
Three industrial 2-pole induction electric motors deliver continuous mechanical power from standard Australian three-phase 400 V (50 Hz) mains. Operating at a rated speed of 2900 rpm, the three drives deliver 3 x 7.5 kW of mechanical drive while drawing 3 x 14.3 Amps at rated full load. Heavy-duty motor construction and Class F electrical insulation maintain steady thermal performance across continuous operational duty cycles.
Key Features
- Parallel triplex arrangement of three Calpeda MXV 80-4803 3-stage vertical multistage pumps ensures dependable hydraulic delivery.
- Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
- Heavy-duty Cast Iron GJL 250 pump casings paired with AISI 304 stainless steel stage chambers and impellers deliver exceptional structural rigidity.
- Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
- Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
- Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
- Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
- Pre-assembled DN 150 mm Table E flanged connections distribution manifolds allow direct, streamlined site pipework connection.
- Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
- Backed by a 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 80-4803 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 3000 L/Min |
| Max Head | 54 m |
| Power | 3 x 7.5 kW / 415v |
| Rated Current | 3 x 14.3 Amps |
| Suitable For | Large Commercial Building Reticulation |
| Body Material | Cast Iron |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 150 mm |
| Outlet Size | 150 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Can you specify the pump metallurgy, mounting frame, and common inlet outlet connections?
Rigid skid-mounted assembly on the Calpeda BS3V 3MXV 80-4803-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) features Cast iron GJL 250 pump casings with AISI 304 stage casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 80-4803-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Operating in parallel duty assist mode, the BS3V-3MXV-80-4803-ITT reaches up to 3000 L/min (180 m³/h) across three pumps, with individual pump units delivering up to 1000 L/min (60 m³/h).
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 80 4803 ITT couples three 7.5 kW (10 HP) motors totaling 22.5 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Hydraulic pressure boundaries enable the 3MXV 80-4803-ITT to attain up to 54 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










