Calpeda BS3V 3MXV 80-4805-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 80-4805-ITT

Calpeda BS3V 3MXV 80-4805-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$86,234.45 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
3000 L/Min
Max Head
90 m
Power
3 x 15 kW / 415v
Ideal Use
Major Commercial Facility Boosting

Product Overview

Balancing pressure across commercial risers requires steady performance and rapid response to flow changes. This triplex booster installation couples 3 Calpeda MXV 80-4805 vertical multistage pumps on common headers to supply dependable pressure for metropolitan residential high-rises and vertical sanitary riser piping. Operating against closed delivery isolation valves, the multistage pump stacks develop a maximum shut-off head of 90 m for vertical elevation. During maximum concurrent consumption, the three-pump array delivers a peak volumetric flow rate of 3000 L/Min across the distribution line.

Continuous line pressure stability is maintained by an integrated motor-mounted Calpeda I-MAT frequency converter programmed for automated triplex duty-assist staging. The variable speed drive tracks line pressure via a digital pressure transducer and modulates operating speed in real time to match consumer draw-off. Controlled acceleration and deceleration ramp profiles prevent hydraulic shock, substantially eliminating pipework water hammer and extending system service life. Integrated electronic safety functions provide automatic shutdown protection against dry-running, motor overcurrent, and phase supply faults.

Engineered for heavy commercial service, the hydraulic assembly features robust Cast Iron GJL 250 pump casings paired with AISI 304 stainless steel intermediate stage chambers and impellers. The three pumping units connect into heavy-duty stainless steel manifolds featuring matching 150 mm suction and 150 mm delivery connections with DN 150 mm Table E flanged connections. Each pump line incorporates dedicated isolation ball valves and non-return check valves, alongside a delivery visual pressure gauge and heavy-duty zinc-plated steel (S235JR) structural baseplate.

Mechanical drive is delivered by three high-efficiency 2-pole induction electric motors engineered specifically for Australian three-phase 400 V (50 Hz) commercial electrical supplies. Operating smoothly at a rated speed of 2900 rpm, the three electric motors produce 3 x 15 kW of shaft power and draw a rated full-load current of 3 x 27.5 Amps. Precision motor engineering and Class F winding insulation ensure continuous thermal endurance and reliable energy conversion across demanding commercial operational cycles.

Key Features

  • Synchronized triple vertical multistage 5-stage hydraulic wet ends operate in parallel to produce smooth and balanced line pressure.
  • An integrated Calpeda I-MAT variable speed drive automatically adjusts motor frequency to deliver constant distribution pressure.
  • High-strength Cast Iron GJL 250 pump bodies with AISI 304 stainless steel internal wet ends provide maximum mechanical resistance.
  • Industrial IP55 weatherproof motor housings with Class F electrical winding insulation ensure reliable continuous plant room operation.
  • Designed to circulate clean, non-aggressive fluids across an operating temperature range of -15 °C to +110 °C.
  • Controlled acceleration and deceleration ramp profiles eliminate sudden pressure spikes and safeguard building pipework from water hammer.
  • Comprehensive electronic safety protocols automatically protect the assembly against dry operation, phase loss, and motor overloads.
  • Standardized DN 150 mm Table E flanged connections manifold connections simplify mechanical alignment and expedite site pipework installation.
  • Automated multi-pump orchestration cycles operating hours across all three pumps to equalize mechanical duty.
  • Supported by a 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 80-4805 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow3000 L/Min
Max Head90 m
Power3 x 15 kW / 415v
Rated Current3 x 27.5 Amps
Suitable ForMajor Commercial Facility Boosting
Body MaterialCast Iron
Liquid Temperature-15°C to +110°C
Inlet Size150 mm
Outlet Size150 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

Delivering a maximum flow rate of 3000 L/Min and reaching a maximum shut-off head of 90 m, the Calpeda BS3V 3MXV 80-4805-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter ensures uninterrupted water distribution across multi-storey residential apartment buildings. The triplex system features three Calpeda MXV vertical multistage pumps governed by motor-mounted I-MAT frequency inverters, automatically matching pump speeds to live user demand while soft-starting to eliminate pipe shudder. The factory-assembled skid is built on a heavy-duty structural baseplate with pre-plumbed dual 150 mm manifold connections, dedicated isolation valves, and an integrated membrane pressure vessel ready for immediate plant room connection.

  • Commercial Building Water Boosting
  • Multi-Storey Residential Water Supply
  • Potable Mains Pressure Maintenance
  • Plant Room Variable Speed Systems

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
What peak fluid throughput rate can this triple vertical multistage booster generate?

Collective fluid output on the Calpeda BS3V 3MXV 80-4805-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) delivers up to 3000 L/min (180 m³/h) across three pumps in parallel duty assist mode, with each vertical multistage pump supplying up to 1000 L/min (60 m³/h).

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Powered by Three Phase 400 V mains at 50 Hz, the BS3V 3MXV 80-4805-ITT drives three 15 kW (20 HP) motors totaling 45 kW governed by three communicating Calpeda I-MAT variable speed converters.

Under what maximum static head elevation and line pressure limits does this three-pump package operate?

Maximum static elevation on the BS3V-3MXV-80-4805-ITT achieves up to 90 metres while withstanding casing pressures up to 25 bar, rated for liquid temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Built with Cast iron GJL 250 pump casings, AISI 304 stage casings, and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3 MXV 80 4805 ITT includes Hard Metal-Carbon-EPDM mechanical seals with DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Equipment protection on the 3MXV 80-4805-ITT is backed by Calpeda manufacturer warranty terms guarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed