Roll over image to zoom
SKU: BS3V 3MXV 80-4806-ITT
Calpeda BS3V 3MXV 80-4806-ITT 3 x 15kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
High-occupancy commercial premises demand continuous water pressure across multi-level pipe networks. Powered by 3 Calpeda MXV 80-4806 vertical multistage pumps arranged in parallel, the Calpeda BS3V 3MXV 80-4806-ITT system provides balanced water flow across regional commercial complexes and municipal government office pipelines. At full facility draw, the triplex pumping set provides a maximum delivery capacity of 3000 L/Min to maintain fixture performance. Under static closed-line conditions, the vertical multistage design develops a maximum shut-off head of 108 m to overcome static delivery lift.
Automated pressure regulation is governed by a motor-mounted Calpeda I-MAT variable frequency converter operating the three pumps in coordinated duty-assist staging. Stepless speed modulation continuously matches rotational velocity to instantaneous line demand, maintaining constant pressure while maximizing electrical efficiency. Gradual acceleration ramps eliminate disruptive hydraulic surges, protecting building pipework and inline fittings from mechanical water hammer stresses. Comprehensive digital diagnostics incorporate automated shut-off protection to safeguard the pumping assembly against dry running, phase loss, and overcurrent conditions.
Heavy-duty Cast Iron GJL 250 pump bodies deliver exceptional structural strength, housing corrosion-resistant AISI 304 stainless steel impellers, stage chambers, and internal sleeves. Triple vertical pumps couple directly to rigid stainless steel headers with 150 mm suction and 150 mm discharge ports equipped with DN 150 mm Table E flanged connections. Individual isolation ball valves and non-return check valves protect each branch, supported by an analog line pressure gauge on an AISI 304 stainless steel mounting base.
Power is provided by three heavy-duty 2-pole induction motors designed for continuous operation on Australian three-phase 400 V (50 Hz) electrical distribution networks. Running synchronously at 2900 rpm, the electric drives generate 3 x 15 kW of mechanical output with a rated operational full-load current draw of 3 x 27.5 Amps. High-grade electrical laminations and Class F thermal insulation deliver long-term mechanical reliability across continuous commercial duty cycles.
Key Features
- Three Calpeda MXV 80-4806 vertical multistage 6-stage pumps configured on shared manifolds supply high-efficiency constant-pressure boosting.
- Continuous setpoint pressure is governed by an integrated motor-mounted Calpeda I-MAT variable frequency inverter.
- Heavy-duty Cast Iron GJL 250 pump casings paired with AISI 304 stainless steel stage chambers and impellers deliver exceptional structural rigidity.
- Heavy-duty electric motors are rated to IP55 ingress standards with Class F thermal insulation for continuous commercial duty.
- Verified operating limits safely circulate clean commercial liquids across a working temperature spectrum of -15 °C to +110 °C.
- Gradual soft-start and soft-stop acceleration ramps isolate distribution pipework from hydraulic water hammer shock.
- Built-in digital diagnostic monitoring delivers automatic safety cut-out protection in the event of dry-run or phase supply faults.
- Standardized DN 150 mm Table E flanged connections suction and discharge headers ensure straightforward plumbing integration into commercial risers.
- Integrated duty-assist sequencing evenly distributes operational hours across the three pump units to prevent uneven service wear.
- Protected by a 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 80-4806 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 3000 L/Min |
| Max Head | 108 m |
| Power | 3 x 15 kW / 415v |
| Rated Current | 3 x 27.5 Amps |
| Suitable For | Large Multi-Storey Water Supply |
| Body Material | Cast Iron |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 150 mm |
| Outlet Size | 150 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which electrical characteristics and mounted inverters govern this three-pump booster unit?
Mains power regulation on the Calpeda BS3V 3MXV 80-4806-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) utilizes Three Phase 400 V power at 50 Hz to drive three 15 kW (20 HP) motors totaling 45 kW, coordinated by three communicating Calpeda I-MAT inverters.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Developing up to 108 metres of maximum static head, the BS3V 3MXV 80-4806-ITT sustains internal casing pressures up to 25 bar across fluid operating temperatures from -15 °C to +110 °C.
What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?
Wetted construction on the BS3V-3MXV-80-4806-ITT combines Cast iron GJL 250 pump casings, AISI 304 stage casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, linked by DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Warranty protection supporting the BS3V 3 MXV 80 4806 ITT encompasses full Calpeda coverage for the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
To accommodate heavy site consumption, the 3MXV 80-4806-ITT provides up to 3000 L/min (180 m³/h) across three pumps under automated variable speed coordination, with each unit rated to 1000 L/min (60 m³/h).
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










