Calpeda BS3V 3MXV 80-4807-ITT 3 x 18.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter
SKU: BS3V 3MXV 80-4807-ITT

Calpeda BS3V 3MXV 80-4807-ITT 3 x 18.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter

$93,703.06 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
3000 L/Min
Max Head
126 m
Power
3 x 18.5 kW / 415v
Ideal Use
Heavy Commercial Water Boosting

Product Overview

Multi-floor sanitary systems require intelligent staging to maintain steady line pressure across wide demand variations. This variable-speed triplex booster system couples 3 Calpeda MXV 80-4807 vertical multistage pumps on shared manifolds to service educational research facilities and campus teaching building networks. Under closed-valve conditions, the multi-impeller pump stacks achieve a maximum shut-off head of 126 m to supply elevated pipework. When building draw peaks, the parallel pumping configuration provides a maximum volumetric flow rate of 3000 L/Min across distribution outlets.

Precise setpoint pressure is sustained across fluctuating facility draw through an integrated motor-mounted Calpeda I-MAT variable frequency converter. An electronic pressure transducer continuously feeds line data to the integrated controller, modulating pump speed to deliver exact flow requirements without pressure spikes. Smooth soft-start and soft-stop ramp profiles protect building distribution pipework from mechanical water hammer and sudden pressure waves. Built-in electronic monitoring systems deliver automatic safety shutdown protection in the event of dry-run conditions, electrical phase imbalance, or motor overload.

Constructed with Cast Iron GJL 250 hydraulic casings and AISI 304 stainless steel wet ends, the pumps deliver outstanding mechanical durability under continuous high-pressure service. Hydraulic flow distributes through common stainless steel manifolds with standardized 150 mm suction and 150 mm delivery fittings with DN 150 mm Table E flanged connections. Independent isolation valves and check valves service each pump run, mounted alongside an analog delivery pressure gauge upon an AISI 304 stainless steel baseplate frame.

Synchronous mechanical output is supplied by three 2-pole commercial induction motors matched to Australian three-phase 400 V (50 Hz) power standards. Rotating at a nominal operating speed of 2900 rpm, the three-motor assembly delivers 3 x 18.5 kW of total drive power while drawing a rated full-load current of 3 x 34 Amps. High-efficiency motor design maintains balanced electrical consumption and robust mechanical performance across varying commercial pressure demands.

Key Features

  • Parallel triplex arrangement of three Calpeda MXV 80-4807 7-stage vertical multistage pumps ensures dependable hydraulic delivery.
  • Integrated Calpeda I-MAT frequency converter provides automated stepless speed regulation to sustain constant delivery pressure.
  • Cast Iron GJL 250 external housings encasing AISI 304 stainless steel impellers and stages ensure robust commercial durability.
  • Weatherproof electric motor enclosures are sealed to IP55 standards with Class F thermal winding insulation for demanding plant room environments.
  • Engineered hydraulic wet ends safely handle fluid temperatures spanning from -15 °C up to +110 °C.
  • Programmed acceleration ramp profiles eliminate line pressure surges to protect plumbing fixtures and backflow preventers.
  • Embedded electronic safety safeguards automatically halt operation during low-water suction conditions, overcurrent, or supply faults.
  • Pre-assembled DN 150 mm Table E flanged connections distribution manifolds allow direct, streamlined site pipework connection.
  • Automated duty-assist rotation equalizes operating run hours across all three pumps to prevent uneven component wear.
  • Backed by a comprehensive 24-month manufacturer warranty.

What's Included

  • 3 x Calpeda MXV 80-4807 vertical multistage pumps
  • 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
  • 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
  • 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
  • 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
  • 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
Max Flow3000 L/Min
Max Head126 m
Power3 x 18.5 kW / 415v
Rated Current3 x 34 Amps
Suitable ForHeavy Commercial Water Boosting
Body MaterialCast Iron
Liquid Temperature-15°C to +110°C
Inlet Size150 mm
Outlet Size150 mm
Warranty24 Months
Documents
Product Brochure Download
Specification Data Sheet Download
Operating Instructions Download
I-MAT Operating Instructions Download
Spare Parts Exploded View Download

For multi-level commercial developments where plumbing pressure drops cause fixture starvation, the Calpeda BS3V 3MXV 80-4807-ITT 3 x 18.5kW Variable Speed Triple Pump Booster Set with I-MAT Converter provides continuous, automated line pressure regulation. Driven by three vertical multistage pumps with integrated Calpeda I-MAT variable speed drives, the package achieves a maximum volumetric flow rate of 3000 L/Min and develops a maximum shut-off head of 126 m, arriving complete with pre-tested dual 150 mm header manifolds, full-port isolation valves, and an integrated membrane buffer vessel for fast mechanical hookup.

  • High-Rise Potable Water Reticulation
  • Multi-Storey Building Water Supply
  • Variable Speed Pressure Systems
  • Commercial Plumbing Riser Supply

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Specification Data Sheet
Download
Operating Instructions
Download
I-MAT Operating Instructions
Download
Spare Parts Exploded View
Download
Which vertical lift limits and casing pressure tolerances apply to this triple booster?

System head limits on the Calpeda BS3V 3MXV 80-4807-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) reach a maximum elevation head of 126 metres with a maximum casing pressure of 25 bar, moving clean fluids at temperatures from -15 °C to +110 °C.

What corrosion proof wetted metallurgy and common manifold connection sizes are incorporated?

Constructed with Cast iron GJL 250 pump casings, AISI 304 stage casings, and AISI 304 stainless steel impellers on a Zinc-plated Steel S235JR Baseplate, the BS3V 3MXV 80-4807-ITT incorporates Hard Metal-Carbon-EPDM mechanical seals alongside DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.

What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?

Factory warranty provisions for the BS3V-3MXV-80-4807-ITT cover the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.

What peak water discharge rate and maximum parallel flow capacity does this triple package supply?

Rated for maximum volumetric throughput, the BS3V 3 MXV 80 4807 ITT yields up to 3000 L/min (180 m³/h) with all three pumps active, each supplying up to 1000 L/min (60 m³/h) to maintain line pressure.

Which electrical power mains and triple variable speed frequency converters regulate this booster set?

Mains supply requirements for the 3MXV 80-4807-ITT specify Three Phase 400 V at 50 Hz to run three 18.5 kW (25 HP) motors totaling 55.5 kW under triple communicating I-MAT inverter control.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed