Roll over image to zoom
SKU: BS3V 3MXV 80-4808-ITT
Calpeda BS3V 3MXV 80-4808-ITT 3 x 22kW Variable Speed Triple Pump Booster Set with I-MAT Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Reliable line pressure management across commercial networks protects sanitary fixtures from pressure fluctuations. The Calpeda BS3V 3MXV 80-4808-ITT booster system operates 3 Calpeda MXV 80-4808 vertical multistage pumps in parallel to ensure uniform pressure across high-occupancy commercial towers and continuous-duty building service mains. During peak simultaneous fixture demand, the three-pump assembly delivers a maximum flow rate of 3000 L/Min at minimal line head. Working against closed valves, the multistage hydraulic wet ends generate a maximum static delivery head of 144 m for elevation.
System line pressure is dynamically stabilized by an integrated motor-mounted Calpeda I-MAT frequency converter working in synchronized triplex pump orchestration. A high-precision digital transducer measures header pressure continuously, allowing the inverter to vary impeller velocity in direct response to consumer draw. Engineered acceleration ramps eliminate hydraulic water hammer, reducing physical stress on pipe joints, valves, and building plumbing infrastructure. The onboard control architecture includes comprehensive digital fault detection, automatically stopping the pumps during dry-run, power supply, or thermal overload events.
High mechanical endurance is achieved through Cast Iron GJL 250 pump casings encasing AISI 304 stainless steel intermediate stages, impellers, and drive shafts. The three commercial pumps connect into heavy-duty headers providing standardized 150 mm suction and 150 mm discharge manifolds with DN 150 mm Table E flanged connections. Dedicated isolation ball valves and inline non-return check valves protect each line, supported on an AISI 304 stainless steel structural mounting skid.
Electric propulsion is delivered via three 2-pole asynchronous induction motors built strictly for standard Australian commercial three-phase 400 V (50 Hz) power supplies. Operating at 2900 rpm, the triple-motor assembly provides 3 x 22 kW of mechanical shaft energy and absorbs a rated full-load current of 3 x 40.5 Amps. Heavy-duty stator windings with Class F thermal insulation ensure dependable mechanical longevity under continuous plant room commercial operation.
Key Features
- Triplex vertical multistage configuration with three Calpeda MXV 80-4808 8-stage pumps maintains continuous line pressure stability.
- Motor-mounted Calpeda I-MAT frequency converter continuously modulates operating speed to maintain target line pressure.
- High-strength Cast Iron GJL 250 pump bodies with AISI 304 stainless steel internal wet ends provide maximum mechanical resistance.
- Totally enclosed fan-cooled electric motors feature IP55 ingress protection and Class F thermal insulation for harsh commercial duties.
- Thermal operating envelope safely accommodates clean liquid media ranging from -15 °C to +110 °C.
- Controlled motor ramping curves prevent abrupt pressure spikes and protect building distribution lines from hydraulic shock.
- Integrated digital safety electronics provide automated shutdown protection against dry-running, motor overcurrent, and electrical supply faults.
- Common stainless steel manifolds with DN 150 mm Table E flanged connections fittings ensure rigid mechanical alignment and easy installation.
- Coordinated duty-assist staging balances operational run hours across the three pumps for uniform long-term component wear.
- Covered by a standard 24-month manufacturer warranty.
What's Included
- 3 x Calpeda MXV 80-4808 vertical multistage pumps
- 3 x Motor-mounted Calpeda I-MAT variable frequency converters with motor adapters and interconnect cabling
- 1 x Factory-mounted 18 L membrane pressure vessel on delivery manifold
- 1 x AISI 304 stainless steel suction manifold with individual isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with individual isolation ball valves and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the I-MAT inverter system
- 1 x Heavy-duty zinc-plated structural steel (S235JR) mounting baseplate
SPECIFICATIONS
| Max Flow | 3000 L/Min |
| Max Head | 144 m |
| Power | 3 x 22 kW / 415v |
| Rated Current | 3 x 40.5 Amps |
| Suitable For | Commercial Building Pressure Boosting |
| Body Material | Cast Iron |
| Liquid Temperature | -15°C to +110°C |
| Inlet Size | 150 mm |
| Outlet Size | 150 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which common manifold pipework dimensions and wetted construction materials are incorporated?
Integrated manifold piping on the Calpeda BS3V 3MXV 80-4808-ITT Variable Speed Booster Set with I-MAT (Three Phase 400V) features Cast iron GJL 250 pump casings with AISI 304 stage casings, AISI 304 stainless steel impellers, and Hard Metal-Carbon-EPDM mechanical seals seated on a Zinc-plated Steel S235JR Baseplate, fitted with DN 125 Flanged suction and DN 125 Flanged delivery common manifolds.
What manufacturer warranty protection coverage supports this triple variable speed pumping assembly?
Comprehensive Calpeda manufacturer warranty coverage protects the BS3V 3MXV 80-4808-ITT, safeguarding the three vertical multistage pump wet ends, triple electric motors, and three electronic inverter consoles against manufacturing defects from date of invoice.
What peak water discharge rate and maximum parallel flow capacity does this triple package supply?
Operating in parallel duty assist mode, the BS3V-3MXV-80-4808-ITT reaches up to 3000 L/min (180 m³/h) across three pumps, with individual pump units delivering up to 1000 L/min (60 m³/h).
Which electrical power mains and triple variable speed frequency converters regulate this booster set?
Configured for Three Phase 400 V, 50 Hz infrastructure, the BS3V 3 MXV 80 4808 ITT couples three 22 kW (30 HP) motors totaling 66 kW with three communicating Calpeda I-MAT frequency inverters for synchronized duty assist regulation.
Under what maximum static head elevation and line pressure limits does this three-pump package operate?
Hydraulic pressure boundaries enable the 3MXV 80-4808-ITT to attain up to 144 metres of static lift and withstand 25 bar casing pressure limits at temperatures from -15 °C to +110 °C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










