Roll over image to zoom
SKU: BSM1V 1MXV 25-312-EMT
Calpeda BSM1V 1MXV 25-312-EMT 2.2kW Variable Speed Single Pump Booster Set with EasyMat Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Urban commercial buildings require whisper-quiet and energy-efficient water pressure stabilization across all riser zones. The Calpeda BSM1V 1MXV 25-312-EMT 2.2kW Variable Speed Single Pump Booster Set with EasyMat Converter combines an efficient Calpeda MXV vertical multistage pump with an integrated pipe-mounted EasyMat variable frequency converter. Operating against closed valves, the hydraulic wet end generates a maximum shut-off head of 127 m. When line fixtures open across the facility, the package delivers a maximum flow rate of 75 L/Min at minimal discharge head. Constructed with AISI 304 stainless steel stage chambers and impellers, the assembly ensures long-term corrosion resistance in demanding potable water environments.
System line pressure is governed by an integrated Calpeda EasyMat variable frequency converter installed directly on the pump delivery pipe. Powered by a standard Australian single-phase 240 V (50 Hz) electrical supply, the water-cooled inverter converts mains power to drive the 240 V three-phase motor with high electrical efficiency. As plumbing fixtures open and close, the inverter continuously measures line pressure via a built-in transducer and modulates motor speed to hold delivery pressure rock-steady. Smooth acceleration and deceleration ramps eliminate hydraulic water hammer, reducing physical stress on risers, joints, and sanitary fixtures.
The factory-assembled booster unit is engineered for rapid plant room installation and straightforward mechanical alignment. Built on a heavy-duty galvanised steel structural mounting baseplate, the system features pre-plumbed 25 mm suction and 25 mm delivery pipe connections with full-flow isolation ball valves and an integrated non-return check valve. An 18 L cylindrical membrane pressure vessel mounted on the discharge line cushions against thermal expansion and absorbs micro-leaks, preventing frequent motor cycling during minor off-peak draws.
Comprehensive onboard digital protection protocols defend the mechanical assembly against adverse site operating conditions. The EasyMat converter continuously monitors system variables and triggers automated safety shutdown upon detecting dry-run conditions, overcurrent draw, abnormal line pressure, or power supply anomalies. Visual pressure readouts and operational indicators allow plant room operators to verify live operating status at a glance, delivering dependable, maintenance-friendly pressure reticulation across commercial facilities.
Key Features
- Vertical multistage hydraulic architecture delivers smooth and balanced pressure accumulation across AISI 304 stainless steel intermediate stages.
- An integrated pipe-mounted Calpeda EasyMat variable frequency converter continuously modulates motor rpm to maintain constant line pressure.
- Powered by a standard Australian single-phase 240 V (50 Hz) electrical supply converting to efficient 240 V three-phase motor operation.
- Heavy-duty AISI 304 stainless steel pump casing, intermediate stage chambers, and impellers provide superior corrosion resistance.
- Weatherproof motor enclosure is sealed to IP55 ingress protection standards with Class F thermal insulation for plant room environments.
- Verified operating parameters safely accommodate clean potable water circulation across an operating temperature range of 0 °C to +40 °C.
- Controlled electronic acceleration ramp profiles prevent abrupt pressure spikes and eliminate pipework water hammer.
- Pre-plumbed 25 mm suction and 25 mm delivery connections with isolation ball valves ensure straightforward mechanical site plumbing.
- Backed by a 24-month manufacturer warranty.
What's Included
- 1 x Calpeda MXV 25-312 vertical multistage pump
- 1 x Pipe-mounted Calpeda EasyMat variable frequency converter
- 1 x Factory-mounted 18 L cylindrical membrane pressure vessel on delivery header
- 1 x AISI 304 stainless steel suction line with isolation ball valve and non-return valve
- 1 x AISI 304 stainless steel delivery line with isolation ball valve and visual pressure gauge
- 1 x Digital electronic pressure transducer pre-wired to the EasyMat converter
- 1 x Heavy-duty galvanised steel structural mounting baseplate
- 1 x Integrated liquid-cooled converter heatsink housing
SPECIFICATIONS
| Max Flow | 75 L/Min |
| Max Head | 127 m |
| Power | 2.2 kW / 240v |
| Rated Current | 9.2 Amps |
| Suitable For | Commercial Riser Water Reticulation |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | 0 °C to +40 °C |
| Inlet Size | 25 mm |
| Outlet Size | 25 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What mains voltage supply and electronic frequency drive manage the pump motor?
Electrical power regulation on the Calpeda BSM1V 1MXV 25-312 O-EMT Variable Speed Booster Set with EASYMAT utilizes Single Phase 230 V 50 Hz mains to run a 2.2 kW P2 electric motor drawing 9.2 A at Three Phase 230 V, regulated by one pipe-mounted Calpeda EASYMAT 9.2MT variable frequency converter on the delivery pipe.
Which vertical head range at stated flow rates and working pressure limits are rated for this set?
Across verified elevation levels, BSM1V 1MXV 25-312 O-EMT delivers an operating head range from 127 metres at 16.6 L/min down to 50 metres at 75 L/min, with a shut-off head of 136 metres at zero flow, rated for casing pressure up to 25 bar, oval-flange connections up to 16 bar, and booster set working pressure up to 10 bar and clean liquid temperatures from 0 °C to +40 °C.
What wetted materials and pipe connection sizes equip this booster set?
Wetted build on BSM1V-1MXV-25-312-O-EMT combines AISI 304 stainless steel stages, Hard Metal-Carbon-EPDM seals, Ceramic alumina bearings, and a galvanised steel baseplate with G 1" BSP suction and G 1" BSP delivery pipe connections.
How are equipment defects covered under the official Calpeda manufacturer warranty?
Covered by official manufacturer terms, BSM1V 1MXV 25 312 O-EMT includes Calpeda UK EASYMAT warranty protection for 2 years from installation or 30 months from dispatch, whichever is shorter, providing parts and labour support against factory faults.
How many litres per minute of maximum water delivery can this unit achieve?
To satisfy variable facility draw, the 1MXV 25-312 O-EMT pump assembly modulates output up to 75 L/min under responsive inverter control.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










