Roll over image to zoom
SKU: BSM1V 1NG 7/16-EMT
Calpeda BSM1V 1NG 7/16-EMT 2.2kW Variable Speed Single Pump Multistage Booster Set with EasyMat Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Where steep vertical lifts or high-pressure process lines demand concentrated hydraulic force at moderate volumes, the Calpeda BSM1V 1NG 7/16-EMT single-pump booster excels. Centred around one high-head Calpeda NG 7/16 horizontal multistage pump, this compact variable-speed station can develop up to 89 m of head for steep vertical lifts. During peak fixture demand, the unit supplies flow rates up to 66.7 L/Min. It is ideally suited to tall residential towers, specialised washdown circuits, and pressurised industrial water feeds.
Precise pressure stability is achieved through an integrated I-MAT frequency converter mounted directly on the pump assembly. By continuously reading downstream line pressure, the inverter modulates motor rotational speed in real time to maintain a constant setpoint regardless of fluctuating draw-off rates. This variable-speed operation slashes electrical consumption during partial-load periods, softens hydraulic starts and stops to eliminate water hammer, and provides comprehensive electronic protection against dry running and overload.
Hydraulic distribution across the unit is built around durable AISI 304 stainless steel suction and delivery manifolds designed for long-term cleanliness. The pipework features a 40 mm inlet header feeding the pump and a 25 mm outlet manifold equipped with a dedicated port for an external expansion vessel. Factory-fitted isolation ball valves, a spring-loaded non-return valve, and an easy-to-read pressure gauge allow straightforward commissioning and routine inspection.
Convenient electrical integration is a standout advantage, as the inverter accepts a standard single-phase 230 V incoming supply and converts it to drive the three-phase 230/400 V motor windings. The 2-pole induction motor is rated at 2.2 kW (P2) and operates up to 2900 rpm on a 50 Hz basis. Built in compliance with IEC 60034 engineering standards and protected by Class F winding insulation, the drive unit delivers dependable thermal endurance.
Key Features
- Extreme High-Head Architecture: Employs a precision 16-stage hydraulic assembly to generate substantial delivery pressure for tall risers and long pipe runs.
- Onboard I-MAT Inverter Drive: Dynamically adjusts pump speed to hold constant manifold pressure while tracking energy metrics and operational parameters.
- Single-to-Three-Phase Conversion: Allows a three-phase industrial motor to run smoothly from a standard single-phase power circuit.
- Corrosion-Proof AISI 304 Headers: Stainless steel suction and discharge manifolds safeguard water purity and resist aggressive thermal conditions.
- Extended Thermal Range: Capable of handling cold and high-temperature fluids ranging from -15 °C to +110 °C without performance degradation.
- Industrial Motor Construction: Features Class F thermal winding insulation and IEC 60034 compliant design for sustained continuous duty.
- Full Service Valve Set: Supplied with suction and discharge isolation ball valves plus a non-return check valve to prevent backflow.
- Backed for Peace of Mind: Arrives factory assembled, pressure tested, and supported by a 24 Months warranty.
What's Included
- 1 x Calpeda NG 7/16 horizontal multistage pump
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Integrated I-MAT frequency converters mounted on each pump
- System pressure gauge
- Factory assembled and tested boosting plant
SPECIFICATIONS
| Max Flow | 67 L/Min |
| Max Head | 89 m |
| Power | 2.2 kW / 415v |
| Rated Current | 5.3 Amps |
| Suitable For | Commercial & Residential Water Supply |
| Body Material | Cast Iron |
| Liquid Temperature | -15 °C to +110 °C |
| Inlet Size | 40 mm |
| Outlet Size | 25 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What peak water discharge volume can this single pump variable speed jet booster provide?
Supplying clean water across an efficient jet hydraulic curve, the Calpeda Variable Speed Booster Set BSM1V 1NG 7/16-EMT discharges up to 66.7 L/min (4 m³/h) for remote domestic risers.
Which electrical power mains and variable speed frequency converter regulate this booster set?
Electrical connection for the BSM1V 1NG 7/16-EMT requires standard 230V single phase power at 50 Hz, driving a 2.2 kW motor regulated by an EASYMAT variable speed frequency converter (230V).
Under what maximum static head elevation and line pressure limits does this package operate?
Total static head on the BSM1V-1NG-7/16-EMT reaches up to 89 metres, while pump casings withstand up to 10 bar across liquid temperatures up to +40°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
Fitted with a Cast Iron GJL 200 body and brass impeller, the BSM1V 1 NG 7/16-EMT is secured to an AISI 304 Stainless Steel Baseplate and incorporates G 1 1/2" BSP suction and G 1" BSP discharge connections.
What manufacturer warranty protection coverage supports this variable speed pumping assembly?
All core pumping elements of the 1NG 7/16-EMT (BSM1V 1NG 7/16-EMT), including the jet pump wet end, electric motor, and electronic frequency converter, are covered by Calpeda manufacturer warranty from date of invoice.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us