Calpeda BSM2V 2MXV 32-504-EMT 2 x 1.1kW Variable Speed Twin Pump Booster Set with EasyMat Converter
SKU: BSM2V 2MXV 32-504-EMT

Calpeda BSM2V 2MXV 32-504-EMT 2 x 1.1kW Variable Speed Twin Pump Booster Set with EasyMat Converter

$16,571.50 GST Included
FREE shipping on orders over $100 Australia-wide*
Fast Dispatch
Australia-Wide
Expert Advice
(08) 9240 2992
Genuine
Official Calpeda
24 Months
Peace of Mind
Max Flow
266 L/Min
Max Head
41.5 m
Power
2 x 1.1 kW / 240v
Ideal Use
Commercial Facility Water Boosting

Product Overview

Multi-storey residential apartment buildings require dedicated riser pressure boosting to eliminate pressure drops during morning peak hours. The Calpeda BSM2V 2MXV 32-504-EMT 2 x 1.1kW Variable Speed Twin Pump Booster Set with EasyMat Converter combines dual Calpeda MXV vertical multistage pumps with synchronized pipe-mounted EasyMat variable frequency converters. Operating against closed valves, the hydraulic wet ends generate a maximum shut-off head of 41.5 m. When line fixtures open across the facility, the twin-pump assembly delivers a combined maximum flow rate of 266 L/Min at minimal discharge head. Constructed with AISI 304 stainless steel stage chambers and impellers, the assembly ensures long-term corrosion resistance in demanding potable water environments.

System line pressure is governed by integrated Calpeda EasyMat variable frequency converters installed directly on each pump delivery pipe. Powered by standard Australian single-phase 240 V (50 Hz) electrical supplies, the water-cooled inverters convert mains power to drive the 240 V three-phase motors with high electrical efficiency. The communicating inverters dynamically stage the 2 pumps in duty and assist configurations while alternating lead pump duties to equalize operating hours. Smooth acceleration and deceleration ramps eliminate hydraulic water hammer, reducing physical stress on risers, joints, and sanitary fixtures.

The factory-assembled booster station is engineered for rapid plant room installation and straightforward mechanical alignment. Built on a heavy-duty galvanised steel structural mounting baseplate, the system features pre-plumbed dual 50 mm suction and 50 mm delivery stainless steel manifolds with dedicated isolation ball valves and check valves on each pump branch. An 18 L cylindrical membrane pressure vessel mounted on the discharge header cushions against thermal expansion and absorbs micro-leaks, preventing frequent motor cycling during minor off-peak draws.

Comprehensive onboard digital protection protocols defend the mechanical assembly against adverse site operating conditions. The EasyMat converter continuously monitors system variables and triggers automated safety shutdown upon detecting dry-run conditions, overcurrent draw, abnormal line pressure, or power supply anomalies. Visual pressure readouts and operational indicators allow plant room operators to verify live operating status at a glance, delivering dependable, maintenance-friendly pressure reticulation across commercial facilities.

Key Features

  • Parallel vertical multistage hydraulic architecture delivers high combined volumetric capacity with balanced pressure accumulation across intermediate stages.
  • Integrated pipe-mounted Calpeda EasyMat variable frequency converters continuously modulate motor rpm to maintain constant line pressure across fluctuating demand.
  • Powered by standard Australian single-phase 240 V (50 Hz) electrical supplies converting to efficient 240 V three-phase motor operation.
  • Automated inverter communication alternates duty lead sequencing to equalize pump wear and brings assist pumps online smoothly during peak consumption.
  • Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers provide superior corrosion resistance.
  • Weatherproof motor enclosures are sealed to IP55 ingress protection standards with Class F thermal insulation for plant room environments.
  • Verified operating parameters safely accommodate clean potable water circulation across an operating temperature range of 0 °C to +40 °C.
  • Pre-tested dual 50 mm suction and 50 mm delivery stainless steel manifolds with dedicated isolation valves ensure straightforward mechanical site plumbing.
  • Backed by a 24-month manufacturer warranty.

What's Included

  • 2 x Calpeda MXV 32-504 vertical multistage pumps
  • 2 x Pipe-mounted Calpeda EasyMat variable frequency converters
  • 1 x Factory-mounted 18 L cylindrical membrane pressure vessel on delivery header
  • 1 x AISI 304 stainless steel suction manifold with dedicated isolation ball valves and non-return valves
  • 1 x AISI 304 stainless steel delivery manifold with dedicated isolation ball valves and visual pressure gauge
  • 2 x Digital electronic pressure transducers pre-wired to the EasyMat converters
  • 1 x Heavy-duty galvanised steel structural mounting baseplate
  • 2 x Integrated liquid-cooled converter heatsink housings
SPECIFICATIONS
Max Flow266 L/Min
Max Head41.5 m
Power2 x 1.1 kW / 240v
Rated Current2 x 4.6 Amps
Suitable ForCommercial Facility Water Boosting
Body Material304 Stainless Steel
Liquid Temperature0 °C to +40 °C
Inlet Size50 mm
Outlet Size50 mm
Warranty24 Months
Documents
Product Brochure Download
Operating Instructions Download
EasyMAT Operating Instructions Download
Spare Parts Exploded View Download

Multi-storey residential apartment buildings require dedicated riser pressure boosting to eliminate pressure drops during morning peak hours. A smart pressure transducer governs the Calpeda BSM2V 2MXV 32-504-EMT, so commercial facility water boosting sees a constant outlet even as draw swings from night trickle to 266 L/Min peak.

  • Greenhouse Water Reticulation
  • Water Cart Fill Points
  • Construction Site Water Supply
  • Fire Sprinkler Makeup Water

Warranty & Returns

All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.

  • Products must be installed correctly and in accordance with the manufacturer’s instructions.
  • Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
  • Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
  • The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
  • Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
  • Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
  • Customers are responsible for return freight costs for change-of-mind returns.
  • Restocking fees may apply to special-order, bulky or non-stocked products.
  • Used, installed or specially ordered products may not be eligible for change-of-mind returns.
  • If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.

Your rights under Australian Consumer Law are not affected.

Product Brochure
Download
Operating Instructions
Download
EasyMAT Operating Instructions
Download
Spare Parts Exploded View
Download
What official manufacturer warranty safeguards this vertical boosting assembly?

Standard warranty provisions for the Calpeda BSM2V 2MXV 32-504 O-EMT Variable Speed Booster Set with EASYMAT provide official Calpeda UK EASYMAT warranty coverage for 2 years from installation or 30 months from dispatch, whichever is shorter, covering factory defects for parts and labour, excluding removal or secondary losses, when installed per manufacturer guidelines.

How many litres per minute of maximum water delivery can this unit achieve?

During peak demand, BSM2V 2MXV 32-504 O-EMT supplies up to 266.6 L/min across two pumps in parallel assist mode, sharing flow equally between both units.

Under what electrical mains voltage does this variable speed system function?

Electrical supply for BSM2V-2MXV-32-504-O-EMT requires Single Phase 230 V at 50 Hz, operating twin 1.1 kW P2 electric motors totaling 2.2 kW P2 drawing 4.7 A per pump at Three Phase 230 V under twin communicating pipe-mounted Calpeda EASYMAT 9.2MT variable frequency converters on the delivery line.

What operating head range at stated flows and casing pressure thresholds govern this unit?

Within multi-floor distribution pipework, BSM2V 2MXV 32 504 O-EMT provides an operating head range from 41.5 metres at 25 L/min down to 14.5 metres at 266.6 L/min, with a shut-off head of 45 metres at zero flow, rated for casing pressure up to 25 bar, oval-flange connections up to 16 bar, and booster set working pressure up to 10 bar and clean liquid temperatures from 0 °C to +40 °C.

Which stainless steel grades and port fittings are incorporated across this unit?

Physical engineering across the 2MXV 32-504 O-EMT pump assembly unites AISI 304 stainless steel wet ends, Hard Metal-Carbon-EPDM seals, Ceramic alumina bearings, and G 2" BSP suction and G 2" BSP delivery common manifolds.

Need help choosing the right pump?

Our team of pump experts are here to help you find the perfect solution for your application.

  • Free expert advice
  • Pump sizing & system recommendations
  • Fast response — call or email us

Recently viewed