Roll over image to zoom
SKU: BSM2V 2MXV 32-506-EMT
Calpeda BSM2V 2MXV 32-506-EMT 2 x 1.5kW Variable Speed Twin Pump Booster Set with EasyMat Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Commercial plumbing infrastructure demands heavy-duty stainless steel booster sets built for continuous duty in demanding environments. The Calpeda BSM2V 2MXV 32-506-EMT 2 x 1.5kW Variable Speed Twin Pump Booster Set with EasyMat Converter combines dual Calpeda MXV vertical multistage pumps with synchronized pipe-mounted EasyMat variable frequency converters. Operating against closed valves, the hydraulic wet ends generate a maximum shut-off head of 62 m. When line fixtures open across the facility, the twin-pump assembly delivers a combined maximum flow rate of 266 L/Min at minimal discharge head. Constructed with AISI 304 stainless steel stage chambers and impellers, the assembly ensures long-term corrosion resistance in demanding potable water environments.
System line pressure is governed by integrated Calpeda EasyMat variable frequency converters installed directly on each pump delivery pipe. Powered by standard Australian single-phase 240 V (50 Hz) electrical supplies, the water-cooled inverters convert mains power to drive the 240 V three-phase motors with high electrical efficiency. The communicating inverters dynamically stage the 2 pumps in duty and assist configurations while alternating lead pump duties to equalize operating hours. Smooth acceleration and deceleration ramps eliminate hydraulic water hammer, reducing physical stress on risers, joints, and sanitary fixtures.
The factory-assembled booster station is engineered for rapid plant room installation and straightforward mechanical alignment. Built on a heavy-duty galvanised steel structural mounting baseplate, the system features pre-plumbed dual 50 mm suction and 50 mm delivery stainless steel manifolds with dedicated isolation ball valves and check valves on each pump branch. An 18 L cylindrical membrane pressure vessel mounted on the discharge header cushions against thermal expansion and absorbs micro-leaks, preventing frequent motor cycling during minor off-peak draws.
Comprehensive onboard digital protection protocols defend the mechanical assembly against adverse site operating conditions. The EasyMat converter continuously monitors system variables and triggers automated safety shutdown upon detecting dry-run conditions, overcurrent draw, abnormal line pressure, or power supply anomalies. Visual pressure readouts and operational indicators allow plant room operators to verify live operating status at a glance, delivering dependable, maintenance-friendly pressure reticulation across commercial facilities.
Key Features
- Parallel vertical multistage hydraulic architecture delivers high combined volumetric capacity with balanced pressure accumulation across intermediate stages.
- Integrated pipe-mounted Calpeda EasyMat variable frequency converters continuously modulate motor rpm to maintain constant line pressure across fluctuating demand.
- Powered by standard Australian single-phase 240 V (50 Hz) electrical supplies converting to efficient 240 V three-phase motor operation.
- Automated inverter communication alternates duty lead sequencing to equalize pump wear and brings assist pumps online smoothly during peak consumption.
- Heavy-duty AISI 304 stainless steel pump casings, intermediate stage chambers, and impellers provide superior corrosion resistance.
- Weatherproof motor enclosures are sealed to IP55 ingress protection standards with Class F thermal insulation for plant room environments.
- Verified operating parameters safely accommodate clean potable water circulation across an operating temperature range of 0 °C to +40 °C.
- Pre-tested dual 50 mm suction and 50 mm delivery stainless steel manifolds with dedicated isolation valves ensure straightforward mechanical site plumbing.
- Backed by a 24-month manufacturer warranty.
What's Included
- 2 x Calpeda MXV 32-506 vertical multistage pumps
- 2 x Pipe-mounted Calpeda EasyMat variable frequency converters
- 1 x Factory-mounted 18 L cylindrical membrane pressure vessel on delivery header
- 1 x AISI 304 stainless steel suction manifold with dedicated isolation ball valves and non-return valves
- 1 x AISI 304 stainless steel delivery manifold with dedicated isolation ball valves and visual pressure gauge
- 2 x Digital electronic pressure transducers pre-wired to the EasyMat converters
- 1 x Heavy-duty galvanised steel structural mounting baseplate
- 2 x Integrated liquid-cooled converter heatsink housings
SPECIFICATIONS
| Max Flow | 266 L/Min |
| Max Head | 62 m |
| Power | 2 x 1.5 kW / 240v |
| Rated Current | 2 x 7.5 Amps |
| Suitable For | Commercial Complex Water Boosting |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | 0 °C to +40 °C |
| Inlet Size | 50 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How does the integrated variable speed drive control the electric motor speed?
Automated speed regulation on the Calpeda BSM2V 2MXV 32-506 O-EMT Variable Speed Booster Set with EASYMAT utilizes Single Phase 230 V 50 Hz mains to run twin 1.5 kW P2 electric motors totaling 3 kW P2 drawing 7.5 A per pump at Three Phase 230 V, regulated by twin communicating pipe-mounted Calpeda EASYMAT 9.2MT variable frequency converters on the delivery line.
What operating head range at stated flows and casing pressure thresholds govern this unit?
Across verified elevation levels, BSM2V 2MXV 32-506 O-EMT delivers an operating head range from 62 metres at 25 L/min down to 22 metres at 266.6 L/min, with a shut-off head of 68 metres at zero flow, rated for casing pressure up to 25 bar, oval-flange connections up to 16 bar, and booster set working pressure up to 10 bar and clean liquid temperatures from 0 °C to +40 °C.
Which stainless steel grades and port fittings are incorporated across this unit?
Wetted build on BSM2V-2MXV-32-506-O-EMT combines AISI 304 stainless steel stages, Hard Metal-Carbon-EPDM seals, Ceramic alumina bearings, and a galvanised steel baseplate with G 2" BSP suction and G 2" BSP delivery common manifolds.
Which manufacturer warranty terms safeguard this variable speed boosting system?
Covered by official manufacturer terms, BSM2V 2MXV 32 506 O-EMT includes Calpeda UK EASYMAT warranty protection for 2 years from installation or 30 months from dispatch, whichever is shorter, providing parts and labour support against factory faults.
What highest volumetric flow rate does this variable speed system deliver?
To satisfy heavy facility draw, the 2MXV 32-506 O-EMT pump assembly modulates output up to 266.6 L/min across two pumps under coordinated inverter control.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us










