Roll over image to zoom
SKU: BSM3V 3MXHL 206-EMT
Calpeda BSM3V 3MXHL 206-EMT 3 x 1.1kW Variable Speed Triple Pump Multistage Booster Set with EasyMat Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Stepped commercial developments and busy apartment blocks require steady water pressure across fluctuating peak periods, a challenge met directly by the BSM3V 3MXHL 206-EMT booster station. Combining three horizontal multistage Calpeda MXHL 206 pumps on a unified skid, this plant delivers flow rates up to 240 L/Min. Where vertical lift is required, the multistage hydraulics can develop up to 65 m of head. Each pump unit is constructed with corrosion-resistant AISI 304 stainless steel hydraulic components to ensure hygienic, dependable fluid transfer in demanding potable and hot-water networks.
Dedicated I-MAT variable-speed frequency converters mounted directly onto each motor govern the hydraulic output with high precision. By reading live manifold pressure feedback, the onboard inverters modulate rotational speed smoothly to hold the target setpoint without pressure spikes. When consumption rises, lag pumps stage in automatically and alternate duty cycles to distribute mechanical wear evenly across all three units. Integrated diagnostic software also guards against dry running, overload conditions, and supply anomalies while tracking operational energy metrics.
Clean-water routing is handled through factory-assembled AISI 304 stainless steel manifolds featuring a 65 mm suction inlet and a 50 mm delivery outlet. Individual isolation ball valves and non-return check valves are fitted at each pump branch, allowing technicians to service any single unit without shutting down the entire building supply. The discharge header also provides a clear system pressure gauge for instant visual checks and a dedicated connection point for attaching an external diaphragm expansion tank.
Driving the assembly requires a standard single-phase 230 V electrical feed, which the onboard drives invert to supply the three-phase 230/400 V motor windings. Every pump utilizes a 2-pole induction motor rated at 1.1 kW (P2) and drawing 2.7 A under full load at a nominal speed of 2900 rpm (50 Hz). Built in compliance with IEC 60034 standards and equipped with Class F thermal insulation, the drive motors sustain continuous industrial duty cycles with minimal heat build-up.
Key Features
- Triple-Pump Redundancy: Three parallel multistage units share peak hydraulic loads and provide reliable backup capacity during routine maintenance.
- Pump-Mounted I-MAT Inverters: Individual frequency converters adjust motor speed dynamically to maintain constant line pressure and cut electricity consumption.
- Stainless Steel Wet-End: Close-coupled 6-stage impellers and diffusers crafted from AISI 304 stainless steel resist corrosion and internal scaling.
- Hygienic Manifold Assembly: AISI 304 suction and discharge headers preserve water quality and streamline mechanical room pipework connections.
- Service-Friendly Valving: Dedicated shut-off ball valves and spring check valves on every branch prevent backflow and permit isolated pump maintenance.
- Enclosure Protection: Motor housings sealed to IP54 standards with Class F insulation defend internal windings against dust ingress and moisture splashes.
- Broad Thermal Capability: Engineered to pump clean liquids across an operating temperature spectrum from -15 °C to +110 °C.
- Header Vessel Port: Pre-fitted discharge tapping allows straightforward installation of an external pressure tank to buffer minor line draw-offs.
- Manufacturer Backing: Supported by a comprehensive 24 Months factory warranty covering complete factory-tested assembly quality.
What's Included
- 3 x Calpeda MXHL 206 horizontal multistage pumps
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Integrated I-MAT frequency converters mounted on each pump
- System pressure gauge
- Factory assembled and tested boosting plant
SPECIFICATIONS
| Max Flow | 240 L/Min |
| Max Head | 65 m |
| Power | 3 x 1.1 kW / 415v |
| Rated Current | 3 x 2.7 Amps |
| Suitable For | Commercial & Residential Water Supply |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15 °C to +110 °C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What specific wetted components and three pump manifold pipework are fitted?
Three AISI 304 chromium-nickel stainless steel pumps on the Calpeda Variable Speed Booster Set BSM3V 3MXHL 206-EMT rest upon a Zinc-plated Steel S235JR Baseplate, coupled through G 2 1/2" BSP inlet and G 2" BSP outlet manifolds.
What manufacturer warranty protection coverage supports this variable speed pumping assembly?
Protection for the BSM3V 3MXHL 206-EMT is secured by Calpeda manufacturer warranty coverage guarding the pump wet end, electric motor assembly, and variable speed drive against defects from date of invoice.
What peak water discharge rate and maximum flow capacity does this package supply?
Operating with triple duty assist logic, the BSM3V-3MXHL-206-EMT achieves a collective maximum rated flow capacity of 240 L/min (14.4 m³/h) during peak demand periods.
Which electrical power mains and variable speed frequency converter regulate this booster set?
Electrical connection for the BSM3V 3 MXHL 206-EMT requires single phase 230V power at 50 Hz, driving three motors totaling 3.3 kW via three communicating EASYMAT variable speed frequency converters (230V).
Under what maximum static head elevation and line pressure limits does this package operate?
Total static head on the 3MXHL 206-EMT (BSM3V 3MXHL 206-EMT) reaches up to 65 metres, while pump casings withstand up to 10 bar across liquid temperatures up to +40°C.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us