Roll over image to zoom
SKU: BSM3V 3MXHL 207-EMT
Calpeda BSM3V 3MXHL 207-EMT 3 x 1.1kW Variable Speed Triple Pump Multistage Booster Set with EasyMat Converter
Australia-Wide
(08) 9240 2992
Official Calpeda
Peace of Mind
Product Overview
Elevated risers and sprawling commercial facilities often struggle with pressure drop on upper levels, making the BSM3V 3MXHL 207-EMT triple-pump booster set an ideal engineering choice. Equipped with three horizontal multistage Calpeda MXHL 207 pumps working in parallel, this packaged system can generate up to 75.3 m of head for tall building risers. During simultaneous fixture usage, the triplex station supplies combined flows up to 240 L/Min. Its AISI 304 stainless steel wet-end architecture guarantees clean, rust-free water delivery across hot and cold building distribution circuits.
Motor-mounted I-MAT inverters fitted to every pump motor coordinate system behaviour without requiring an external wall-mounted control cabinet. These intelligent variable-speed drives continuously match motor frequency to real-time water draw, locking in steady outlet pressure while trimming unnecessary power draw during quiet hours. Automatic lead-lag rotation balances run hours equally among the trio of pumps, and built-in electronic safeguards immediately intervene if dry-run conditions, phase loss, or thermal overloads occur.
Industrial-grade AISI 304 stainless steel suction and discharge manifolds anchor the mechanical layout, sized with a 65 mm intake header and a 50 mm delivery port. Each pump leg incorporates dedicated isolation ball valves alongside non-return check valves, preventing reverse flow and allowing seamless single-pump servicing while the remaining units stay online. An easy-to-read pressure gauge sits directly on the discharge manifold beside a threaded port ready for an external expansion vessel.
Engineered for simple electrical hookup, the system connects to a single-phase 230 V power source while driving three-phase 230/400 V motor windings through its integrated inverters. Each 2-pole induction motor delivers 1.1 kW (P2) of shaft power, operating at 2900 rpm (50 Hz) with a rated current draw of 2.7 A per unit. Conforming to IEC 60034 specifications with Class F insulation, the electric drives provide quiet, long-lasting performance under sustained hydraulic loads.
Key Features
- High-Head 7-Stage Hydraulics: Precision AISI 304 stainless steel 7-stage chambers generate the extra lift needed for taller building risers.
- Distributed Inverter Control: Individual I-MAT variable-speed drives eliminate single-point controller failure and modulate output smoothly.
- Automatic Duty Cycling: Smart staging alternates lead, lag, and standby roles across all three pumps to promote uniform wear.
- Full Stainless Headers: Corrosion-proof AISI 304 intake and delivery manifolds ensure hygienic water handling and structural rigidity.
- Independent Branch Isolation: Pre-installed ball valves and check valves let maintenance crews isolate any pump without interrupting building water flow.
- Robust Motor Sealing: Rated to IP54 ingress protection and built with Class F thermal insulation for dependable plant-room longevity.
- Wide Temperature Window: Handles chilled or heated non-aggressive water safely across a liquid range of -15 °C to +110 °C.
- Ready-To-Plumb Skid: Supplied fully piped, wired, and hydrostatically tested on a common baseplate for rapid site commissioning.
- Warranty Coverage: Backed by a 24 Months manufacturer warranty for commercial and industrial peace of mind.
What's Included
- 3 x Calpeda MXHL 207 horizontal multistage pumps
- Stainless steel AISI 304 suction manifold
- Stainless steel AISI 304 delivery manifold
- Isolation ball valves
- Non-return valves
- Integrated I-MAT frequency converters mounted on each pump
- System pressure gauge
- Factory assembled and tested boosting plant
SPECIFICATIONS
| Max Flow | 240 L/Min |
| Max Head | 75.3 m |
| Power | 3 x 1.1 kW / 415v |
| Rated Current | 3 x 2.7 Amps |
| Suitable For | Commercial & Residential Water Supply |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | -15 °C to +110 °C |
| Inlet Size | 65 mm |
| Outlet Size | 50 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which factory warranty terms back this triple pump variable speed booster against defects?
Full manufacturer warranty support protects the Calpeda Variable Speed Booster Set BSM3V 3MXHL 207-EMT, safeguarding the triple stainless pump wet ends, drive motors, and inverters from date of invoice.
What peak water discharge rate and maximum flow capacity does this package supply?
Operating with triple duty assist logic, the BSM3V 3MXHL 207-EMT achieves a collective maximum rated flow capacity of 240 L/min (14.4 m³/h) during peak demand periods.
Which electrical power mains and variable speed frequency converter regulate this booster set?
Electrical connection for the BSM3V-3MXHL-207-EMT requires single phase 230V power at 50 Hz, driving three motors totaling 3.3 kW via three communicating EASYMAT variable speed frequency converters (230V).
Under what maximum static head elevation and line pressure limits does this package operate?
Total static head on the BSM3V 3 MXHL 207-EMT reaches up to 75.3 metres, while pump casings withstand up to 10 bar across liquid temperatures up to +40°C.
What corrosion proof wetted metallurgy and manifold connection thread sizes are incorporated?
Common manifold plumbing on the 3MXHL 207-EMT (BSM3V 3MXHL 207-EMT) provides G 2 1/2" BSP suction and G 2" BSP delivery connections, joining the AISI 304 chromium-nickel stainless steel pumps on a Zinc-plated Steel S235JR Baseplate.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us