Roll over image to zoom
Ebara DWO 300 Stainless Steel Hard Faced Centrifugal Pump for Slurry Handling with Open Impeller
Australia-Wide
(08) 9240 2992
Official Ebara
Peace of Mind
Product Overview
Handling fluids that contain suspended particles requires a pump capable of maintaining consistent performance under demanding conditions, and the Ebara DWO 300 Hard Faced version is configured to meet these requirements. It is commonly used in slurry handling systems where operational stability is essential.
With a flow capacity reaching approximately 950 L/Min and a maximum head of around 15 m, the pump supports applications that require high volume transfer with controlled discharge pressure.
The hydraulic section utilises an open impeller arrangement that allows fluid to move through without obstruction. This configuration supports uninterrupted operation even when fluid consistency varies during use.
Equipped with a Silicon Carbide (SiC/SiC/Viton) mechanical seal, the pump is suited to conditions where resistance to wear is critical. The 304 stainless steel construction provides structural strength, while the close coupled layout and back pull-out design enable maintenance access without disconnecting pipework.
FEATURES
- Open impeller configuration allowing unrestricted flow passage
- Hard faced mechanical seal (SiC/SiC/Viton)
- 304 stainless steel liquid end construction
- Close coupled design for compact installation
- Back pull-out construction for simplified maintenance
- Top centreline discharge reducing pipe stress
- Foot support under motor for improved structural alignment
- Engineered for continuous duty operation
SPECIFICATIONS
| Max Flow | 950 L/Min |
| Max Head | 15 m |
| Power | 2.2 kW / 415v |
| Rated Current | 4.5 Amps |
| Suitable For | Slurry Handling |
| Body Material | 304 Stainless Steel |
| Liquid Temperature | Maximum 110°C |
| Inlet Size | 50 mm |
| Outlet Size | 65 mm |
| Warranty | 12 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which seal material supports abrasive liquid handling?
A Silicon Carbide mechanical seal with SiC/SiC/Viton faces equips the DWO_300_HF, supporting resistance to wear in abrasive service conditions during extended operation.
Which applications are identified for this hard-faced pump?
Slurry-handling systems are identified for the DWO 300 HF, where suspended particles make wear resistance an important part of pump selection.
What maximum flow can this pump deliver?
Approximately 950 L/Min of flow is available from the DWO-300-HF for installations requiring high-volume transfer and consistent liquid movement during process operation.
What maximum head does the pump provide?
A maximum head of around 15 m is specified for the DWO/300/HF, supporting systems that require high flow with controlled discharge pressure.
What construction allows routine internal maintenance access?
The close-coupled design and back pull-out construction let technicians service the DWO300HF internally without disconnecting its installed pipework during scheduled service work.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us