Roll over image to zoom
SKU: 93637548
Grundfos Hydro MPC-E 2 x CRIE 10-1 Single Phase 2 x 0.75kW Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Where expanding commercial sites whose original mains feed no longer keep pace are served from a single booster, the Hydro MPC-E 2 CRIE 10-1 holds pressure steady as two CRIE 10-1 pumps respond to changing flow. The complete system ships factory assembled and tested under part number 93637548.
This set provides up to 512 L/min of flow capacity. Variable-speed operation can develop up to 14 metres of head where required. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
For installation, the booster is supplied pre-assembled with stainless steel manifolds, two 50 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It is designed for 1 x 230 V power at 50 Hz with a rated current of 6.7 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C.
Its home ground covers industry, high-rise developments and irrigation schemes. The variable-speed system suits clean-water boosting duties with changing demand.
Features
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Stainless steel manifolds provide two 50 mm manifold connections ready for pipework.
- A suction-side pressure sensor guards the pumps against dry running.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Control decisions come from real pump curves, not generic models, via the GENIECON UNIT.
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- The system pairs two CRIE 10-1 pumps in parallel duty, controlled as a single coordinated system.
- Each main pump is rated 0.75 kW (P2), so per-pump draw scales down as speed follows demand.
- Energy draw matches the actual job because speed follows demand, not a fixed curve.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
What's Included
- 2 x Grundfos CRIE 10-1 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 512 L/Min |
| Max Head | 14 m |
| Power | 2 x 0.75 kW / 240v |
| Rated Current | 6.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
How much total dynamic head pressure can this multi stage booster package maintain?
Under peak line requirements, the Grundfos Hydro MPC-E 2 CRIE 10-1 VN GA-A-A-AG delivers a maximum vertical head of 14 m and accommodates working system pressures up to 16 bar.
How are the pumps interconnected via common stainless steel suction and discharge manifolds?
Factory pipework configuration on the Hydro MPC-E 2 CRIE 10-1 incorporates R 2 1/2" stainless steel manifolds, complete with individual pump isolating valves and line non-return valves.
What manufacturer warranty terms back this complete packaged booster package?
Factory backing for the Hydro-MPC-E-2-CRIE-10-1 includes an authentic Grundfos two-year manufacturer warranty covering the pumps, drive electronics, and skid assembly.
How much fluid volume can the parallel centrifugal wet ends discharge when operating together?
At full operational capacity, the Hydro MPC E 2 CRIE 10 1 provides up to 512 L/min total water throughput to satisfy heavy facility consumption requirements.
Which permanent magnet or inverter electric motors power this parallel pump assembly?
Power for the 2 CRIE 10-1 (Hydro MPC-E) is delivered via two high-efficiency variable frequency drive MGE electric motors of 0.75 kW each, wired for a 1 x 230 V electrical supply with built-in speed regulation.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us