Roll over image to zoom
SKU: 93637558
Grundfos Hydro MPC-E 2 x CRIE 10-3 Three Phase 2 x 2.2kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Gymnasiums, aquatic centres and student housing running wall-to-wall showers get a constant-pressure answer in this Grundfos Hydro MPC-E 2 CRIE 10-3 set. Everything is ordered under the single part number 93637558.
Flow capacity reaches 521 L/min. Up to 43 metres of head is available to maintain pressure as demand changes. Control sits with the GENIECON multi-pump controller in its touch-equipped panel, adjusting each pump individually and rotating duty by load, run hours and faults.
For installation, the booster is supplied pre-assembled with stainless steel manifolds, two 50 mm manifold connections, isolation valves, non-return valves, pressure sensors and a gauge, plus an 8L diaphragm tank. It is designed for 3 x 415 V power at 50 Hz with a rated current of 8.9 A, with IP54 motor protection and a 16 bar maximum system pressure. Liquid-temperature suitability is 5°C to 60°C.
Applications include industry, water supply networks and irrigation schemes. The control flexibility suits clean-water boosting in new installations and upgrades.
Features
- A suction-side pressure sensor guards the pumps against dry running.
- Frequency converters on the motors pair with permanent magnet motors for efficient part-load operation.
- Rated 2.2 kW (P2) on every main pump in the frame.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- Pump staging follows demand automatically: pumps enter at low speed as pressure drops, ramp to equal speed, and exit as flow fades.
- Two Grundfos CRIE 10-3 vertical multistage pumps run in parallel on one common base frame.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
- The package is wet-tested and pre-configured, requiring only pipework and power on site.
- Rated for 16 bar system pressure; motors carry IP54 protection.
- Constant pressure control holds the delivered pressure flat while proportional mode lets setpoints flex with demand.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
What's Included
- 2 x Grundfos CRIE 10-3 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 521 L/Min |
| Max Head | 43 m |
| Power | 2 x 2.2 kW / 415v |
| Rated Current | 8.9 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
Which factory warranty terms protect this complete multi pump booster package?
The complete factory package of the Grundfos Hydro MPC-E 2 CRIE 10-3 V1 GA-A-A-AG is supported by a Grundfos two-year manufacturer warranty encompassing the base skid, motors, and wet ends.
What peak flow rate can this parallel multistage pump package supply to the distribution network?
Meeting high volumetric requirements, the Hydro MPC-E 2 CRIE 10-3 achieves a maximum water delivery capacity of 521 L/min through coordinated parallel pump operation.
What electrical motor drive setup provides variable speed propulsion across this booster package?
Mechanical drive on the Hydro-MPC-E-2-CRIE-10-3 features two inverter-controlled variable frequency drive MGE electric motors producing 2.2 kW per pump, powered by a 3 x 415 V connection for energy-optimised water delivery.
What vertical lift head and maximum working pressure rating does this booster set provide?
Discharge pressure performance allows the Hydro MPC E 2 CRIE 10 3 to achieve up to 43 m maximum dynamic head under a 16 bar rated system pressure.
How are the inlet and discharge connections configured across the parallel pump manifolding?
Interconnecting pipework on the 2 CRIE 10-3 (Hydro MPC-E) features factory-fitted R 2 1/2" stainless steel suction and discharge manifolds fitted with non-return check valves and isolation valves.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us