Roll over image to zoom
SKU: 93637573
Grundfos Hydro MPC-E 2 x CRIE 10-9 Three Phase 2 x 5.5kW 304ss Booster System w/8L Tank and CU 352 Controller
Australia-Wide
(08) 9240 2992
Official Grundfos
Peace of Mind
Product Overview
Gymnasiums, aquatic centres and student housing running wall-to-wall showers get a constant-pressure answer in this Grundfos Hydro MPC-E 2 CRIE 10-9 set. One factory-tested package replaces a shelf of loose components; order part number 93637573 to put it on site.
Flow capacity reaches 519 L/min. Up to 131 metres of head is available to maintain pressure as demand changes. A Grundfos GENIECON PANEL on the common base frame provides the system control; the GENIECON UNIT within it holds the exact hydraulic and electrical data of the pumps, so staging and changeover decisions are based on the pumps' actual curves.
The two-pump package arrives as one base-mounted assembly with stainless steel manifolds, two 50 mm manifold connections, valves, sensors and a pressure gauge, plus an 8L diaphragm tank. Electrical supply is 3 x 400 V at 50 Hz with a rated current of 20.7 A. The motors have IP54 protection and the system is rated to 16 bar maximum pressure. Liquid-temperature suitability is 5°C to 60°C.
Its home ground covers high-rise developments, water supply networks and industry. The variable-speed system suits clean-water boosting duties with changing demand.
Features
- Cascade logic brings pumps on-line and off-line against changing demand without manual intervention.
- Two Grundfos CRIE 10-9 vertical multistage pumps run in parallel on one common base frame.
- Inlet pressure monitoring provides dry-running protection if the suction supply is insufficient.
- GENIECON PANEL control with touch display gives operating staff full staging visibility.
- The set ships with an 8L precharged diaphragm tank for low-flow stability.
- Maximum operating pressure of 16 bar with motors sealed to IP54.
- Variable speed comes from frequency converters matched to permanent magnet motors, keeping the booster set in its efficient range.
- At P2 each main pump is 5.5 kW, covering the duty without oversizing the frame.
- Both constant-pressure and proportional-pressure modes are available, so plant rooms can tune response to pipework.
- Slow-speed duty and staged switching keep consumption down through low-demand hours.
- The GENIECON UNIT applies the pumps' exact hydraulic and electrical data when making control decisions.
- Factory assembled and wet-tested, the set arrives pre-configured for straightforward installation.
- The stainless steel manifold assembly is supplied with two 50 mm manifold connections.
What's Included
- 2 x Grundfos CRIE 10-9 vertical multistage pumps
- IE5 permanent magnet motors with integrated frequency converters
- GENIECON PANEL with touch display
- GENIECON multi-pump control unit
- Stainless steel suction manifold
- Stainless steel discharge manifold
- Non-return valves
- Isolation valves
- Pressure sensors/transmitters
- Pressure gauge
- Inlet pressure monitoring (dry-run protection)
- 8L diaphragm pressure tank
- Factory assembled and tested booster system
SPECIFICATIONS
| Max Flow | 519 L/Min |
| Max Head | 131 m |
| Power | 2 x 5.5 kW / 415v |
| Rated Current | 20.7 Amps |
| Suitable For | Commercial Water Supply, Irrigation and Transfer Duty |
| Body Material | Stainless Steel |
| Liquid Temperature | 5°C – 60°C |
| Inlet Size | 65 mm |
| Outlet Size | 65 mm |
| Warranty | 24 Months |
Warranty & Returns
All products supplied by Foundation Pumps are covered by a minimum 12-month warranty unless otherwise stated. Some brands may offer longer manufacturer warranties. Warranty covers manufacturing defects, faulty materials and workmanship under normal use.
- Products must be installed correctly and in accordance with the manufacturer’s instructions.
- Warranty does not cover incorrect installation, misuse, dry running, normal wear and tear, unauthorised repairs or damage caused by external factors.
- Proof of purchase, photos, videos and installation details may be requested when assessing a warranty claim.
- The customer is responsible for returning the product to Foundation Pumps or the nominated service centre unless otherwise agreed.
- Removal, reinstallation, labour and associated site costs are generally the customer’s responsibility unless required under Australian Consumer Law.
- Change-of-mind returns may be accepted within 30 days provided the product is unused, uninstalled and returned in its original packaging.
- Customers are responsible for return freight costs for change-of-mind returns.
- Restocking fees may apply to special-order, bulky or non-stocked products.
- Used, installed or specially ordered products may not be eligible for change-of-mind returns.
- If a product arrives damaged or faulty, please contact Foundation Pumps as soon as possible so we can assist with the appropriate repair, replacement or refund.
Your rights under Australian Consumer Law are not affected.
What vertical discharge head and system pressure rating does this packaged booster unit generate?
Under peak line requirements, the Grundfos Hydro MPC-E 2 CRIE 10-9 V1 GA-A-A-AG delivers a maximum vertical head of 131 m and accommodates working system pressures up to 16 bar.
Which pipe connection fittings and check valves are assembled onto this packaged booster skid?
Factory pipework configuration on the Hydro MPC-E 2 CRIE 10-9 incorporates R 2 1/2" stainless steel manifolds, complete with individual pump isolating valves and line non-return valves.
Under what factory warranty coverage is this multi pump booster skid supplied?
Factory backing for the Hydro-MPC-E-2-CRIE-10-9 includes an authentic Grundfos two-year manufacturer warranty covering the pumps, drive electronics, and skid assembly.
What volumetric water flow does this packaged booster assembly supply for high demand installations?
At full operational capacity, the Hydro MPC E 2 CRIE 10 9 provides up to 519 L/min total water throughput to satisfy heavy facility consumption requirements.
What motor drive hardware powers and modulates the centrifugal pumps on this booster package?
Power for the 2 CRIE 10-9 (Hydro MPC-E) is delivered via two high-efficiency variable frequency drive MGE electric motors of 5.5 kW each, wired for a 3 x 400 V electrical supply with built-in speed regulation.
Need help choosing the right pump?
Our team of pump experts are here to help you find the perfect solution for your application.
- Free expert advice
- Pump sizing & system recommendations
- Fast response — call or email us